Items where Division is "Faculty of Mechanical Engineering" and Year is 2001

[up]

Group by: Creators | Item Type | No Grouping

Jump to: Thesis | Student Project

Number of items: 68.

Thesis

Ahmad, Zahari (2001) Effect of holes for different layer of composite material (epoxy/polypropylene laminates) / Zahari Ahmad. (2001) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Hasim, Mohd Harith and Shafie, Mohd Nordin (2001) Energy auditing at UiTM buildings / Mohd Harith Hasim and Mohd Nordin Shafie. (2001) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Hussin, Ahmad Zaidi (2001) Absorption refrigeration cycle for residential air-conditioning unit, by using combustion of natural gas as an energy supply / Ahmad Zaidi Hussin. (2001) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Md. Yunus, Iskandar Zulkarnaen (2001) Cooling system of automotive engine / Iskandar Zulkarnaen Md. Yunus. (2001) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Student Project

A. Rahman, Mohd. Darnalis and Zainol, Noor Ikhsan (2001) Virtual laboratory: the grain fineness number / Mohd. Darnalis A. Rahman and Noor Ikhsan Zainol. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Abas, Mat Rasid and Zakaria, Mohd Zamri (2001) Development of Cyclozos Based Catalytic Converter for motorcycles / Mat Rasid Abas and Mohd Zamri Zakaria. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Abd Ghani, Azlan and Zulkifli, Zurean Azuan and Ismail, Ismani Zikri (2001) Top overhauling on Audi – 100 engine / Azlan Abd Ghani, Zurean Azuan Zulkifli and Ismani Zikri Ismail. (2001) [Student Project] (Unpublished)

Abd Rahman, Muhamad Nor Sharizal and Mior Ahmad, Mior Shahrulnizam and Abdullah, Mohammad Azizi (2001) Optimization of brake master production process (gravity die casting) / Muhamad Nor Sharizal Abd Rahman, Mior Shahrulnizam Mior Ahmad and Mohammad Azizi Abdullah. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Abd. Rahman, Mohd Ridzwan and Abdul Ghani, Rohaizi and Sehak, Hanisah (2001) To study the effect of heat treatment on the mechanical properties of low-alloy cold work steel / Mohd Ridzwan Abd. Rahman, Rohaizi Abdul Ghani and Hanisah Sehak. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Abd. Razak, Mohd Fauzi and Abdullah, Khairul Anwar (2001) Testing on power plus device for fuel consumption and exhaust emission / Mohd Fauzi Abd. Razak and Khairul Anwar Abdullah. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Abdul Aziz, Azham and Ramli, Khairul Hasli and Jusoh, Mohd. Ruzely (2001) Fabrication of mould for RC glider wing section using CAD/CAM / Azham Abdul Aziz, Khairul Hasli Ramli and Mohd. Ruzely Jusoh. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Abdul Aziz, Mohd Iswandi and Wan Alwi, Wan Azman (2001) The environmental effect on tensile strength and modulus of elasticity of PP/cloth composite / Mohd Iswandi Abdul Aziz and Wan Azman Wan Alwi. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Abdul Hamid, Mohd Faizal and Ahmed, Ridzuan and Omar, Sulaiman (2001) Ergonomics: assessment of sleeping characteristics of part 06 students in Mechanical Engineering UiTM / Mohd Faizal Abdul Hamid, Ridzuan Ahmed and Sulaiman Omar. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Abdul Latiff, Ahmad Zuwairi and Mohd Zain, Badrul Syah and Mat Isa, Mohd Azrulnizam and Hassan, Muhamad Fauzi (2001) Automotive breaker triggered coil ignition system / Ahmad Zuwairi Abdul Latiff … [et al.]. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Abdul Muhaimin, Ahmad Muzahar and Ihwan, Suhaimi (2001) Emission of exhaust system (exhaust pollutant) / Ahmad Muzahar Abdul Muhaimin and Suhaimi Ihwan. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Abdul Rahman, Muhammad Fadzli and Ismail, Md Zulkhairi (2001) Design of a plastic injection mold (8 cavities) / Muhammad Fadzli Abdul Rahman and Md Zulkhairi Ismail. (2001) [Student Project] (Unpublished)

Abdullah, Ahmedsyah and Bahsan, Rosnadiah and Abu Bakar, Norlela Wati (2001) Studies of slip gauge calibration using TESA UPC system / Ahmedsyah Abdullah, Rosnadiah Bahsan and Norlela Wati Abu Bakar. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Abdullah, Mohd Izuddin and Norani, Norhamizal (2001) Impact performance of poly-matrix composite reinforced foam / Mohd Izuddin Abdullah and Norhamizal Norani. (2001) [Student Project] (Unpublished)

Abdullah, Saiful Bakhtiar and Mohammad, Ahmad Shaiful Mazran and Sadarudin, Noor Edzwan Hishamuddin (2001) The degradation of plastics (cars) / Saiful Bakhtiar Abdullah, Ahmad Shaiful Mazran Mohammad and Noor Edzwan Hishamuddin Sadarudin. (2001) [Student Project] (Unpublished)

Abu Othman, Nor Liawati and Priman, Rosita and Abdul Jalal, Marliza (2001) Fluid flow measurement / Nor Liawati Abu Othman, Rosita Priman and Marliza Abdul Jalal. (2001) [Student Project] (Unpublished)

Abu Samah, Razif and Sanip, Hisam (2001) Truss optimization / Razif Abu Samah and Hisam Sanip. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Ahmad, Mohamad Arhosazani and Suukhi, Ahmad Shakir and Selamat, Mohamad Faizul (2001) Software development for the operation of quick vision measuring machine / Mohamad Arhosazani Ahmad, Ahmad Shakir Suukhi and Mohamad Faizul Selamat. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Ahmad, Mohd Fadzrul and Mohamed Aris, Mohamad Azlan and Jamaain, Hasnadi (2001) Experimental design of beam under flexural loading / Mohd Fadzrul Ahmad, Mohamad Azlan Mohamed Aris and Hasnadi Jamaain. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Anuar, Muhammad Azhan and Miskan, Mohd Nuh and Mohamed Salim, Sanee Ahmed Nazeeh (2001) Kelengkapan tambahan pada set golf / Muhammad Azhan Anuar, Mohd Nuh Miskan and Sanee Ahmed Nazeeh Mohamed Salim. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Ashaari, Muhamad Fuad and Bidin, Zulkiflee (2001) Activated carbon evaluation on butane working capacity (BWC) for canister / Muhamad Fuad Ashaari and Zulkiflee Bidin. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Baharulrazi, Mohd. Farriz and Mohamad Alli, Farah Hani and Abd. Hamid, Rosmaria (2001) Newly modified tensile test fixture / Mohd. Farriz Baharulrazi, Farah Hani Mohamad Alli and Rosmaria Abd. Hamid. (2001) [Student Project] (Unpublished)

Draman, Mahadi (2001) Demonstration of automatic gearbox II / Mahadi Draman. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Geong, Denis and Muhammad, Zaharuddin and Md Noor, Mohd Rosli (2001) Inspection of welding defects by using ultrasonic method / Denis Geong, Zaharuddin Muhammad and Mohd Rosli Md Noor. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Ijar, Mohamad Fauzi and Husin, Fazly Husaime and Ismail, Khairul Hidayat and Ali, Suhirman (2001) The comparison of ECVT and proton automatic gear box / Mohamad Fauzi Ijar … [et al.]. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Ismail, Iza Azaha and Mohd. Daud, Wan Sulaiman (2001) Study the performance of different types of fin in air cooling system heat transfer / Iza Azaha Ismail and Wan Sulaiman Mohd. Daud. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Ismail, Mahathir (2001) Educational torsion tester / Mahathir Ismail. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Ismail Rajab, Mohd Faisal (2001) The heat pump components and structural engineering drawing by autocad / Mohd Faisal Ismail Rajab. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Kamaruddin, Asliza and Alias, Normaslina (2001) Study of technology of foundry / Asliza Kamaruddin and Normaslina Alias. (2001) [Student Project] Physical item is in process (Unpublished)

Kamsah, Ahmad Ismail and Mah Hasan, Mohd Zainudin (2001) Case study in sheet metal forming of bracket stabilizer / Ahmad Ismail Kamsah and Mohd Zainudin Mah Hasan. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Kamsun, Khairil Anuar and Hassan, Mohd Ashadi @ Syam (2001) Estimation of mass moment inertia of ultralight boom frame (Yuri 1) / Khairil Anuar Kamsun and Mohd Ashadi @ Syam Hassan. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Mahat, Khamis Rezan and Jalaludin, Ahmad Shuhaimi and Ali, Mohd Irwan (2001) Study on car body frame manufacturing / Khamis Rezan Mahat, Ahmad Shuhaimi Jalaludin and Mohd Irwan Ali. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Mahmud, Mahyuddin and Abd Hadi, Mohd Hairi and Abu Shahar, Zulhilmi (2001) Model of manual car wash system / Mahyuddin Mahmud, Mohd Hairi Abd Hadi and Zulhilmi Abu Shahar. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Mamat, Mat Nizi and Wan Mahmud, Wan Musa (2001) Application of solar energy in cathodic protection of buried pipelines / Mat Nizi Mamat and Wan Musa Wan Mahmud. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Mat Jani, Abdullah Syahril and Jamaluddin, Azrein and Ghazali @ Mat Rol, Mohamad Fahmi (2001) Fuel vapour recovery / Abdullah Syahril Mat Jani, Azrein Jamaluddin and Mohamad Fahmi Ghazali @ Mat Rol. (2001) [Student Project] (Unpublished)

Mazlan, Mohd Johanes and Che Pa, Zarul Fauzy and Khalid, Khirman (2001) Fuel injection system: studies and comparison of Proton, Japanese and continental cars / Mohd Johanes Mazlan, Zarul Fauzy Che Pa and Khirman Khalid. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Mohamad, Azihan and Abdul Rahman, Anuar (2001) Determination of stress distribution along the specimen width for any laminate and prediction of notched strength by using appropriate formulation and computational method / Azihan Mohamad and Anuar Abdul Rahman. (2001) [Student Project] (Unpublished)

Mohamad Jamari, Effandi and Kandar, Mohamad Shahruddin (2001) Test engine bed TD-10 upgrading for radical combustion testing / Effandi Mohamad Jamari and Mohamad Shahruddin Kandar. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Mohamed, Azli and Borhan, Zuraimi (2001) To study the work design of a small manufacturing industry in order to improve its productivity / Azli Mohamed and Zuraimi Borhan. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Mohd Dakir, Mohd Nazari and Mokhtar, Mohd Nazrol and Abdul Latib, Ahmad Zaki (2001) Semi automatic transmission using motor wiper / Mohd Nazari Mohd Dakir, Mohd Nazrol Mokhtar and Ahmad Zaki Abdul Latib. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Mohd Fahmi, Mohd Fazli and Abu Talab, Mohd Helmi Rizal and Shaharudin, Mohd Ali Hanafiah and Saadon, Lukman Hakim (2001) Maintanance of gearbox / Mohd Fazli Mohd Fahmi … [et al.]. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Mohd Taib, Abdul Hapiz and Jamaluddin, Mohd Azwan Affendi and Abd Majid, Mohd Faizal and Bohari, Mohd Firdaos (2001) The steering system case study: power assisted steering system / Abdul Hapiz Hj Mohd Taib … [et al.]. (2001) [Student Project] (Unpublished)

Mohd Zahudi, Zafrul Idham and Raymond, Ernest Eric (2001) Energy auditing for Faculty of Applied Science building / Zafrul Idham Mohd Zahudi and Ernest Eric Raymond. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Mohd. Shaite, Mohd. Shairizal and Md. Said, Khairulnizam (2001) The fabrication of RC engine model crankshaft / Mohd. Shairizal Mohd. Shaite and Khairulnizam Md. Said. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Musa, Mohd Kholid and Abu Bakar, Mohd Hanif (2001) Heat transfer theory represently by heat pipe / Mohd Kholid Musa and Mohd Hanif Abu Bakar. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Mustafa, Mohd Fairus and Salim @ Abdullah, Saidi (2001) Lubricant oil test as base on engine maintenance / Mohd Fairus Mustafa and Saidi Salim @ Abdullah. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Mustaffa, Mohd Izzed and Jamaludin, Khairil Azwan and Abd Razak, Mohamad Razidi and Alhabshi, Syed Ariff and Yusoh@Harun, Hazizul and Mohd Mohidin, Mohd Zulfarhan (2001) Design, manufacture and testing an aircraft model / Mohd Izzed Mustaffa ... [et al.]. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Ngah, Syaifudin and Ibrahim, Ahmad Sukri (2001) A case study on electrical and electronics system of a car -Proton Perdana E55A- SOHC / Syaifudin Ngah and Ahmad Sukri Ibrahim. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Nioh, Kamal and Malang Jok, Henry and Philip, Adeleen Jacqueline (2001) Modification of sate grill / Kamal Nioh, Henry Malang Jok and Adeleen Jacqueline Philip. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Osmin, Muhamad Shah and Hashim, Muhammad Fahmi and Abd. Kadir, Mohd Zulharis and Abu Hassan, Mohamed Heszzuddin (2001) Fuel injection system / Muhamad Shah Osmin ... [et al.]. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Othman, Muhamed Fairuz and Kamaralzaman, Shahimi Nor (2001) Malaysian sky simulator for energy studies in buildings / Muhamed Fairuz Othman and Shahimi Nor Kamaralzaman. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Ramli, Mohd Nazir and Mohd Adnan, Mohd Nafzanee (2001) Solid shaft design using computer aided analysis / Mohd Nazir Ramli and Mohd Nafzanee Mohd Adnan. (2001) [Student Project] (Unpublished)

Rumpa, Affandi and Keli, Dominic Christopher (2001) Exergy evaluation of supercritical steam power plant generation / Affandi Rumpa and Dominic Christopher Keli. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Said, Md. Asmawi and Wan Ismail, Wan Sadeli (2001) Bearing damage analysis / Md. Asmawi Said and Wan Sadeli Wan Ismail. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Salam, Zainila and Michael, Samson (2001) Design and manufacture of a plastic dressing forceps using CAD/CAM technique / Zainila Salam and Samson Michael. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Selamat, Mohd Azni and Jamlus, Mohd Farid and Abdullah, Mohd Alias (2001) Intelligent building system / Mohd Azni Selamat, Mohd Farid Jamlus and Mohd Alias Abdullah. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Shahor, Abdul Rahim and Khamis, Azhari (2001) Slope limit for car with caravan combo / Abdul Rahim Shahor and Azhari Khamis. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Syed Hassan, Syed Khomeini and Abd. Rahman, Abd. Manan and Abu Bakar, Mohd Firdaus (2001) Educational tensile tester / Syed Khomeini Syed Hassan, Abd. Manan Abd. Rahman and Mohd Firdaus Abu Bakar. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Tajib, Nor Azrul and Minhad, Mohamad Helmi and Robani, Mohd. Zulhair (2001) Pemilihan institut pengajian tinggi awam dalam bidang sains dan teknologi menggunakan kaedah pengkadaran faktor / Nor Azrul Tajib, Mohamad Helmi Minhad and Mohd. Zulhair Robani. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Tugiman, Mohd Najib and Muhd Fakhruddin, Rusi (2001) Buckling characteristic of C-column / Mohd Najib Tugiman and Rusi Muhd Fakhruddin. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Wan Ahmad Samsuddin, Wan Noorhayani and Mohamad Bayuri, Noraini (2001) Performance testing of reciprocating compressor / Wan Noorhayani Wan Ahmad Samsuddin and Noraini Mohamad Bayuri. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Wan Khalid, Wan Samsudin (2001) Sacrificial anode cathodic protection of buried pipes / Wan Samsudin Wan Khalid. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Yusof, Hamidi and Mohd Ghani, Mohd Hezri and Abdul Rahman, Ardi (2001) Portable air cooler / Hamidi Yusof, Mohd Hezri Mohd Ghani and Ardi Abdul Rahman. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Zainal, Mohd. Mozehan and Pusin, Denni (2001) Rotor blade wing / Mohd. Mozehan Zainal and Denni Pusin. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

This list was generated on Tue Dec 30 23:06:13 2025 UTC.