Items where Subject is "Aeronautics. Aeronautical engineering"
- Library of Congress Subject Areas (175)
- T Technology (46)
- TL Motor vehicles. Aeronautics. Astronautics (23)
- Aeronautics. Aeronautical engineering (23)
- Aircraft (1)
- Wind tunnels (9)
- Aeronautics. Aeronautical engineering (23)
- TL Motor vehicles. Aeronautics. Astronautics (23)
- T Technology (46)
A
Drone x-ray / Lily Suryani Azmi Lee ... [et al.]. (2019) [Entrepreneurship Project] (Submitted)
Experimental Investigation on the Ballistic Resistance of Aluminium Plate under High Velocity Impact / Mohd Rozaiman Aziz ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 12-24. ISSN 18235514
On the Effect of Central Jet in Solid Cone Pressure-Swirl Atomizers / Ahmad H. A. Hamid ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 260-271. ISSN 18235514
The experience of MAS in the operation and maintenance of aero-gas turbine engines / Mohamed Saiful Hady Ahmad and Azirul Fahmie Soid. (1995) [Student Project] (Unpublished)
Digital compass for inertial navigation system / Nuridora Abdul Razak. (2006) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).
Comparative study on satellite base air monitoring system / Norsyuhaimy Abdul Shukor. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).
Aerodynamic performance of MAV wing with fuselage and stabilizer \ Muhammad Izzuddin Arif Abdul Samad. (2017) [Student Project] (Unpublished)
Study of aerodynamics on the analysis for Blended Wing Body (BWB) Unmanned Aerial Vehicle (UAV) using Computatonal Fluid Dynamics (CFD) for high subsonic flow / Mohd Yusof Safaruddin Abdulawi. (2006) Degree thesis, thesis, Universiti Teknologi MARA.
Induced drag analysis of multi-winglets for aerodynamic performance on NACA 23015 / Zaim Ariefin Azwan Affendi Nual. (2020) [Student Project] (Unpublished)
Case Study : NZAA Trading / Syaidatul Umairah Solehah Abas. (2020) [Entrepreneurship Project] (Unpublished)
C
The Effects of Tail-Tilt on the Yaw Stability of Baseline-V Blended Wing Body Aircraft / Nur Syazwani C.M and Rizal E.M. Nasir. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 60-73. ISSN 18235514
Experimental aerodynamics of Blended Wing Body (BWB) unmanned aerial vehicle (UAV) with elevator deflection of +5° and -5° using wind tunnel (Mach number 0.1-0.15) / Che Wan Zaidie Che Wan Idris. (2009) Degree thesis, thesis, Universiti Teknologi MARA.
D
The formation of precipitate influence resistant on stress corrosion cracking of AA 7075 alloy / Rasdi Deraman, Mohd Rozaiman Aziz and Yusli Yaakob. (2009) [Research Reports] (Unpublished)
Design of power device sizing and integration for solar-powered aircraft application / Safyanu Bashir Danjuma, Zamri Omar and Mohd Noor Abdullah. (2021) Journal of Mechanical Engineering, 18 (3): 13. pp. 215-232. ISSN https://jmeche.uitm.edu.my/
E
Longitudinal static stability of a blended wing-body unmanned aircraft with canard as longitudinal control surface / Rizal E. M. Nasir, Wahyu Kunjoro and Wirachman Wisnoe. (2012) Journal of Mechanical Engineering (JMechE), 9 (1). pp. 99-121. ISSN 1823-5514 ; 2550-164X
H
The investigation of fin plate of MiG-29 aircraft made of aluminium alloy D19 using conventional ultrasonic testing (A-Scan System) / Siti Nur Hasanah Hamzah. (2013) [Student Project] (Unpublished)
Aerodynamics performance of optimal wing profile on MAV wing / Siti Khatijah Hamdan. (2017) [Student Project] (Unpublished)
Graphical representation of digital compass and altimeter / Siti Zuraini Harun. (2014) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).
Thrust test stand for pulse jet engine / Hamirul Adli Hashim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).
Aerodynamics performance of optimal wing profile on MAV wings / Siti Khatijah Hamdan. [Student Project] (Submitted)
The design of a high aspect ratio HALE aircraft composite wing. part II: buckling and flutter speed analysis / Bambang K. Hadi and IndraPermana. (2015) Journal of Mechanical Engineering (JMechE), 12 (2). pp. 14-25. ISSN 1823-5514 ; 2550-164X
Develop a remote control aircraft for crop spraying / Noor Shuhada Hussin. (2004) Degree thesis, thesis, Universiti Teknologi MARA.
Aerodynamic performance of O-ring paper plane \ Amirul Ashraf Hassan. (2017) [Student Project] (Unpublished)
Design of Blended Wing Body (BWB) Unmanned Aerial Vehicle (UAV) engine nacelle / Asrul Azuwar Hashim. (2006) Degree thesis, thesis, Universiti Teknologi MARA.
I
Design selection for new in-flight food delivery and waste collection system of commercial passenger transport aircraft using TOPSIS / Farah Diana Ishak and Fairuz Izzuddin Romli. (2021) Journal of Mechanical Engineering, 18 (3): 13. pp. 233-245. ISSN 2550-164X
Flight performance analysis of a radio controlled airplane / Luthffi Idzhar Ismail. (2010) Degree thesis, thesis, Universiti Teknologi MARA.
M
The Effect of Elevons Deflection to Aerodynamic Coefficients of A Tail-less Blended Wing-Body Planform / Rizal E. M. Nasir ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 151-166. ISSN 18235514
Freestream Velocity Correction in Narrow Channels / Helmey Ramdhaney Mohd Saiah ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 54-66. ISSN 18235514
Quality Function Deployment for New Standing Cabin Concept of Commercial Transport Aircraft / Norhafizah M. Dasuki and Fairuz I. Romli. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 247-257. ISSN 18235514
Experimental determination of the effect of turbulent intensity on aerodynamic characteristics of Remotely Piloted Vehicle / Zurriati Mohd Ali, Ow Chee Sheng and Mohd Zulkifly Abdullah. (2007) [Research Reports] (Unpublished)
Design a small wind tunnel studies for boundary layer experiment / Mohd Effandy Mukhtar. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).
Sliding mode control design using linear matrix inequality for unmanned aerial vehicle / Nor Laili Mahmud. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).
Effects of canard configuration on the aerodynamics of blended wing body at low mach number / Zurriati Mohd Ali. (2015) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).
The concept of vertical take-off and landing by using UAV mini model / Abdullah Syahril Mat Jani. (2004) Degree thesis, thesis, Universiti Teknologi MARA.
Adjustable free boundary layer floor mechanism for UiTM aerospace wind tunnel / Mohd Aswadi Mohd Razali. (2009) Degree thesis, thesis, Universiti Teknologi MARA.
Experimental aerodynamics of washout twist morphing MAV wing / Muhammad Hakim Mohd Hafiz. (2017) [Student Project] (Unpublished)
Eurodynamic Sdn. Bhd. / Sharina Mohd Nasir, Atfina Naemah Omar and Nursalwa Samsuri. [Entrepreneurship Project] (Unpublished)
Aerodynamics prediction of multi-purpose UAV using wind tunnel experimental approach / Ghazirah Mustapha @ Mustafa, Zurriati Mohd Ali, Wirachman Wisnoe. (2009) [Research Reports] (Unpublished)
Design of composite material that promoting in-plane auxetic behaviour / Syarmizar Mohd Safki. (2006) Degree thesis, thesis, Universiti Teknologi MARA.
N
An aerodynamic performance of MAV wings / Nik Muhammad Muzammil Nik Mustapa. (2016) [Student Project] (Unpublished)
The study of the aircraft navigation systems: radio navigation system as a model / Ahmad Nazri Nasir and Ruszaini Ariffin. (2000) [Student Project] (Submitted)
The strengthening of aluminium 2024 sheet by accelerated aging / Syafruddin Noer. (2007) Masters thesis, thesis, Universiti Teknologi MARA.
Aerodynamic Performances of MAV Wing Shapes / N. I. Ismail...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 187-198. ISSN 18235514
R
Design parameters for the development of wing test rig for static test experiment / Ramzyzan Ramly … [et_al.]. (2010) [Research Reports] (Unpublished)
S
Stall behavior curved planform wing analysis with low reynolds number on aerodynamic performances of wing airfoil eppler 562 / Setyo Hariyadi S.P. ... [et al.]. (2022) Journal of Mechanical Engineering (JMechE), 19 (1): 20. pp. 201-220. ISSN (eISSN): 2550-164X
SME aerospace: improving bonding shop processes / Abdul Rahim sakrani and Halisyahbana Hamzah. (1997) [Student Project] (Unpublished)
T
A new fuel cell powered aerospace propulsion system / Thomas Arthur Ward … [et al.]. (2010) [Research Reports] (Unpublished)
W
Modelling and control for longitudinal dynamics of aircraft system / Nurbaiti Wahid, Mohd Aldrin Ali & Nordiana Mukahar. (2012) [Research Reports] (Unpublished)
Wind Tunnel Tests of UiTM Blended Wing Body - Unmanned Aerial Vehicle (BWB-UAV) Prototype / Wirachman Wisnoe ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 234-245. ISSN 18235514
Design and flight analysis of the Kenyalang-1 fuel cell powered unmanned aircraft / Thomas A. Ward. (2012) Journal of Mechanical Engineering (JMechE), 9 (1). pp. 19-44. ISSN 1823-5514 ; 2550-164X
Aeronautical revenues optimisation model (AROM) for regional airports via airside operations stochastic baseline matrix analysis / Wan Mazlina Wan Mohamed. (2016) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).