Items where Subject is "Electrochemistry. Electrolysis"

Article

Optimizing sintering process to produce highest density of porous Ti-6Al-4V / Nor Hafiez Mohamad Nor ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 44-55. ISSN 18235514

Investigation on the effect of current density on porous GaN fabricated by UV-assisted electrochemical etching / Nurul Syuhadah Mohd Razali …[et al.]. (2021) Journal of Electrical and Electronic Systems Research (JEESR), 18. pp. 84-88. ISSN 1985-5389

Properties and application of electrochemically anodized Ta2O5 nanostructures: a review / Nur Lili Suraya Ngadiman ... [et al.]. (2022) Journal of Mechanical Engineering (JMechE), 11 (1): 1. pp. 1-48. ISSN 1823-5514 ; 2550-164X

A preliminary investigation of polyaniline /chitosan composite’s physicochemical properties and potential electrochemical application / Nur Farahin Suhaimi ... [et al.]. (2022) Journal of Academia, 10. pp. 175-186. ISSN 2289-6368

Soybean and glycine as potential corrosion inhibitors for steel in hydrochloric acid: electrochemical and morphological studies / Solhan Yahya ... [et al.]. (2024) Scientific Research Journal, 21 (1): 3. pp. 43-65. ISSN 1675-7009

Book Section

Copper deposited titania nanotubes: versatile photoelectrodes for photoelectrochemical solar cell applications / Lim Ying Chin … [et al.]. (2017) In: Melaka International Intellectual Exposition (MIIEX 2007). Division of Research and Industry Linkages, Alor Gajah, Melaka.

Conference or Workshop Item

Exploring the parameter for alternating current electrophoretic deposition of carbon nanotubes-polyaniline: a review / Affycilla Adries and Intan Syaffinazzilla Zaine. (2020) In: UNSPECIFIED.

Exploring the parameter for alternating current electrophoretic deposition of carbon nanotubesconducting polymer : a review / Ahmad Fahmi, Intan Syaffinazzilla Zaine and Dr. Norain Isa. (2020) In: UNSPECIFIED.

Exploring the parameter for alternating current electrophoretic deposition of carbon nanotubes-polypyrrole : a review / Annestasia Ollat Jampang, Intan Syaffinazzilla Zaine and Dr. Noirain Isa. (2020) In: UNSPECIFIED.

Electrochemical properties of Electric Arc Furnace Slag for degradation of Acid Orange II / Iman Athirah Khamis and Dr. Norhaslinda Nasuha. (2020) In: UNSPECIFIED.

Electrode reversibility of Electric Arc Furnace Slag for degradation of acid orange II / Nur Zulaikha Zainudin and Dr. Norhaslinda Nasuha. (2020) In: UNSPECIFIED.

Thesis

Computational modelling of mass transport and dynamic simulation of a high pressure polymer electrolyte membrane electrolyser / Abdul Hadi Abdol Rahim @ Ibrahim. (2017) PhD thesis, thesis, Universiti Teknologi MARA.

Effect of lithium triflate (LiTf) salt on polysaccharide based natural solid polymer electrolyte / Nur Jannah Abdul Halim. (2023) UNSPECIFIED thesis, thesis, Universiti Teknologi MARA, Perlis.

The electrical properties of zinc oxide-graphene thin film in phase change memory / Nabilah Abdul Wahid. (2017) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mechanical and conductive properties of silicone filled graphene electrically conductive adhesive [ECA] / Nurin Aishah Ahmad Omar. (2022) Degree thesis, thesis, Universiti Teknologi MARA, Perlis.

Removal of Cu (II) and Mg (II) by using modified mesoporous silicates MCM-41 and SBA-15 from aqueous solution / Faustina Elfrida Anak Sangok. (2014) Masters thesis, thesis, Universiti Teknologi MARA.

Integration of polyvinyl alcohol (PVA) thin film with zinc-cyclen casted over polyethersulfone (PES) support membrane for carbon dioxide separation performance / Nursyuhani Che Husain. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Optimization study of electrocoagulation process on nozi batik wastewater / Nurul Nabilla Nadia Hashim. (2022) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Electrical, mechanical and adhesion properties of silicone electrical conductive adhesives [ECAs] filled carbon black at elevated temperature / Nurul Hazirah Hasnol. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Influence of a-site substitution on structural, electrical resistivity and magnetic properties in La-based manganite system : a review / Nurul Natasha Mohammad Khairani. (2022) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Electrochemical performance of layered Lico0.9X0.1O2 (X = Cr, Mn, Fe, Ni) cathode materials for lithium-ion batteries / Nor Syamilah Syamimi Mohd Abdillih. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

Mechanical and conductive properties of silicone filled graphene treated with silane coupling agent electrically conductive adhesive [ECAs] / Rabi’atul 'Adawiyah Mohd Yatim. (2020) Degree thesis, thesis, Universiti Teknologi MARA, Perlis.

Chemical activation of bamboo activated carbon (BAC) based on microwave-ultrasonic activation for supercapacitor application / Norakmalah Mohd Zawawi. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Preparation and characterization of polymer electrolytes methyl cellulose based potassium hydroxide for electrochemical cell / Mas Fiza Mustafa. (2015) Masters thesis, thesis, Universiti Teknologi MARA.

Physicochemical and electrochemical properties of mesoporous silica carbon electrode / Noramira Saad. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Student Project

Aniline-assisted synthesis towards a renewable rice husk silica-derived Ni-phyllosilicate / Dayang Nurul Asyiqin Abang Junaidi. (2023) [Student Project] (Submitted)

Structural characterization of silver nanowires (AgNWs) polymeric film for flexible wearable antenna / Nurul Haffiza Abd Halim. (2017) [Student Project]

Synthesis, characterisation and anti-corrosion screening of co(ii) n-butylmethyl and co(ii) n-ethylbenzyl dithiocarbamate / Muhammad Faiz Abd Latif. (2017) [Student Project] (Unpublished)

Enhanced conductivity of epoxy-filled carbon black conductive ink via green co-solvent technique on pet substrate / Nur Aisyah Amirah Abdul Razak. (2023) [Student Project] (Submitted)

Preparation of PVdF-HFP based polymer gel electrolyte for zinc batteries / Nurul Athirah Ahmad Ezani. (2009) [Student Project] (Unpublished)

Review of structural and electrical properties in substituted charge ordered monovalent and divalent-doped manganites / Nur Anis Natasha Ahmad Rofie. (2022) [Student Project] (Submitted)

Alkaline polymer batteries: electrolytes preparation and battery characterization / Nurul Hazwani Aminuddin Rosli. (2009) [Student Project] (Unpublished)

Supercapacitive performance of reduce graphene oxide/nickel/titanium dioxide ternary nanocomposite / Nurafrina Azman. (2020) [Student Project] (Unpublished)

Development of freundlich based model for fluoride removal via electrocoagulation process using aluminium electrodes / Muhammad Izham Hashim. (2017) [Student Project]

Fabrication and characterization of zinc oxide (ZnO) thin films on glass substrate by radio frequency (RF) sputtering technique / Siti Amira Norafarih An Ismoni. (2017) [Student Project]

Effect of polypyrrole on electrochemical properties of MWCNTs films prepared by DC-EPD technique / Nur Amira Jaaffar. (2017) [Student Project] (Unpublished)

Structural and optical properties of graphene oxide / zinc oxide nanorods thin films prepared by aqueous solution immersion method / Muhamad Abdul Qayyum Mohd Sazali. (2018) [Student Project] (Unpublished)

Electrochemical properties of MWCNTs-polypyrrole nanocomposite films prepared by AC-EPD technique / Siti Norazlin Nordin. (2017) [Student Project]

Characterization and conductive properties of epoxy filled-graphene conductive ink via green co-solvent method / Aliah Nuruljannah Ruslan. (2023) [Student Project] (Submitted)

Modelling and optimization of citronellyl laurate esterification in batch reactor / Mohammad Shahril Sairi. (2017) [Student Project] (Unpublished)

Effect of plasticizer on PMMA grafted natural rubber polymer electrolyte / Siti Nakhirah Sharip Huddin. (2013) [Student Project] (Unpublished)

Effect of potassium iodide (KI) salt addition on polysaccharide based natural solid polymer electrolyte / Nurul Syamimi Sohaimi. (2023) [Student Project] (Submitted)

Quantitative analysis of essential metals in Ceylon Cinnamon and Cassia Cinnamon by using Flame Atomic Absorption Spectrometry (FAAS) / Wan Nor Azuin Wan Hassan. (2018) [Student Project] (Unpublished)

Removal of microplastics via electrocoagulation process using titanium dioxide electrode / Nur Ayuni Zamri. (2022) [Student Project] (Unpublished)

Research Reports

The optimization study of electrocoagulation process on slaughtherhouse wastewater / Muhammad Aqeef Nuqman Azizan. (2022) [Research Reports] (Submitted)

Structural, electrical and thermal studies of polyethylene based solid polymer electrolytes / Ri Hanum Yahaya Subban … [et al.]. (2011) [Research Reports] (Unpublished)

Effect of continuously flow electrocoagulation on total suspended solid level in Arau river / Amirul Mukminin Zaidi. (2022) [Research Reports] (Submitted)