Items where Subject is "Mechanics of flight: Aerodynamics"
- Library of Congress Subject Areas (1)
- T Technology (1)
- TL Motor vehicles. Aeronautics. Astronautics (2)
- Aeronautics. Aeronautical engineering (2)
- Mechanics of flight: Aerodynamics (24)
- Aeronautics. Aeronautical engineering (2)
- TL Motor vehicles. Aeronautics. Astronautics (2)
- T Technology (1)
A
A. Ismael, Mhadi and R. Heikal, Morgan and A. Aziz, A. Rashid and El-Adawy, Mohammed (2018) The effect of injection pressure on the droplet size distributions and micro-explosion / Mhadi A. Ismael ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 91-102. ISSN 18235514
Abdul Samad, Muhammad Izzuddin Arif
(2017)
Aerodynamic performance of MAV wing with fuselage and stabilizer \ Muhammad Izzuddin Arif Abdul Samad.
(2017)
[Student Project]
(Unpublished)
Abu Bakar, Azinoor Azida and Baki, Aminuddin and Yusop, Zulkifli and Ali, Mohd. Fozi and Khalil, Muhammad Khairudin and Atan, Ismail and Abd. Latif, Zulkiflee
(2013)
Interception loss canopy cover, C formulation theory / Azinoor Azida Abu Bakar … [et al.].
(2013)
[Research Reports]
(Unpublished)
Abu Bakar, Mohd Yusri
(2005)
Aerodynamic study on go-kart using computer aided tools / Mohd Yusri Abu Bakar.
(2005)
Degree thesis, thesis, Universiti Teknologi MARA (UiTM).
Amkaromi, Amiruddin
(2005)
To study and simulate the concept of ramjet / Amiruddin Amkaromi.
(2005)
Degree thesis, thesis, Universiti Teknologi MARA.
Azwan Affendi Nual, Zaim Ariefin
(2020)
Induced drag analysis of multi-winglets for aerodynamic performance on NACA 23015 / Zaim Ariefin Azwan Affendi Nual.
(2020)
[Student Project]
(Unpublished)
H
Hamdan, Siti Khatijah
(2017)
Aerodynamics performance of optimal wing profile on MAV wing / Siti Khatijah Hamdan.
(2017)
[Student Project]
(Unpublished)
Hamdan, Siti Khatijah
Aerodynamics performance of optimal wing profile on MAV wings / Siti Khatijah Hamdan.
[Student Project]
(Submitted)
Hassan, Amirul Ashraf
(2017)
Aerodynamic performance of O-ring paper plane \ Amirul Ashraf Hassan.
(2017)
[Student Project]
(Unpublished)
J
Jerai@Junaidi, Fauziah (2007) Behaviour of symmetrical and asymmetrical geometries in fully immersed flow / Fauziah Jerai @ Junaidi. (2007) Masters thesis, thesis, Universiti Teknologi MARA.
M
M. Nasir, Rizal E. and Basri, Ilyas H. and M. Ahmad, Aiman and A. Latif, Zulfazli A. and Wisnoe, Wirachman and Kuntjoro, Wahyu (2017) The Effect of Elevons Deflection to Aerodynamic Coefficients of A Tail-less Blended Wing-Body Planform / Rizal E. M. Nasir ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 151-166. ISSN 18235514
Mohamad, Firdaus and Kajishima, Takeo (2021) Large-eddy simulation of unsteady pitching aerofoil using a oneequation subgrid scale (SGS) model based on dynamic procedure / Firdaus Mohamad and Takeo Kajishima. (2021) Journal of Mechanical Engineering (JMechE), 8 (1). pp. 157-173. ISSN (eISSN):2550-164X
Mohd Ali, Zurriati
(2015)
Effects of canard configuration on the aerodynamics of blended wing body at low mach number / Zurriati Mohd Ali.
(2015)
PhD thesis, thesis, Universiti Teknologi MARA (UiTM).
Mohd Ali, Zurriati and Ow, Chee Sheng and Abdullah, Mohd Zulkifly
(2007)
Experimental determination of the effect of turbulent intensity on aerodynamic characteristics of Remotely Piloted Vehicle / Zurriati Mohd Ali, Ow Chee Sheng and Mohd Zulkifly Abdullah.
(2007)
[Research Reports]
(Unpublished)
Mohd Hafiz, Muhammad Hakim
(2017)
Experimental aerodynamics of washout twist morphing MAV wing / Muhammad Hakim Mohd Hafiz.
(2017)
[Student Project]
(Unpublished)
Mohd Noh, Mohd Hafiz and Abdul Hamid, Ahmad Hussein and Hanif, Muhammad Shahrul Azryn Hanif (2025) Improvement of aerodynamic analysis on helicopter rotor blade by applying passive flow control / Mohd Hafiz Mohd Noh, Ahmad Hussein Abdul Hamid and Muhammad Shahrul Azryn Hanif. (2025) Journal of Applied Engineering Design & Simulation (JAEDS), 5 (1): 4. pp. 37-46. ISSN 2805-5756
Mustaffa, Mohd Izzed and Jamaludin, Khairil Azwan and Abd Razak, Mohamad Razidi and Alhabshi, Syed Ariff and Yusoh@Harun, Hazizul and Mohd Mohidin, Mohd Zulfarhan
(2001)
Design, manufacture and testing an aircraft model / Mohd Izzed Mustaffa ... [et al.].
(2001)
[Student Project]
(Unpublished)
Mustapha @ Mustafa, Ghazirah and Mohd Ali, Zurriati and Wisnoe, Wirachman
(2009)
Aerodynamics prediction of multi-purpose UAV using wind tunnel experimental approach / Ghazirah Mustapha @ Mustafa, Zurriati Mohd Ali, Wirachman Wisnoe.
(2009)
[Research Reports]
(Unpublished)
N
Nawi, M.R.M. and Azhar, M.S.A. (2018) Aerodynamics Performance of Barn Swallow Bird at Top Speed : A Simulation Study / M.R.M. Nawi and M.S.A. Azhar. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 1-15. ISSN Journal of Mechanical Engineering (JMechE)
Nik Mustapa, Nik Muhammad Muzammil
(2016)
An aerodynamic performance of MAV wings / Nik Muhammad Muzammil Nik Mustapa.
(2016)
[Student Project]
(Unpublished)
R
Rosli, Mohd Safuan (2009) Study of short period behaviour for BWB UAV / Mohd Safuan Rosli. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.
S
Senardi, Mohd Anuar Affendi
(2006)
3D experimental of air flow analysis around Proton Savvy car model / Mohd Anuar Affendi Senardi.
(2006)
Degree thesis, thesis, Universiti Teknologi MARA (UiTM).
Y
Yusof, Fatiha Naziera and Ismail, Mohd Fauzi and Mohamed Noor, Rizal (2023) Unravelling tool edge trajectory patterns: Implications on surface roughness in end milling process / Fatiha Naziera Yusof, Mohd Fauzi Ismail and Rizal Mohamed Noor. (2023) Journal of Mechanical Engineering (JMechE), 12 (1): 5. pp. 81-99. ISSN 1823-5514 ; 2550-164X
Yusoff, H. and Suhaimi, S. and Hyie, K.M. and Iswadi, N. and Farhan, A. (2018) Experimental Investigation of Effects of Wing Camber on Drag for a Bio-Mimic MAV Flapping Wing / H. Yusoff ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 16-28. ISSN 18235514