Items where Subject is "Structural design"

A

Ab Rashid, Afiqah (2022) Propulsion system design of amphibious boat / Afiqah Ab Rashid. [Student Project] (Submitted)

Abd Rahman, Nur Aliaa (2014) Superstructure construction of Adabi’s factory building at Padang Tembak Pengkalan Chepa, Kota Bharu, Kelantan / Nur Aliaa Abd Rahman. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak . (Unpublished)

Abdul Jalil, Muhammad Faris (2014) Spun pile / Muhammad Faris Abdul Jalil. [Student Project] (Unpublished)

Abdul Rashid, Nur Liyana (2014) Construction of pile cap / Nur Liyana Abdul Rashid. [Student Project] (Unpublished)

Abdullah, Mohd Shafiq Dannial (2016) The erection of substation at UMK / Mohd Shafiq Dannial Abdullah. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak .

Abu Bakar, Amsyar Baihaqi (2025) Production development of catamaran sport fishing vessel / Amsyar Baihaqi Abu Bakar. [Student Project] (Unpublished)

Abu Samah, Rosiah (1995) Stress concentration factors on glued joints of timber/ Rosiah Abu Samah. [Student Project] (Unpublished)

Ahmad Nizam, Ahmad Faris (2022) Reinforced concrete building design project and project based learning: case study / Ahmad Faris Ahmad Nizam. [Student Project] (Unpublished)

Ahmad Shah, Najian (2022) Solidworks design and simulation of staircase climbing trolley / Najian Ahmad Shah. [Student Project] (Submitted)

Akmal, Muhammad Al Ikram (2022) Design and fabrication of foldable house stairs / Muhammad Al Ikram Akmal. [Student Project] (Unpublished)

Alinudin, Muhammad Aizuddin (2025) Production devolopment of eco-friendly SWATH / Muhammad Aizuddin Alinudin. [Student Project] (Unpublished)

Alowi, Muhammad Razif (2022) Smart automated lamp grip / Muhammad Razif Alowi. [Student Project] (Unpublished)

Arsad, Dinie Zulhusni (2022) Structural analysis of an outdoor drying rack / Dinie Zulhusni Arsad. [Student Project] (Submitted)

Azahar, Muhammad Hafiz Haikal (2022) Simulation of a flow over a mound-type breakwater of different surface roughness using computational approach / Muhammad Hafiz Haikal Azahar. [Student Project] (Submitted)

Azemi, Nur Amanina (2014) The construction method for super structure / Nur Amanina Azemi. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak . (Unpublished)

Azhar, Ahmad Alif Qayyum (2022) Vibration reduction of mechanical structure using tuned mass damper / Ahmad Alif Qayyum Azhar. [Student Project] (Submitted)

Azmi, Nur Aisyah (2026) An integrated building information modelling-facilities management (BIM-FM) framework for information quality in facilities management in Malaysia: a socio-technical systems approach. PhD Thesis , Universiti Teknologi MARA (UiTM) .

E

Ezani, Nur Iman (2022) Design and fabrication of portable cloth rack / Nur Iman Ezani. [Student Project] (Submitted)

F

Faiza, Muhammad Nufaiel Aiman (2022) Design and fabrication of sliding platform component of Smart Parcel Drop Box (SPD) / Muhammad Nufaiel Aiman Faiza. [Student Project] (Unpublished)

H

Husainee, Muhammad Harith Iqbal (2022) Trash can compactor / Muhammad Harith Iqbal Husainee. [Student Project] (Unpublished)

I

Ibrahim, Azmi (1986) Computer aided design of simply supported, Class 1, prestressed post-tensioned concrete beam with effective bond, in accordance with BS 5400 : 1978 / Azmi Ibrahim. [Student Project] (Unpublished)

Ibrahim, Marzuki (1998) Stress analysis of finger joint subjected to tensile loading / Marzuki Ibrahim. [Student Project] (Unpublished)

J

Jamal, Muhammad Haikal Daniel (2022) Resistance prediction of GRP bedar in calm water using computational fluid dynamic approach / Muhammad Haikal Daniel Jamal. [Student Project] (Unpublished)

Jamaluddin, Arshad (1996) Efficiencies of finger joint of Light Red Meranti (experimental work) / Arshad Jamaluddin. [Student Project] (Unpublished)

Jamaludin, Muhammad Farhan Haikal (2022) Hull design and stability analysis of rigid tube rib / Muhammad Farhan Haikal Jamaludin. [Student Project] (Unpublished)

Johari, Muhammad Harith Iqmal and Zulkarnain, Muhamad Ilman Nafis and Mohd Zamari, Muhammad Alif Syahmi and Husin, Amirul Anwar (2021) Multipurpose table report / Muhammad Harith Iqmal Johari... [et al.]. [Student Project] (Submitted)

Joseph, Ivyana (2018) The influence of diameter to thickness ratio (D/t) to the compressive strength of axially loaded PVC-steel skinned hollow concrete filled columns / Ivyana Joseph. [Student Project] (Unpublished)

K

Kadir, Mohd Hafiz (2007) Analysis of shear wall structure in Pulau Pinang due to wind load and long distance Sumatran earthquake in terms of stiffness of the building / Mohd Hafiz Kadir. [Student Project] (Unpublished)

Kamaruzaman, Filzah Sofiya and Rosli, Ummi Shuhaili and Mohammed Zahary, Siti Umaimah and Mohd Zulkifli, Siti Rohani and Zainal, Mohamad Hafizuddin Hakim (2016) Sapphire Engineering Enterprise : Structural Drafting Centre And Scale Model Marker / Filzah Sofiya Kamaruzaman ...[et al.]. [Entrepreneurship Project] (Unpublished)

M

Maspade, Asri (2006) A study on the behaviour of lift core in highrise / Asri Maspade. [Student Project] (Unpublished)

Masrom, Mohd Asha’ari (2024) Seismic performance of rocking wall-floor plank connection in precast load-bearing structures subjected to lateral cyclic load / Mohd Asha’ari Masrom. PhD Thesis , Universiti Teknologi MARA (UiTM) .

Mat Ropi, Mohd Safiq Aizat (2014) Method statement of groundbeam (temporary formwork) at Maktab Rendah Sains Mara (MRSM) Besut, Terengganu / Mohd Safiq Aizat Mat Ropi. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak .

Mat Saliah, Soffian Noor and Md. Nor, Noorsuhada (2009) Steel and polypropylene fiber as a mechanism in concrete properties improvement / Soffian Noor Mat Saliah, Noorsuhada Md. Nor. [Research Report] (Unpublished)

Mat Sehak, Muhammad Naqib Iqbal (2022) Design and fabrication of vegetables washer / Muhammad Naqib Iqbal Mat Sehak. [Student Project] (Submitted)

Mazuadi, Muhammad Arid Azwar (2022) Welding demontration table with adjuster / Muhammad Arid Azwar Mazuadi. [Student Project] (Submitted)

Mohamad Saidi, Muhammad Syakir and Hasmadi, Muhammad Hisyamuddin Aqil and Adam Arif, Amer Daniel and Yusoff, Muhammad Akmal and Che Wan Rozuwan, Che Wan Muhammad Aizat (2021) CFD analysis / Muhammad Syakir Mohamad Saidi ... [et al.]. [Student Project] (Submitted)

Mohamad Shukri, Rosyimie (2025) Stability and eco-friendly design of SWATH hulls for recreational use / Rosyimie Mohamad Shukri. [Student Project] (Unpublished)

Mohamed Ali, Kaharuddin (1994) Reinforced brick design in accordance to BS 5628 / Kaharuddin Mohamed Ali. [Student Project] (Unpublished)

Mohd Abdillah, Muhammad Hanif (2022) A study of surface roughness effect on a mound type breakwater using CWC - an experiment / Muhammad Hanif Mohd Abdillah. [Student Project] (Submitted)

Mohd Idris, Abdul Raziq Shakirin (2019) Spun pile installation in dry dock at Malaysia Marine and Heavy Engineering Holdings Berhad (West Yard). Industrial Training. Universiti Teknologi MARA, Perak . (Unpublished)

Mohd Nafi, Muhammad Aniq Hilmie (2018) Method statement for substructure / Muhammad Aniq Hilmie Mohd Nafi. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak . (Unpublished)

Mohd Nazrie, Muhammad Nazmi (2022) Propulsion system design of solar boat / Muhammad Nazmi Mohd Nazrie. [Student Project] (Unpublished)

Mohd Razalli, Rabiatul Adawiah (2022) Production design of an amphibious boat / Rabiatul Adawiah Mohd Razalli. [Student Project] (Submitted)

Mohd Rozi, Mohamad Hafiz Aminuddin (2022) Design and fabrication of oil palm fruit collector / Mohamad Hafiz Aminuddin Mohd Rozi. [Student Project] (Submitted)

Mohd Shahrul Munir, Mohamad Faiz (2022) Fabrication of miniature foldable storage rack / Mohamad Faiz Mohd Shahrul Munir. [Student Project] (Unpublished)

Mohd Suhaimi, Mohd Fakhrul Rizal (2016) Installation of structural works at Surau Keda Kg. Che Bima Sg. Jagung, Kedah, Malaysia / Mohd Fakhrul Rizal Mohd Suhaimi. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak .

Mohd Tahir, Kamarudin and Awang Osman, Awang Hattahary (1994) Drop weight test system: design and analysis of drop tower structure / Kamarudin Mohd Tahir and Awang Hattahary Awang Osman. [Student Project] (Unpublished)

Mohd Utama, Izzul Faiz Farhan (2022) Structural design and analysis amphibious boat / Izzul Faiz Farhan Mohd Utama. [Student Project] (Submitted)

Muhammad Rosli, Muhamad Hafizudin and Ariffin, Anas and Roslan, Aiman Asyraaf and Nor Aznan, Muhammad Aqil Akhtar and Jamaludin, Lukman Hakim (2021) Multi level moving storage rack / Muhamad Hafizudin Muhammad ... [et al.]. [Student Project] (Submitted)

Muhd Yusoff, Mohammad Yushaiman Habib and Wan Zakaria, Wan Mohamad Fahmi and Lokman @ Nejib, Muhammad Arash Mifzal and Izaudin, Muhammad Hasif Fitri and Muhammad Hilmi, Ahmad Haiqal Fikri (2021) Payang fiber mould project / Mohammad Yushaiman Habib Muhd Yusoff ... [et al.]. [Student Project] (Submitted)

Muszaide, Aina Marina (2018) Structure strengthening test / Aina Marina Muszaide. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak . (Unpublished)

N

Nazri, Muhammad Khairul Nazmi (2022) Structural design and analysis of solar boat / Muhammad Khairul Nazmi Nazri. [Student Project] (Unpublished)

Nik Min, Nik Najmi (2022) Hull design & stability analysis of solar boat / Nik Najmi Nik Min. [Student Project] (Submitted)

Noor Azhari, Mohamad Noor Asnawi (2022) Hull design & stability analysis of GRP Bedar / Mohamad Noor Asnawi Noor Azhari. [Student Project] (Unpublished)

Noor Heryman, Nur Ain Jannah (2022) Design and fabrication of aluminium can and plastic bottle crusher / Nur Ain Jannah Noor Heryman. [Student Project] (Submitted)

O

Omar, Muhammad Luqman Hakim (2021) Reinforced concrete building design project and project based learning: case study / Muhammad Luqman Hakim Omar. [Student Project] (Unpublished)

Omar, Norizah (1995) Efficiency of glued finger joint / Norizah Omar. [Student Project] (Unpublished)

Openg, Iskanda (1997) Finite element analysis of finger joint / Iskanda Openg. [Student Project] (Unpublished)

R

Rahim, Mohamad Ariff Fikri (2022) Design and fabrication of corn peeler / Mohamad Ariff Fikri Rahim. [Student Project] (Submitted)

Razmi, Nursyafiqah (2018) Detecting and evaluating surface crack defect of building structure and infrastructure elements using Digital Image Processing approach / Nursyafiqah Razmi. [Student Project] (Unpublished)

Roslan, Hakimi and Mohd Sukri, Muhammad Syakir Aiman and Ab. Hadi, Muhammad Firdaus and Wan Norazlan, Wan Alif and Ahmad Fairuz, Ahmad Nur Salam (2021) Hand sanitizer dispenser / Hakimi Roslan ... [et al.]. [Student Project] (Submitted)

Roslan, Muhammad Azri Faiz (2022) Structure design and analysis of GRP Payang boat / Muhammad Azri Faiz Roslan. [Student Project] (Unpublished)

Rosli, Abdul Hadi and Ishak, Muhammad Asyraf and Muhamad Ya Rafi, Muhammad Afif Syafieq and Mohd Shupian, Shamiem Farhan and Ahmad Hakhim, Ahmad Asyraf (2021) Heavy duty hand truck / Abdul Hadi Rosli ... [et al.]. [Student Project] (Submitted)

S

Sayed Safari, Sayed Saqif Iman (2022) Design and fabricate universal hook for car usage / Sayed Saqif Iman Sayed Safari. [Student Project] (Submitted)

Sudin, Muhammad Syaifulnizam (2022) Hull design and stability of amphibious boat / Muhammad Syaifulnizam Sudin. [Student Project] (Unpublished)

Sukat, Mohd Fauzi (2009) Comparative study on traditional and modern long span structure / Mohd Fauzi Sukat. [Student Project] (Unpublished)

Syed Fakhrul Anwar, Sharifah Nur Alieya (2022) Manual spikey roller coconut husk peeler / Sharifah Nur Alieya Syed Fakhrul Anwar. [Student Project] (Submitted)

T

Tajon Aros, Mohammad Fadzli (2007) Reuse of sludge from water treatment plant as a construction material / Mohammad Fadzli Tajon Aros. [Student Project] (Unpublished)

Tajon Aros, Mohammad Fadzli (2007) A study on the response spectral acceleration due to earthquake of 26 December 2004 / Mohammad Fadzli Tajon Aros. [Student Project] (Unpublished)

Tajudin, Muhammad Muizzuddin (2022) Design and fabricate toys box for small toys or Lego / Muhammad Muizzuddin Tajudin. [Student Project] (Unpublished)

Tengku Sulaiman, Tengku Ammer (2022) Design and fabrication of lamp stationery rack / Tengku Ammer Aizad Tengku Sulaiman. [Student Project] (Submitted)

W

Wan Azman, Wan Ahmad Syamil Asyraf (2022) Design and fabrication of gout patient movable device / Wan Ahmad Syamil Asyraf Wan Azman. [Student Project] (Submitted)

Wan Mohd Zulkifli, Wan Muhammad Irham Idzney and Ab Rahim, Muhmmad Farith Amer and Shahiran, Muhamad Irfan Izzuddin and Shaffei, Shahrul Munir Al-Hafiz (2021) Agriculture / Wan Muhammad Irham Idzney Wan Mohd Zulkifli ... [et al.]. [Student Project] (Submitted)

Wan Rozain, Wan Muhammad Jazli Na'im (2022) Design and fabrication of minimalzie wall table with storage / Wan Muhammad Jazli Na'im Wan Rozain. [Student Project] (Submitted)

Wan Shamsuddin, Wan Muhammad Azam Idrus (2022) Development of hydroponic farming system / Wan Muhammad Azam Idrus Wan Shamsuddin. [Student Project] (Submitted)

Wan Suhaime, Wan Muhamad Afiq Firdaus (2022) Design and fabrication of main box and shutter door of Smart Parcel Dropbox (SPD) / Wan Muhamad Afiq Firdaus Wan Suhaime. [Student Project] (Submitted)

Wan Zullkefli, Wan Lutfi (2022) Hull design and stability of GRP payang boat / Wan Lutfi Wan Zullkefli. [Student Project] (Submitted)

Wira, Muhammad Irfan Hakimi (2016) Building condition assessment : PWD Quarters Jalan Bruseh / Muhammad Irfan Hakimi Wira. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak . (Unpublished)

Woo, Yian Peen and Senin, Syahrul Fithry (2012) Effects of perforations on load carrying mechanism of perforated hollow sections inspired by nature / Woo Yian Peen and Syahrul Fithry Senin. [Research Report] (Unpublished)

Y

Yusof, Muhammad Alif Rahimi (2024) Production design development of passenger boat to the Island / Muhammad Alif Rahimi Yusof. [Student Project] (Unpublished)

Z

Zakaria, Muhammad Amirul (2022) Production design rigid tube rib / Muhammad Amirul Zakaria. [Student Project] (Unpublished)

Zulkffli, Harith Asyran (2022) Simulation of a flow over a underwater pillar of different surface roughness using computational approach / Harith Asyran Zulkffli. [Student Project] (Submitted)