Items where Division is "Faculty of Mechanical Engineering" and Year is 2001

Group by: Creators | Item Type | No Grouping
Number of items: 65.

Virtual laboratory: the grain fineness number / Mohd. Darnalis A. Rahman and Noor Ikhsan Zainol. (2001) [Student Project] (Unpublished)

Top overhauling on Audi – 100 engine / Azlan Abd Ghani, Zurean Azuan Zulkifli and Ismani Zikri Ismail. (2001) [Student Project] (Unpublished)

Optimization of brake master production process (gravity die casting) / Muhamad Nor Sharizal Abd Rahman, Mior Shahrulnizam Mior Ahmad and Mohammad Azizi Abdullah. (2001) [Student Project] (Unpublished)

To study the effect of heat treatment on the mechanical properties of low-alloy cold work steel / Mohd Ridzwan Abd. Rahman, Rohaizi Abdul Ghani and Hanisah Sehak. (2001) [Student Project] (Unpublished)

Testing on power plus device for fuel consumption and exhaust emission / Mohd Fauzi Abd. Razak and Khairul Anwar Abdullah. (2001) [Student Project] (Unpublished)

Fabrication of mould for RC glider wing section using CAD/CAM / Azham Abdul Aziz, Khairul Hasli Ramli and Mohd. Ruzely Jusoh. (2001) [Student Project] (Unpublished)

The environmental effect on tensile strength and modulus of elasticity of PP/cloth composite / Mohd Iswandi Abdul Aziz and Wan Azman Wan Alwi. (2001) [Student Project] (Unpublished)

Ergonomics: assessment of sleeping characteristics of part 06 students in Mechanical Engineering UiTM / Mohd Faizal Abdul Hamid, Ridzuan Ahmed and Sulaiman Omar. (2001) [Student Project] (Unpublished)

Automotive breaker triggered coil ignition system / Ahmad Zuwairi Abdul Latiff … [et al.]. (2001) [Student Project] (Unpublished)

Emission of exhaust system (exhaust pollutant) / Ahmad Muzahar Abdul Muhaimin and Suhaimi Ihwan. (2001) [Student Project] (Unpublished)

Design of a plastic injection mold (8 cavities) / Muhammad Fadzli Abdul Rahman and Md Zulkhairi Ismail. (2001) [Student Project] (Unpublished)

Studies of slip gauge calibration using TESA UPC system / Ahmedsyah Abdullah, Rosnadiah Bahsan and Norlela Wati Abu Bakar. (2001) [Student Project] (Unpublished)

Impact performance of poly-matrix composite reinforced foam / Mohd Izuddin Abdullah and Norhamizal Norani. (2001) [Student Project] (Unpublished)

The degradation of plastics (cars) / Saiful Bakhtiar Abdullah, Ahmad Shaiful Mazran Mohammad and Noor Edzwan Hishamuddin Sadarudin. (2001) [Student Project] (Unpublished)

Fluid flow measurement / Nor Liawati Abu Othman, Rosita Priman and Marliza Abdul Jalal. (2001) [Student Project] (Unpublished)

Truss optimization / Razif Abu Samah and Hisam Sanip. (2001) [Student Project] (Unpublished)

Software development for the operation of quick vision measuring machine / Mohamad Arhosazani Ahmad, Ahmad Shakir Suukhi and Mohamad Faizul Selamat. (2001) [Student Project] (Unpublished)

Experimental design of beam under flexural loading / Mohd Fadzrul Ahmad, Mohamad Azlan Mohamed Aris and Hasnadi Jamaain. (2001) [Student Project] (Unpublished)

Effect of holes for different layer of composite material (epoxy/polypropylene laminates) / Zahari Ahmad. (2001) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Kelengkapan tambahan pada set golf / Muhammad Azhan Anuar, Mohd Nuh Miskan and Sanee Ahmed Nazeeh Mohamed Salim. (2001) [Student Project] (Unpublished)

Activated carbon evaluation on butane working capacity (BWC) for canister / Muhamad Fuad Ashaari and Zulkiflee Bidin. (2001) [Student Project] (Unpublished)

Newly modified tensile test fixture / Mohd. Farriz Baharulrazi, Farah Hani Mohamad Alli and Rosmaria Abd. Hamid. (2001) [Student Project] (Unpublished)

Demonstration of automatic gearbox II / Mahadi Draman. (2001) [Student Project] (Unpublished)

Inspection of welding defects by using ultrasonic method / Denis Geong, Zaharuddin Muhammad and Mohd Rosli Md Noor. (2001) [Student Project] (Unpublished)

Energy auditing at UiTM buildings / Mohd Harith Hasim and Mohd Nordin Shafie. (2001) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Absorption refrigeration cycle for residential air-conditioning unit, by using combustion of natural gas as an energy supply / Ahmad Zaidi Hussin. (2001) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

The comparison of ECVT and proton automatic gear box / Mohamad Fauzi Ijar … [et al.]. (2001) [Student Project] (Unpublished)

Study the performance of different types of fin in air cooling system heat transfer / Iza Azaha Ismail and Wan Sulaiman Mohd. Daud. (2001) [Student Project] (Unpublished)

The heat pump components and structural engineering drawing by autocad / Mohd Faisal Ismail Rajab. (2001) [Student Project] (Unpublished)

Case study in sheet metal forming of bracket stabilizer / Ahmad Ismail Kamsah and Mohd Zainudin Mah Hasan. (2001) [Student Project] (Unpublished)

Estimation of mass moment inertia of ultralight boom frame (Yuri 1) / Khairil Anuar Kamsun and Mohd Ashadi @ Syam Hassan. (2001) [Student Project] (Unpublished)

Study on car body frame manufacturing / Khamis Rezan Mahat, Ahmad Shuhaimi Jalaludin and Mohd Irwan Ali. (2001) [Student Project] (Unpublished)

Model of manual car wash system / Mahyuddin Mahmud, Mohd Hairi Abd Hadi and Zulhilmi Abu Shahar. (2001) [Student Project] (Unpublished)

Application of solar energy in cathodic protection of buried pipelines / Mat Nizi Mamat and Wan Musa Wan Mahmud. (2001) [Student Project] (Unpublished)

Fuel vapour recovery / Abdullah Syahril Mat Jani, Azrein Jamaluddin and Mohamad Fahmi Ghazali @ Mat Rol. (2001) [Student Project] (Unpublished)

Fuel injection system: studies and comparison of Proton, Japanese and continental cars / Mohd Johanes Mazlan, Zarul Fauzy Che Pa and Khirman Khalid. (2001) [Student Project] (Unpublished)

Cooling system of automotive engine / Iskandar Zulkarnaen Md. Yunus. (2001) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Determination of stress distribution along the specimen width for any laminate and prediction of notched strength by using appropriate formulation and computational method / Azihan Mohamad and Anuar Abdul Rahman. (2001) [Student Project] (Unpublished)

Test engine bed TD-10 upgrading for radical combustion testing / Effandi Mohamad Jamari and Mohamad Shahruddin Kandar. (2001) [Student Project] (Unpublished)

To study the work design of a small manufacturing industry in order to improve its productivity / Azli Mohamed and Zuraimi Borhan. (2001) [Student Project] (Unpublished)

Semi automatic transmission using motor wiper / Mohd Nazari Mohd Dakir, Mohd Nazrol Mokhtar and Ahmad Zaki Abdul Latib. (2001) [Student Project] (Unpublished)

Maintanance of gearbox / Mohd Fazli Mohd Fahmi … [et al.]. (2001) [Student Project] (Unpublished)

The steering system case study: power assisted steering system / Abdul Hapiz Hj Mohd Taib … [et al.]. (2001) [Student Project] (Unpublished)

Energy auditing for Faculty of Applied Science building / Zafrul Idham Mohd Zahudi and Ernest Eric Raymond. (2001) [Student Project] (Unpublished)

The fabrication of RC engine model crankshaft / Mohd. Shairizal Mohd. Shaite and Khairulnizam Md. Said. (2001) [Student Project] (Unpublished)

Heat transfer theory represently by heat pipe / Mohd Kholid Musa and Mohd Hanif Abu Bakar. (2001) [Student Project] (Unpublished)

Lubricant oil test as base on engine maintenance / Mohd Fairus Mustafa and Saidi Salim @ Abdullah. (2001) [Student Project] (Unpublished)

Design, manufacture and testing an aircraft model / Mohd Izzed Mustaffa ... [et al.]. (2001) [Student Project] (Unpublished)

A case study on electrical and electronics system of a car -Proton Perdana E55A- SOHC / Syaifudin Ngah and Ahmad Sukri Ibrahim. (2001) [Student Project] (Unpublished)

Modification of sate grill / Kamal Nioh, Henry Malang Jok and Adeleen Jacqueline Philip. (2001) [Student Project] (Unpublished)

Fuel injection system / Muhamad Shah Osmin ... [et al.]. (2001) [Student Project] (Unpublished)

Malaysian sky simulator for energy studies in buildings / Muhamed Fairuz Othman and Shahimi Nor Kamaralzaman. (2001) [Student Project] (Unpublished)

Solid shaft design using computer aided analysis / Mohd Nazir Ramli and Mohd Nafzanee Mohd Adnan. (2001) [Student Project] (Unpublished)

Exergy evaluation of supercritical steam power plant generation / Affandi Rumpa and Dominic Christopher Keli. (2001) [Student Project] (Unpublished)

Bearing damage analysis / Md. Asmawi Said and Wan Sadeli Wan Ismail. (2001) [Student Project] (Unpublished)

Design and manufacture of a plastic dressing forceps using CAD/CAM technique / Zainila Salam and Samson Michael. (2001) [Student Project] (Unpublished)

Intelligent building system / Mohd Azni Selamat, Mohd Farid Jamlus and Mohd Alias Abdullah. (2001) [Student Project] (Unpublished)

Slope limit for car with caravan combo / Abdul Rahim Shahor and Azhari Khamis. (2001) [Student Project] (Unpublished)

Educational tensile tester / Syed Khomeini Syed Hassan, Abd. Manan Abd. Rahman and Mohd Firdaus Abu Bakar. (2001) [Student Project] (Unpublished)

Pemilihan institut pengajian tinggi awam dalam bidang sains dan teknologi menggunakan kaedah pengkadaran faktor / Nor Azrul Tajib, Mohamad Helmi Minhad and Mohd. Zulhair Robani. (2001) [Student Project] (Unpublished)

Buckling characteristic of C-column / Mohd Najib Tugiman and Rusi Muhd Fakhruddin. (2001) [Student Project] (Unpublished)

Performance testing of reciprocating compressor / Wan Noorhayani Wan Ahmad Samsuddin and Noraini Mohamad Bayuri. (2001) [Student Project] (Unpublished)

Sacrificial anode cathodic protection of buried pipes / Wan Samsudin Wan Khalid. (2001) [Student Project] (Unpublished)

Portable air cooler / Hamidi Yusof, Mohd Hezri Mohd Ghani and Ardi Abdul Rahman. (2001) [Student Project] (Unpublished)

Rotor blade wing / Mohd. Mozehan Zainal and Denni Pusin. (2001) [Student Project] (Unpublished)

This list was generated on Thu Mar 28 08:52:53 2024 UTC.