Items where Subject is "Electronic data processing. Computer-aided engineering"

Group by: Creators | Item Type
Number of items at this level: 36.


Flood damage cost prediction using random forest / Ainul Najwa Azahari and Norlina Mohd Sabri. (2024) ESTEEM Academic Journal, 20. ISSN 2289-4934

IoT-based smart wheelchair system for physically impaired person / Muhammad Afiq Mohd Aizam... [et al.]. (2020) ESTEEM Academic Journal, 16. pp. 59-73. ISSN 2289-4934 (Submitted)


As-built inspection for concrete tank using non-contact three dimensional data acquisition / Nurul Huda Abd Rahman. (2019) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Satellite link budget analysis using MATLAB / Mohd Al-Afiq Albakri. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

The capability of [multi-rotor DJI phantom 3] advanced for detecting crack on concrete wall different distance / Ain Uzzairah Amran. (2018) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

A fuzzy MADM (Multiple Attribute Decision Making) expert system for job matching / Refnaldy Azuardi. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

Developing framework for natphoric computer-aided web-based kansei engineering / Mohammad Bakri Che Haron. (2013) Masters thesis, thesis, Universiti Teknologi MARA.

Development of a novel failure prediction tool (CHyCLOP) using analytical method for hybrid composite laminates based on combined lamination and failure theories / Mohamad Mali. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Human skull 3D model development and biomechanical analysis in full frontal crash / Shahrul Hisyam Marwan. (2014) Masters thesis, thesis, Universiti Teknologi MARA.

CFD modelling of blood flow in portal vein hypertension with and without thrombosis for non-newtonian / Mohd Adib Mohammed Taha. (2010) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Performance analysis of BPSK and QPSK using error correcting code through AWGN / Mohd Hayyul Dltizam Othman. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Performance of handover procedure for enhanced relay LTE networks / Saliza Ramli. (2013) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Student Project

Improvement of reinforced concrete design based on BS8110:1997 using computer aided software / Norhayati Ag. Mohamad. (2005) [Student Project] (Unpublished)

Cost benefit analysis of lighting retrofit of led bulb at Bangunan Ilmuan UiTM Campus Bukit Besi / Muhammad Badrul Amin Amran. (2022) [Student Project] (Unpublished)

Structural analysis of an outdoor drying rack / Dinie Zulhusni Arsad. (2022) [Student Project] (Submitted)

Vibration reduction of mechanical structure using tuned mass damper / Ahmad Alif Qayyum Azhar. (2022) [Student Project] (Submitted)

Design and fabrication of portable cloth rack / Nur Iman Ezani. (2022) [Student Project] (Submitted)

Study of hardness on the stainless steel in various cooling medium / Muhammad Fikri Harun Anuar. (2022) [Student Project] (Unpublished)

The effect of the lattice girder on the composite action of the half slab / Mohd Zalimi Ja’afar. (2000) [Student Project] (Unpublished)

Grip cup holder project / Muhammad Naufal Asyraf Mat Nasir. (2022) [Student Project] (Unpublished)

Generation of G-Code on aluminum blocks using vertical CNC machine / Nur Adriana Auni Mohd Andrie. (2022) [Student Project] (Submitted)

Effect of microstructure on stainless steel due to variable temperature using plasma cutting / Muhammad Danial Hakim Mohd Faisal. (2022) [Student Project] (Unpublished)

A numerical study on structural behaviour of bonded and unbonded prestressed beams / Hardiyana Mohd Samsi. (2007) [Student Project] (Unpublished)

A computational simulation of foreshore wave at rocky coast landform near Terengganu coastline during monsoon season / Muhammad Luqman Hakim Mohd Shaiful Afzam. (2022) [Student Project] (Unpublished)

Structural design and analysis amphibious boat / Izzul Faiz Farhan Mohd Utama. (2022) [Student Project] (Submitted)

PC based data logger / Mohd Hidzham Mohd Yusof. (2008) [Student Project] (Unpublished)

Hull design & stability analysis of GRP Bedar / Mohamad Noor Asnawi Noor Azhari. (2022) [Student Project] (Unpublished)

Miniature drilling machine prototype / Muhammad Zakiruddin Osman @ Mohd Nordin. (2022) [Student Project] (Submitted)

Assesment on X - bracing system and V - bracing system of steel building / Nurul Iwani Roslan. (2007) [Student Project] (Unpublished)

CAD, CAE and CAM of solid disc brake, and the foundry process / Mohamad Izam Sahab and Jamal Nahar Musa. (2004) [Student Project] (Unpublished)

Designing a front car by using Bezier Curves and Lagrange Interpolation in Computer-Aided Geometric Design (CAGD) / Hamizah Sahbudin @ Sahabudin, Nurul Afiqah Mohd Yunus and Syaza Aida Mohd Nasir. (2018) [Student Project] (Unpublished)

Development of computer aided design of rectangular reinforced concrete column by using Visual Basic 6.0 / Mohd Akmal Salleh. (2007) [Student Project] (Unpublished)

Flood inundation mapping using HEC-RAS and ArcView GIS / Noorhaliza Hany Samat. (2005) [Student Project] (Unpublished)

Computer approach using MathCAD for better understanding to the Structural Analysis II (KJC 424) / Wan Muhamad Fahmi Wan Zaki. (2006) [Student Project] (Unpublished)

Modeling of structural deformation of Staff’s Quarters Sekolah Menengah Kebangsaan Ranau subjected to the 2015 Ranau earthquake using Ruaumoko 2D / Muhammad Shamin Zulhaimi. (2018) [Student Project] (Unpublished)

Research Reports

Modelling of a level drum process control training system / Belinda Chong Chiew Meng, Normasni Md Fauzi and Iza Sazanita Isa. (2010) [Research Reports] (Unpublished)

This list was generated on Wed Jun 12 14:03:26 2024 UTC.