Items where Subject is "Mechanical drawing. Engineering graphics"

A

Abbas, Farrah Qursyiah (2007) Development of a computer-aided RF design package / Farrah Qursyiah Abbas. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Abdullah, Anuar and Mahbob, Zolkapli (1990) Mengkaji kesan-kesan dinamik akibat mengurangkan (mengecilkan) semua dimensi "slider crank mechanism' / Anuar Abdullah dan Zolkapli Mahbob. [Student Project] (Unpublished)

Abdullah, Mohamad Amir Razi and Shaharudin, Haszlin and Ahmad, Mohammad Azroll (2020) Configuration of framework for utilising sharp waste bins in highway R&R / Mohamad Amir Razi Abdullah, Haszlin Shaharudin and Mohammad Azroll Ahmad. International Journal of INTI , 24 (SI) : 9 . pp. 57-62. ISSN 0126-5822.

Abu Hasan, Nor Azamin and Si Baweh, Harmadi (1992) Merekabentuk alat mikromanometer / Nor Azamin Abu Hasan and Harmadi Si Baweh. [Student Project] (Unpublished)

Adzmi, Mohd Hafnidzam (2024) The levels of creative design processes with computer graphic tools / Mohd Hafnidzam Adzmi. Journal of Creative Arts , 1 (2) : 6 . pp. 62-73. ISSN e-ISSN: 3030-6086.

Ahamad, Muzafar and Abdul Ghani, Mamat Tarmizi and Mohd Ehsan, Musa (1996) Prodstar - an application of MRP II software to production planning and control / Muzafar Ahamad,Mamat Tarmizi Abdul Ghani and Musa Mohd Ehsan. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Ahmad Radzuki, Nazatol Shima (2010) Design for assembly (DFA) on sandwich toaster / Nazatol Shima Ahmad Radzuki. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Ali, Bakri and Hamid, Aminuddin and Sabree, Nurrafiqah (2021) Green sustainable “lemang” toaster machine / Bakri Ali, Aminuddin Hamid and Nurrafiqah Sabree. In: Virtual Go-Green: Conference and Publication (V-Go Green 2020) , 29-30 September 2020 , Universiti Teknologi MARA, Cawangan Perak Kampus Seri Iskandar .

Ali, Norarifah and Ahmad Zamri, Ahmad Fazlan (2019) Bengkel asas lukisan pembinaan 3 dimensi : perisian AutoCAD. Bulletin. Universiti Teknologi MARA, Kedah , Universiti Teknologi MARA, Kedah .

Ali, Zex and Kamsin, Nor Mala (2002) Rubber tube as an elastic spring in soap dispenser mechanism / Zex Ali and Nor Mala Kamsin. [Student Project] (Unpublished)

Ariffin, Mohd Arzaimiruddin and Yazid, Ahmad Firdaus and Mohd Mazelan, Muhammad Faiz (2024) Development of an automated technical drawing plotter for enhanced engineering education / Mohd Arzaimiruddin Ariffin, Ahmad Firdaus Yazid and Muhammad Faiz Mohd Mazelan. In: International Undergraduates Get Together 2024 (IUGeT 2024) , November , Universiti Teknologi MARA, Perak .

Awang, Samsiah (2000) Satu kajian tentang persepsi pelajar perempuan program Seni Reka Grafik di FSSR UiTM mengenai matlamat dan masa depan mereka dalam industri seni reka grafik. Skop kajian : UiTM Kampus Alor Gajah / Samsiah Awang. Degree Thesis , Universiti Teknologi MARA .

Azali, Mohd Shahir and Ramli, Nor Hafizan Rekabentuk mekanisme '4-bar linkage' / Mohd Shahir Azali and Nor Hafizan Ramli. [Student Project] (Unpublished)

B

Bon, Abdul Talib and Yacoob, Othman (2002) Analisis rekabentuk radas ujian hakisan peronggaan / Abdul Talib Bon and Othman Yacoob. In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara” , 27 dan 28 Mei 2002 , Hotel Vistana, Kuantan, Pahang .

C

Che din, Sharkawi and Abdul Wahab, Nurulakma and Abu Sujak, Farhanah (2025) Review of the exploring spatial visualisation and gender among 3d computer animation undergraduates. pp. 22-25.

H

Hua, Min and Han, Ji and Wang, Pan and Huang, Shan (2018) Towards a comprehensive understanding of design sketch - a literature review of design sketch taxonomy and considerations for future research / Min Hua ... [et. al]. Idealogy Journal , 3 (3) . pp. 261-277. ISSN 2550-214X.

I

Ishak, Ismahalili (2009) Butterworth low-pass filter design / Ismahalili Ishak. Degree Thesis , Universiti Teknologi MARA (UiTM) .

K

Kamarudin, Muhammad Zarif (2010) Development of a cost efficient vision system for defects detection / Muhammad Zarif Kamarudin. Other. (Unpublished)

Kamarudin, Muhammad Zarif (2010) Development of cost efficient vision system for defects detection / Muhammad Zarif Kamarudin. In: . (Unpublished)

L

Long, Norhafizi (2004) Design of a compact pyramidal horn antenna / Norhafizi Long. Degree Thesis , Universiti Teknologi MARA (UiTM) .

M

Ma'arof, Ismail (2017) Assessment of threedimensional model generated using digital close-range photogrammetric method for heritage documentation applications / Ismail Ma’arof. In: The Doctoral Research Abstracts.. IGS Biannual Publication , 12 (12) . Institute of Graduate Studies , Shah Alam , p. 8 .

Mahadan, Ahmad Syazwan (2014) Investigation on the effect of physical parameters of terahertz dipole photoconductive antenna to their performance / Ahmad Syazwan Mahadan. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Mahat, Khamis Rezan and Jalaludin, Ahmad Shuhaimi and Ali, Mohd Irwan (2001) Study on car body frame manufacturing / Khamis Rezan Mahat, Ahmad Shuhaimi Jalaludin and Mohd Irwan Ali. [Student Project] (Unpublished)

Mahmud, Rodiah (2013) Design of frequency reconfigurable 2 by 8 linear array antenna structure / Rodiah Mahmud. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Mohamad, Nikmat (1986) Kerusi boleh lipat untuk kanak – kanak kecil / Nikmat Mohamad. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Mohamad Hassan, Mohd Aminul Hilmi (2009) Study on rehabilitation equipment using CATIA software: standing frame / Mohd Aminul Hilmi Mohamad Hassan. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Mohamed, Siti Asmah and Kechil, Rafizah and Mohd Abd. Rahman, Shakirah (2011) Rational cubic Bezier curve and it’s application in designing Jawi writing / Siti Asmah Mohamed, Rafizah Kechil and Shakirah Mohd Abd. Rahman. [Research Report] (Unpublished)

Mohamed Norli, Mohd Hazwan and Abu Bakar, Mohd Sapuwan and Adam, Amirah (2020) Design of a backpack dry leaves vacuum / Mohd Hazwan Mohamed Norli, Mohd Sapuwan Abu Bakar and Amirah Adam. In: 9th International Innovation, Invention and Design Competition 2020 INDES 2020 .

Mohamed Yusoff, Ahmad Fadzli and Mohamed Zaki, Faizul (2002) Single and multiple plane balancing / Ahmad Fadzli Mohamed Yusoff and Faizul Mohamed Zaki. [Student Project] (Unpublished)

Mohammed Al-Maqtari, Zakarya Ameen (2010) Development of virtual pH analyzer. [Student Project] (Unpublished)

Mohammed Almaqtari, Zakarya Ameen and Janin, Zuriati (2010) Development of virtual pH analyzer: article. pp. 1-7.

Mohd Alif, Muhammad ‘Ammar Aiman (2022) Comparative study of drag and lift force for different shapes of submarines / Muhammad ‘Ammar Aiman Mohd Alif. [Student Project] (Unpublished)

Mohd Radzi, Intan Nurdahlia (2012) Hexagonal planar antenna with rectangular shaped slot / Intan Nurdahlia Mohd Radzi. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Mohd Sharif, Mohd Emran and Joseph, Clement and Saadan, Kamarul Azhar Mesin memerah kelapa / Mohd Emran Mohd Sharif, Clement Joseph and Kamarul Azhar Saadan. [Student Project] (Unpublished)

Muhamad Alias, Noor Azanee (2007) Design and simulation 2.4GHz coupled patch microstrip antenna / Noor Azanee Muhamad Alias. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Mustaffa, Mohd Izzed and Jamaludin, Khairil Azwan and Abd Razak, Mohamad Razidi and Alhabshi, Syed Ariff and Yusoh@Harun, Hazizul and Mohd Mohidin, Mohd Zulfarhan (2001) Design, manufacture and testing an aircraft model / Mohd Izzed Mustaffa ... [et al.]. [Student Project] (Unpublished)

N

Nioh, Kamal and Malang Jok, Henry and Philip, Adeleen Jacqueline (2001) Modification of sate grill / Kamal Nioh, Henry Malang Jok and Adeleen Jacqueline Philip. [Student Project] (Unpublished)

O

Oon, Mahyudean and Yusof, Mohd Nazir and Abait, Siti Fatimah (1999) Mesin pembancuh simen mini / Mahyudean Oon, Mohd Nazir Yusof and Siti Fatimah Abait. [Student Project] (Unpublished)

R

Raseli, Siti Sarah and Mohd Khusairy Faisal, Nur Ain and Mahat, Norpah (2022) The construction of cubic Bezier curve / Siti Sarah Raseli, Nur Ain Mohd Khusairy Faisal and Norpah Mahat. Journal of Computing Research and Innovation (JCRINN) , 7 (2) : 12 . pp. 111-120. ISSN 2600-8793.

Rohimee, Nurruldin Akhbar (2014) Quadcopter design simulation using solidworks software. Degree Thesis , Universiti Teknologi MARA (UiTM) .

S

Saad, Sazriana (2024) Improvising fogging machine design key characteristic through fundamental performances. In: Melaka International Intellectual Exposition 2024 (MiiEX 2024).. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka , Alor Gajah , pp. 741-746 . ISBN 978-967-2846-81-9.

Safian, Sariana (2006) The digital altimeter / Sariana Safian. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Shafie, Mohamad Asri (2014) Design a reconfigurable U-slot rectangular microstrip patch antenna for a multiband applications / Mohamad Asri Shafie. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Shahrom, Melissa and Zulfakar, Mohd Hafiz and Abd Rashid, Norasekin (2024) Flexsilk: cetak baju di mana-mana sahaja. Paradigma Johor: Malaysian Academy of SME and Entrepreneurship Development , 12 . pp. 1-6. ISSN 2682-7824.

Shamsuddin, Ammar Imran (2022) Design and development of catapult based ping pong ball launcher / Ammar Imran Shamsuddin. [Student Project] (Submitted)

Sharma, Keshwar and Adnan, Nursyahirah and Rashidi, Nur Syazana and Mohd Idris, Nasif (2025) Air-driven conveyor system for frictionless material movement. In: Negeri Sembilan International Exposition (NSIEx) & Research Symposium 2025: e-Book of Extended Abstract.. Universiti Teknologi MARA, Negeri Sembilan , pp. 95-98 . ISBN 9786299595373.

Shukri Mat, Sham Shul (2012) A computer simulation prototype of simplified cognitive architecture model / Sham Shul Shukri Mat. Masters Thesis , Universiti Teknologi MARA .

Suhaimi, Zawifatulaziah (2009) Design of a preamplifier / Zawifatulaziah Suhaimi. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Syed Hassan, Syed Khomeini and Abd. Rahman, Abd. Manan and Abu Bakar, Mohd Firdaus (2001) Educational tensile tester / Syed Khomeini Syed Hassan, Abd. Manan Abd. Rahman and Mohd Firdaus Abu Bakar. [Student Project] (Unpublished)

T

Taufik Panji, Wisesa (2020) Pemanfaatan teknologi cetak 3 dimensi sebagai upaya pelestarian gerabah bentanga / Taufik Panji Wisesa. Idealogy Journal , 5 (1) . pp. 179-195. ISSN 2550-214X.

W

Wan Chek, Mohd Aliff (2009) Design and development of an observatory dome and shutters structure / Mohd Aliff Wan Chek. Degree Thesis , Universiti Teknologi MARA .

Wan Shamsuddin, Wan Muhammad Azam Idrus (2022) Development of hydroponic farming system / Wan Muhammad Azam Idrus Wan Shamsuddin. [Student Project] (Submitted)