Items where Subject is "Quality control. Standards"

A

Abd Ghani, Nur Faeizah (2008) Wood destroying fungi / Nur Faeizah Abd Ghani. (2008) [Student Project] (Unpublished)

Abd Razak, Nur Nabihah (2017) Framework development of quality control for construction site inspection / Nur Nabihah Abd Razak. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Abdul Ghafar, Kamal Hilmi and Ahmad, Mohd Ajwad and Mohd Sharif, Mohd Syukri and Mhd Nordin, Mohamad Hamdan (2008) Properties of cement bonded particleboard from 16 years old petai belalang (Leuceana leucocephala) / Kamal Hilmi Abdul Ghafar … [et al.]. (2008) [Student Project] (Unpublished)

Abdul Wahab, Muhamad Amran (2009) Natural wood defect / Muhamad Amran Abdul Wahab. (2009) [Student Project] (Unpublished)

Ahmad Yeob Hanis, Ahmad Azuarrulsaini (1993) Hydrological data processing and quality control of observations on rainfall and river flow. (error calibration, a case study of Sungai Kemasin - Pengkalan Datu at Peringat, Kelantan) / Ahmad Azuarrulsaini Ahmad Yeob Hanis. (1993) [Student Project] (Unpublished)

Alias, Siti Amirah (2017) Implementation of Six Sigma using DMAIC methodology in sugar industry. (2017) [Student Project] (Unpublished)

Anuar, Mohd Fathul Haqim and Abd Karim, Siti Fatma (2017) Implementation of six sigma methodology in the packaging manufacturing process: article. (2017) pp. 1-6.

Asim, Norvina and Umat, Nor Fawanih (2011) Employee`s tolerance toward change : A case study of the implementation of MS : ISO in Pos Malaysia Bhd. / Norvina Asim and Nor Fawanih Umat. (2011) [Student Project] (Unpublished)

Avon, Herbert Mering and Alisah, Norfadtihah (2007) Performance of cement bonded particleboard (CBPB) from Petai Belalang at three difference wood cement ratio / Herbert Mering Avon and Norfadtihah Alisah. (2007) [Student Project] (Unpublished)

Aziz, Siti Kehirah (2008) Wood destroying agent: powderpost beetles attack on wood / Siti Kehirah Aziz. (2008) [Student Project] (Unpublished)

I

Ibrahim, Mohd Ikram and A. Rahaman, Muhamad Amin (2008) Quality control by furniture manufacture / Mohd Ikram Ibrahim and Muhamad Amin A. Rahaman. (2008) [Student Project] (Unpublished)

Ibrahim, Muhamad Hasbi and Sarif, Mohd Sufian and Tajie, Norul Azliza and Sharuddin, Rafidah (2010) Effect of resin content and board density on Yamani (Gmeliana Arborea). (2010) [Student Project] (Unpublished)

Ikau, Roseline and Joseph, Corina (2017) Environmental legislation awareness among construction contractors in Malaysia / Roseline Ikau and Corina Joseph. (2017) International Journal of Service Management and Sustainability (IJSMS), 2 (2). pp. 1-21. ISSN 2550-1569

J

Jais, Mohd Arifuddin and Radzali, Mohd Nor Effendi and Yusoff, Nor Aini (2010) Chemical composition of Kelempayan (Neomalarckia Cadamba), Pulai (Alstonia Angustiloba), and Sesendok (Endospermum Diadenum). (2010) [Student Project] (Unpublished)

Jensen, Ishmael Kelvin and Osman, Sharina and Che Mat, Che Rosmawati (2024) RESTSERV: restaurant service quality model for Malaysia / Ishmael Kelvin Jensen, Sharina Osman and Che Rosmawati Che Mat. (2024) Social and Management Research Journal (SMRJ), 21 (2): 10. pp. 133-145. ISSN 0128-1089

K

Khusaini, Nurul Syuhadah (2014) Development of Lean ISO 9001:2008 theoretical framework using RASCH model in Malaysian food and beverages industry / Nurul Syuhadah Khusaini. (2014) Masters thesis, thesis, Universiti Teknologi MARA.

M

Mahmod, Razmah and Mashahadi, Faizah and Ashari, Nur Amirah (2017) The influence of lean six sigma and Kaizen to reduce defect products in automotive industry / Razmah Mahmod, Faizah Mashahadi and Nur Amirah Ashari. (2017) Journal of Emerging Economies and Islamic Research (JEEIR), 5 (4). pp. 1-10. ISSN 2289-2559

Maniam, Kaliannan and Ahmad, Jasmine (2005) A roadmap for the implementation of ISO 9001:2000 in academia: 9 steps to certification by FSPP, UiTM. / Maniam Kaliannan and Jasmine Ahmad. (2005) Malaysian Journal of Quality, 1. pp. 83-91. ISSN 1823-7347

Mansor, Mohd. Hezri and Rahim, Muhammad Roslan and Sa’im, Mohd Adi Hazly (2005) Case study of chicken slaughterhouse / Mohd. Hezri Mansor, Muhammad Roslan Rahim and Mohd Adi Hazly Sa'im. (2005) [Student Project] (Unpublished)

Marzaini, Abidah and Selamat, Norhafizah and Mohd Azhari, Surayati (2010) Properties of paper from Acacia Mangium (Mature tree) using soda pulping. (2010) [Student Project] (Unpublished)

Masjoni, Nor Farah Atika (2015) A study on customer satisfaction of facilities management & safety aspect in shopping mall / Nor Farah Atika Masjoni. (2015) [Student Project] (Unpublished)

Maslin Ya'acob, Yusmarina (2006) Interpretation of building regulations by local authorities / Yusmarina Maslin Ya'acob. (2006) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mat Din, Muhamad Huzwa and Mohd Sanip, Muhamad Najaaid Izzat and Ahmad Nadzri, Seri Nur Iman Hidayah (2012) Extractives and ash content of oil palm trunk (Elaeis Guineensis). (2012) [Student Project] (Unpublished)

Mat Saat, Nurul Asmizah and Ghazali, Rohaida and Mahhassan, Nurhasmy (2007) Properties of kraft paper using different percentage of active alkali / Nurul Asmizah Mat Saat, Rohaida Ghazali and Nurhasmy Mahhassan. (2007) [Student Project] (Unpublished)

Md Lazim, Mohd Fadzil (2002) Study process and proposal improvement of safety glass production / Mohd Fadzil Md Lazim. (2002) Diploma thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohamad Afandi, Mohamad Hafiz Helmy and Mat Hussin, Mohd Ikhram Azzarudin and Pauzi, Mohd Khairy (2012) Mechanical & physical properties of wood cement board from Kelempayan (Anthocepalus Chinensis) & Acacia (Acacia Mangium) using different particle sizes. (2012) [Student Project] (Unpublished)

Mohd Khalid, Nahzatul Ain (2022) The implementation and maintenance of ISO 9001:2015 quality management system in a Malaysian legal firm / Nahzatul Ain Mohd Khalid. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Sanusi, Zuraidah and Mat Isa, Yusarina and Johari, Razana Juhaida and Ghazali, Aziatul Waznah and Mohamad, Siti Salwa (2012) Client assessment on audit firm's quality (CAAF-Q) / PM Dr. Zuraidah Mohd Sanusi … [et al.]. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka, p. 52.

Mohd Suhaili, Mohd Aniz Anizar (2007) Wood defects categories. (2007) [Student Project] (Unpublished)

Mustafa, Hishammuddin (1999) Keberkesanan "Quality Assurance" di industri seramik Malaysia / Hishammuddin Mustafa. (1999) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

R

Ramli, Normurni (2007) Wood preservation in Malaysia / Normurni Ramli. (2007) [Student Project] (Unpublished)

Razali, Norhalimahtus Saadiah and Mohd Hazan, Noor Ain and Noh, Izzah Azimah (2012) Manufacturing of particle board from oil palm frond. (2012) [Student Project] (Unpublished)

Ripaai, Ahmad Husni and Kamaruddin, Mohamad Amirul and Abdul Karim, Muhammad Syarafi (2012) Properties of Kelempayan particleboard with different resin content (10%, 11% and 12%). (2012) [Student Project] (Unpublished)

S

Salamudin, Norhana and Ismail, Noraini and Abdullah, Hazman Shah (2005) Building ISO 9000 based quality management systems in education : the case of the Faculty of Business Management, UiTM Shah Alam / Norhana Salamudin, Noraini Ismail and Hazman Shah Abdullah. (2005) Social and Management Research Journal (SMRJ), 2 (2). pp. 41-52. ISSN 1675-7017

Shahidan, Faiezah (2009) Improvement of the quality inspection process flow at production and planning control packaging line at Autokeen Sdn Bhd / Faiezah Shahidan. (2009) [Student Project]

Syamsir, Syahrul Ikhlash and Ramli, Mohd Haniff and Abd Kadir, Azhari (2010) Preliminary study on properties of single layer binderless particleboard from oil palm frond. (2010) [Student Project] (Unpublished)

T

Tamiran, Siti Nor Ain and Shahriman, Nor Suziana and Razak, Nor Ashikin (2009) Properties of particleboard from oil palm trunk particles: influences of particle size, resin content and board density. (2009) [Student Project] (Unpublished)

W

Wan Mohamad Tahir, Wan Nurul Aziera Ameera (2019) Measuring service quality towards organizational performance using SERVQUAL model appoaches / Wan Nurul Aziera Ameera Wan Mohamad Tahir. (2019) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Y

Yulius, Shalynna Yurika (2013) Examining packaging factors as an aesthetic towards consumer purchase decision : a study towards 1Malaysia products Kota Kinabalu area / Shalynna Yurika Yulius. (2013) [Student Project] (Unpublished)

Z

Zahari, Khairul Ezwan (2016) Improvement of process cap ability index (Cpk) of bond line thickness (BLT)/die tilt for die attach process in semiconductor manufacturer / Khairul Ezwan Zahari. (2016) [Student Project] (Unpublished)

Zahari, Zarila and Mohd Roslin, Rosmimah and Teo, Carol, Boon Chui (2016) Attaining competitive advantage through market orientation of Public Higher Education Institutions: mediating effect of quality assurance / Zarila Zahari, Rosmimah Mohd Roslin and Carol Teo Boon Chui. (2016) Advances in Business Research International Journal, 2 (2). pp. 1-9. ISSN 2462-1838

Zakaria, Muhammad Khalaf and Mohamod, Muhammad Imran and Razali, Muhamad Zulhilmi and Engku Fakri, Engku Syahmi Arif and Husin, Syuwari (2012) Ash and lignin content of two Malaysian bamboo species. (2012) [Student Project] (Unpublished)