Items where Subject is "Mechanical drawing. Engineering graphics"

[up]

Library of Congress Subject Areas (175)
- T Technology (46)
  - T Technology (General) (27)
    - Mechanical drawing. Engineering graphics (42)

Group by: Creators | Item Type

Jump to: Article | Book Section | Monograph | Conference or Workshop Item | Thesis | Student Project | Research Reports

Number of items at this level: 42.

Article

The construction of cubic Bezier curve / Siti Sarah Raseli, Nur Ain Mohd Khusairy Faisal and Norpah Mahat. (2022) Journal of Computing Research and Innovation (JCRINN), 7 (2): 12. pp. 111-120. ISSN 2600-8793

Pemanfaatan teknologi cetak 3 dimensi sebagai upaya pelestarian gerabah bentanga / Taufik Panji Wisesa. (2020) Idealogy Journal, 5 (1). pp. 179-195. ISSN 2550-214X

Towards a comprehensive understanding of design sketch - a literature review of design sketch taxonomy and considerations for future research / Min Hua ... [et. al]. (2018) Idealogy Journal, 3 (3). pp. 261-277. ISSN 2550-214X

Configuration of framework for utilising sharp waste bins in highway R&R / Mohamad Amir Razi Abdullah, Haszlin Shaharudin and Mohammad Azroll Ahmad. (2020) International Journal of INTI, 24 (SI): 9. pp. 57-62. ISSN 0126-5822

Book Section

Assessment of threedimensional model generated using digital close-range photogrammetric method for heritage documentation applications / Ismail Ma’arof. (2017) In: The Doctoral Research Abstracts. IGS Biannual Publication, 12 (12). Institute of Graduate Studies, Shah Alam, p. 8.

Monograph

Development of a cost efficient vision system for defects detection / Muhammad Zarif Kamarudin. (2010) Other. UNSPECIFIED. (Unpublished)

Conference or Workshop Item

Design of a backpack dry leaves vacuum / Mohd Hazwan Mohamed Norli, Mohd Sapuwan Abu Bakar and Amirah Adam. (2020) In: 9th International Innovation, Invention and Design Competition 2020 INDES 2020.

Analisis rekabentuk radas ujian hakisan peronggaan / Abdul Talib Bon and Othman Yacoob. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Green sustainable “lemang” toaster machine / Bakri Ali, Aminuddin Hamid and Nurrafiqah Sabree. (2021) In: Virtual Go-Green: Conference and Publication (V-Go Green 2020), 29-30 September 2020, Universiti Teknologi MARA, Cawangan Perak Kampus Seri Iskandar.

Development of cost efficient vision system for defects detection / Muhammad Zarif Kamarudin. (2010) In: UNSPECIFIED. (Unpublished)

Thesis

Development of a computer-aided RF design package / Farrah Qursyiah Abbas. (2007) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Design and simulation 2.4GHz coupled patch microstrip antenna / Noor Azanee Muhamad Alias. (2007) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Design of a preamplifier / Zawifatulaziah Suhaimi. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Hexagonal planar antenna with rectangular shaped slot / Intan Nurdahlia Mohd Radzi. (2012) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Digital copy is available in CD Physical copy is available on shelf

Butterworth low-pass filter design / Ismahalili Ishak. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

A computer simulation prototype of simplified cognitive architecture model / Sham Shul Shukri Mat. (2012) Masters thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Design and development of an observatory dome and shutters structure / Mohd Aliff Wan Chek. (2009) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Satu kajian tentang persepsi pelajar perempuan program Seni Reka Grafik di FSSR UiTM mengenai matlamat dan masa depan mereka dalam industri seni reka grafik. Skop kajian : UiTM Kampus Alor Gajah / Samsiah Awang. (2000) Degree thesis, thesis, Universiti Teknologi MARA.

Design for assembly (DFA) on sandwich toaster / Nazatol Shima Ahmad Radzuki. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Study on rehabilitation equipment using CATIA software: standing frame / Mohd Aminul Hilmi Mohamad Hassan. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Investigation on the effect of physical parameters of terahertz dipole photoconductive antenna to their performance / Ahmad Syazwan Mahadan. (2014) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Digital copy is available in CD Physical copy is available on shelf

Design of frequency reconfigurable 2 by 8 linear array antenna structure / Rodiah Mahmud. (2013) Masters thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

The digital altimeter / Sariana Safian. (2006) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Design a reconfigurable U-slot rectangular microstrip patch antenna for a multiband applications / Mohamad Asri Shafie. (2014) Masters thesis, thesis, Universiti Teknologi MARA (UiTM). Digital copy is available in CD Physical copy is available on shelf

Design of a compact pyramidal horn antenna / Norhafizi Long. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Student Project

Educational tensile tester / Syed Khomeini Syed Hassan, Abd. Manan Abd. Rahman and Mohd Firdaus Abu Bakar. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Design and development of catapult based ping pong ball launcher / Ammar Imran Shamsuddin. (2022) [Student Project] (Submitted)

Comparative study of drag and lift force for different shapes of submarines / Muhammad ‘Ammar Aiman Mohd Alif. (2022) [Student Project] (Unpublished)

Development of hydroponic farming system / Wan Muhammad Azam Idrus Wan Shamsuddin. (2022) [Student Project] (Submitted)

Rubber tube as an elastic spring in soap dispenser mechanism / Zex Ali and Nor Mala Kamsin. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Study on car body frame manufacturing / Khamis Rezan Mahat, Ahmad Shuhaimi Jalaludin and Mohd Irwan Ali. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Modification of sate grill / Kamal Nioh, Henry Malang Jok and Adeleen Jacqueline Philip. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Single and multiple plane balancing / Ahmad Fadzli Mohamed Yusoff and Faizul Mohamed Zaki. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Design, manufacture and testing an aircraft model / Mohd Izzed Mustaffa ... [et al.]. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Merekabentuk alat mikromanometer / Nor Azamin Abu Hasan and Harmadi Si Baweh. (1992) [Student Project] Physical copy is available on shelf (Unpublished)

Mesin pembancuh simen mini / Mahyudean Oon, Mohd Nazir Yusof and Siti Fatimah Abait. (1999) [Student Project] Physical copy is available on shelf (Unpublished)

Rekabentuk mekanisme '4-bar linkage' / Mohd Shahir Azali and Nor Hafizan Ramli. [Student Project] Physical copy is available on shelf (Unpublished)

Prodstar - an application of MRP II software to production planning and control / Muzafar Ahamad,Mamat Tarmizi Abdul Ghani and Musa Mohd Ehsan. (1996) [Student Project] (Unpublished)

Kerusi boleh lipat untuk kanak – kanak kecil / Nikmat Mohamad. (1986) [Student Project] (Unpublished)

Mengkaji kesan-kesan dinamik akibat mengurangkan (mengecilkan) semua dimensi "slider crank mechanism' / Anuar Abdullah dan Zolkapli Mahbob. (1990) [Student Project] Physical copy is available on shelf (Unpublished)

Mesin memerah kelapa / Mohd Emran Mohd Sharif, Clement Joseph and Kamarul Azhar Saadan. [Student Project] Physical copy is available on shelf (Unpublished)

Research Reports

Rational cubic Bezier curve and it’s application in designing Jawi writing / Siti Asmah Mohamed, Rafizah Kechil and Shakirah Mohd Abd. Rahman. (2011) [Research Reports] Physical copy is available on shelf (Unpublished)

This list was generated on Sat Dec 21 23:22:13 2024 UTC.