Items where Subject is "Machinery exclusive of prime movers"

Group by: Creators | Item Type
Jump to: A | B | D | F | H | I | J | K | M | N | O | R | S | T | W | Y | Z
Number of items at this level: 71.

A

Abd Hamid, Hamdan (2005) Shape optimization of cantilever beam / Hamdan Abd Hamid. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

Abd Rahman, Mohd Razin Azim (2010) Evaluation of driving comfort among driver; MYVI 1.3 L (MANUAL) / Mohd Razin Azim Abd Rahman. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Abd Rahman, Muhamad Nor Sharizal and Mior Ahmad, Mior Shahrulnizam and Abdullah, Mohammad Azizi (2001) Optimization of brake master production process (gravity die casting) / Muhamad Nor Sharizal Abd Rahman, Mior Shahrulnizam Mior Ahmad and Mohammad Azizi Abdullah. (2001) [Student Project] (Unpublished)

Abd. Wahab, Ahmad Kazwini (2009) Modelling of drilling operation for measuring speed and feed rate / Ahmad Kazwini Abd. Wahab. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Abdul Rahman, Abdul Rahim and Saad, Muhamad Suwaid (1998) Radical combustion in two stroke engine / Abdul Rahim Abdul Rahman and Muhamad Suwaid Saad. (1998) [Student Project] (Unpublished)

Abdul Razak, Mohd Nizam and Jaafar, Shahar (1992) Model railway speed controller / Mohd Nizam Abdul Razak and Shahar Jaafar. (1992) [Student Project] (Unpublished)

Abu Bakar, Amir Farhan (2022) Effect of oxidation in engine oil lubricant on mercury outboard engine performance / Amir Farhan Abu Bakar. (2022) [Student Project] (Submitted)

Abu Bakar, Mimi Azlina and Kasolang, Salmiah and Ahmad, Mohamad Ali and Herman, Dedisaputra (2018) Tribological Effects of Additive Hybrid ZrO2/Al2O3 in Bio-Lubrication / Mimi Azlina Abu Bakar ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 35-43. ISSN 18235514

Ahmad, Abdul Hakim (2010) A study of tribological aspects in gearbox of CNG engine / Abdul Hakim Ahmad. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Ahmad, Azmee and Aziz, Azeze and Mohamed, Ahmad Dziaudin (1994) Kajian dan pengubahsuaian mesin stacker di Syarikat Kotak Malaysia Sendirian Berhad / Azmee Ahmad, Azeze Aziz and Ahmad Dziaudin Mohamed. (1994) [Student Project] (Unpublished)

Ali Afandi, Norafizal (2006) Experimental study of thrust performance for one-single stage solid rocket propellant / Norafizal Ali Afandi. (2006) Degree thesis, thesis, Universiti Teknologi MARA.

Azlan, Kamarul Azwan (2010) Wear characterization of a diesel engine using Ferrographic technique / Kamarul Azwan Azlan. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Azlan, Shahrool Azree (2015) Study of windblast interface element with Postura MotergoTM test rig / Shahrool Azree Azlan. (2015) Degree thesis, thesis, Universiti Teknologi MARA.

B

Basri, M. Hisyam and Ismail, N.I. and Pahmi, Arif and Rabilah, R. and Sharudin, Hazim (2025) Design explorations on the brake force distributions of a motorbike / M. Hisyam Basri ... [et al.]. (2025) Journal of Applied Engineering Design & Simulation (JAEDS), 5 (1): 7. pp. 66-74. ISSN 2805-5756

D

Draman, Mahadi (2001) Demonstration of automatic gearbox II / Mahadi Draman. (2001) [Student Project] (Unpublished)

Dzulhelmy, Muhammad Danish and Michael, Zeno (2022) To design and fabricate of an innovative multipurpose hand truck / Muhammad Danish Dzulhelmy and Zeno Michael. (2022) In: Prototype Design Collection Series 1. School of Mechanical Engineering, Universiti Teknologi MARA, Johor, pp. 1-213. ISBN 978-967-0033-15-0

F

Fauzi, Mohamad Ikram (2022) Effect of oxidation in engine oil lubricant on Yamaha outboard engine performance / Mohamad Ikram Fauzi. (2022) [Student Project] (Submitted)

H

Hamzah, Siti Hawa (Prof. Madya Ir.) and Yong, Chua Bon and Saari @Ash'ari, Nadiah and Marwi, Mat Som (2003) PSSDB load bearing wall with window opening - effect of butt joint in dryboard / Prof Madya Ir. Siti Hawa Hamzah …[et al.]. (2003) [Research Reports] (Unpublished)

Hassan, Mohd Hasrizal and Mamat, Mohd Shahril and Ismail, Zakari (2002) A study of an elevator / Mohd Hasrizal Hassan, Mohd Shahril Mamat and Zakari Ismail. (2002) [Student Project] (Unpublished)

Hussin, Hafiz Zaim (2010) Simulation of chiller water storage / Hafiz Zaim Hussin. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

I

Ibrahim, Dzullijah and Jamaludin, Muhamad Haziq and Ab Hamid Pahmi, Muhammad Arif and Yaakob, Yusli (2017) Improvement on the external transmission system of a single-seated open wheel vehicle / Dzullijah Ibrahim. (2017) ESTEEM Academic Journal, 13 (June). pp. 133-145. ISSN 1675-7939

Ismail, Muhammad Haziq Hilmy (2022) Effect of moisture contamination in gear oil lubricant on Yamaha outboard engine performance / Muhammad Haziq Hilmy Ismail. (2022) [Student Project] (Unpublished)

ishak, Nik Mohd Ikrami and Mohamad Zali, Mohd Sabri (2003) A study of a granite crusher plant in Bina Quarry / Nik Mohd Ikrami Ishak and Mohd Sabri Mohamad Zali. (2003) [Student Project] (Unpublished)

J

Jamil, Raimi (2007) Automated guided vehicle (AGV) handling investigation through simulation / Raimi Jamil. (2007) [Student Project]

Jerol, Alfonso Muze (2003) Effect of pre-seted residual stress on the spur gear / Alfonso Muze Jerol. (2003) Degree thesis, thesis, Universiti Teknologi MARA.

Johar, Razman Marsoff and Wan Yusof, Wan Zul Atfi Yusmar (1999) Research of mechanical components of the Malaysian army tank Alvis Scorpion 90 / Razman Marsoff Johar and Wan Zul Atfi Yusmar Wan Yusof. (1999) [Student Project] (Unpublished)

K

Kamarul Zaman, Muhammad Syakir and Yahya, Mohd Fazrydeen (2017) Electro-strip / Muhammad Syakir Kamarul Zaman and Mohd Fazrydeen Yahya. (2017) [Entrepreneurship Project] (Unpublished)

M

Mardzuki, Mohd. Nazre and Ya, Hamdan (1987) Coriolis component of acceleration apparatus / Mohd. Nazre Mardzuki and Hamdan Ya. (1987) [Student Project] (Unpublished)

Mathan, Zainal and Bahari, Mahani (2002) Predictive maintenance of air cooled condenser fan gearbox using vibration analysis / Zainal Mathan and Mahani Bahari. (2002) [Student Project] (Unpublished)

Md. Boizi, Md. Farid (2021) The improvements of spark ignition (SI) engine's performance and emissions using different research octane number (RON) gasoline blend with ethanol - methanol / Md. Farid Md. Boizi. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

Mesror, Ismail (2005) Automobile brake pad friction and wear test rig: Fabrication / Ismail Mesror. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

Mohamad, Abdul Aziz (1991) Pengapit gerudi / Abdul Aziz Mohamad. (1991) [Student Project] (Unpublished)

Mohamed Saini, Mohamed Heikal (2010) Investigation on the driver's brake application behaviours during emergency braking / Mohamed Heikal Mohamed Saini. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Mohamed Shariff, Mohammad and Sallehudin, Harith Shah and Aman, Saiful Adli (2002) Model automatic horizontal bandsaw machine II / Mohammad Mohamed Shariff, Harith Shah Sallehudin and Saiful Adli Aman. (2002) [Student Project] (Unpublished)

Mohammed Asari, Muhammad Salim (1991) Perbandingan terhadap erotan didalam unjuran-unjuran yang digunakan di Semenanjung Malaysia / Muhammad Salim Mohammed Asari. (1991) Advanced Diploma thesis, thesis, Institut Teknologi MARA (ITM).

Mohd Fauzi, Alif Darwisy (2023) Design and fabrication of a self-balancing device for food delivery / Alif Darwisy Mohd Fauzi. (2023) [Student Project] (Unpublished)

Mohd Fauzi, Alif Darwisy and Kamardin, Nur Kamarliah and Yusuf, Ahmad Idzwan (2023) Design and fabrication of a self-balancing device for food delivery / Alif Darwisy Mohd Fauzi, Nur Kamarliah Kamardin and Ahmad Idzwan Yusuf. (2023) In: Prototype Design Collection Series 2. School of Mechanical Engineering, Universiti Teknologi MARA, Johor, pp. 1-320.

Mohd Nor, Mohd Zulkhafizi (2010) Design of vernier tool for inspection of weldment / Mohd Zulkhafizi Mohd Nor. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Mohd Safki, Syarmizar and Yusof, Mohd Firdaus (2003) Hydraulic Powered Fan (HPF) / Syarmizar Mohd Safki and Mohd Firdaus Yusof. (2003) [Student Project] (Unpublished)

Mohd Said, Azman and Baba, Mohamed Noor and Ab. Manaf, Mohd Nasir (1987) Automotive teaching aid with instrumentation for Morris Marina (3L engine part 3) / Azman Mohd Said, Mohamed Noor Baba and Mohd Nasir Ab. Manaf. (1987) [Student Project] (Unpublished)

Mohd Shukri, Muhammad Zuraidi (2009) Multi planes balancing of rotating element / Muhammad Zuraidi Mohd Shukri. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Mohd Taib, Abdul Hapiz and Jamaluddin, Mohd Azwan Affendi and Abd Majid, Mohd Faizal and Bohari, Mohd Firdaos (2001) The steering system case study: power assisted steering system / Abdul Hapiz Hj Mohd Taib … [et al.]. (2001) [Student Project] (Unpublished)

Mohd Yusof, Ahmad Fazilah (2010) Emission products analysis on 2 stroke internal combustion engine single powered by hydrogen gas / Ahmad Fazilah Mohd Yusof. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Mohd Yusof, Muhammad Khairi Afiq (2010) Conceptual design of hydrogen PROTON Exchange Membrane (PEM) fuel cell powered vehicle: power plant / Muhammad Khairi Afiq Mohd Yusof. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Muhamad Fuzi, Abdul Habib and Abu Bakar, Ahmad Najib (2000) To investigate and diagnose the engine problems and used it as a study purpose / Abdul Habib Muhamad Fuzi and Ahmad Najib Abu Bakar. (2000) [Student Project] (Unpublished)

N

Nasir, Norazne and Saad, Nor Hayati and Sahruddin, Fatin Syafinaz and Ab Wahab, Norrul Hafizan (2017) Fine Bone China Product using Ceramics Slip Rotary Moulding (CSRM) Technique / Norazne Nasir ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 31-42. ISSN 18235514

Nik Jaafar, Nik Ahmed Jafni (1990) A model study on bearing capacity and settlement of single pile in sand / Nik Ahmed Jafni Nik Jaafar. (1990) [Student Project] (Unpublished)

Nina Mohd, Abdul Malik and Mohd Ali, Mohd Azelan and Wan Zain, Wan Rizam (1989) Mengubahsuai dan membuat mesin potong rumput / Abdul Malik Nina Mohd, Mohd Azelan Mohd Ali and Wan Rizam Wan Zain. (1989) [Student Project] (Unpublished)

Norrdin, Noor Aniza (2016) Three dimensional cutting force and tool deflection in micro-end milling AISI D2 / Noor Aniza Norrdin. (2016) Masters thesis, thesis, Universiti Teknologi MARA.

O

Omar, Zarina and Mohd Yazan, Maimunatun Nawar and Mod Zahari, Iffat Asymawie and Ahmad Shakri, Nurul Izzah and Abd Razak, Nur Diana (2021) Study on the hydrogen storage properties of NaAlH4 composites using taguchi method / Zarina Omar. (2021) [Student Project] (Unpublished)

Othman, Nor Azlan and Damanhuri, Nor Salwa and Kadirkamanathan, Visakan (2009) Fault diagnosis in rotating machinery using pattern recognition technique / Nor Azlan Othman, Nor Salwa Damanhuri and Visakan Kadirkamanathan. (2009) ESTEEM Academic Journal, 5 (1). pp. 125-143. ISSN 1675-7939

Othman, Rasyidah and Yusof, Zuraidi (1999) Condition monitoring of bearings using vibrations / Rasyidah Othman and Zuraidi Yusof. (1999) [Student Project] (Unpublished)

R

Rahmadanur, Maulana Haydil and Soegiharto, Achmad Fauzan Hery and -, Muhammad Syafiq and -, Imam Sholihin and S, Gusti Dimas (2025) The investigation of additional cooling fan on the brake system to overcome the overheating issue: a case study of oil cooler retarder brake / Maulana Haydil Rahmadanur ... [et al.]. (2025) Journal of Mechanical Engineering (JMechE), 22 (1): 15. pp. 207-222. ISSN e-ISSN: 2550-164X

Razali, M. F. and Seman, S.A.H.A. and Theng, T. W. (2021) Effect of fiber misalignment on mechanical and failure response of kenaf composite under compressive loading / M. F. Razali, S.A.H.A. Seman and T. W. Theng. (2021) Journal of Mechanical Engineering (JMechE), 8 (2). pp. 177-191. ISSN (eISSN):2550-164X

Romzan, Rahmat Nizam and Hashim, Mohd Hezrin and Razali, Norfazizi (2002) Variable Valve Timing / Rahmat Nizam Romzan, Mohd Hezrin Hashim and Norfazizi Razali. (2002) [Student Project] (Unpublished)

S

S.N., Ashwindran and A.A., Azizuddin and A.N., Oumer (2020) An introductory CFD analysis study of novel cavity vane driven wind turbine blade design / S.N. Ashwindran... [et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (3). pp. 55-68. ISSN 1823-5514 ; 2550-164X

Said, Md. Asmawi and Wan Ismail, Wan Sadeli (2001) Bearing damage analysis / Md. Asmawi Said and Wan Sadeli Wan Ismail. (2001) [Student Project] (Unpublished)

Samin, R. and Hao, N.C. and As’arry, A. and M. Rezali, K.A. and Nuawi, M.Z. (2018) Effect of Disc Brake Squeal with Respect to Thickness Variation : Experimental Modal Analysis / R. Samin ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 33-44. ISSN 18235514

Shamsudin, Daim Asmizan (2022) Investigation on dynamic motion of four bar chain / Daim Asmizan Shamsudin. (2022) [Student Project] (Submitted)

Sinin, Mohammad Hamidi (2010) Braking behaviour among motorcyclist: comparison of the rear brake using hand braking type and leg braking type / Mohammad Hamidi Sinin. (2010) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Socret, Mackenzie and Mohd Rawi, Mohd Ikram and Miskam, Mohd Ashriq (2002) Failure analysis on Kriss motorcycle handle locking mechanism / Mackenzie Socret ... [et al.]. (2002) [Student Project] (Unpublished)

Stapah@Salleh, Mustafa (2017) Development of automatic device for the prediction of next oil change requirement for an automobile / Mustafa Stapah@Salleh. (2017) [Student Project] (Submitted)

Suhaimi, Muhammad Syahrin and Wan Fauzi, Wan Muhammad Syahmi (2022) Development of an adjustable-motorized wheelbarrow / Muhammad Syahrin Suhaimi and Wan Muhammad Syahmi Wan Fauzi. (2022) In: Prototype Design Collection Series 1. School of Mechanical Engineering, Universiti Teknologi MARA, Johor, pp. 1-213. ISBN 978-967-0033-15-0

T

Tuan Mohd Hashim, Tengku Afiq Nasir (2010) Reverse engineering: 3 kW polymer electrolyte membrane fuel cell for UPS system / Tengku Afiq Nasir Tuan Mohd Hashim. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

W

Wan Razali, Wan Mohd Hafizan (2009) Experimental aerodynamics of Blended Wing Body (BWB) Unmanned Aerial Vehicle (UAV) with elevator deflection of +15° and -15° using wind tunnel (Mach number 0.1-0.15) / Wan Mohd Hafizan Wan Razali. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Y

Yaacob, Abdul Razak and Jok, Wan Anyie (1995) Psychrometrics For Shah Alam / Abdul Razak Yaacob and Wan Anyie Jok. (1995) [Student Project] (Unpublished)

Yacob, Mohammad Rosli and Abdul Rahman, Ahmad Kamal (1985) Merekabentuk jig and fixture bagi cakera brek / Mohammad Rosli Yacob and Ahmad Kamal Abdul Rahman. (1985) [Student Project] (Unpublished)

Z

Zahadi@ Zohdi, Azni and Che Daud, Hapiza Akmar (1993) Penyelidikan penggunaan mesin-mesin moden dalam sektor industri di Malaysia / Azni Zahadi@ Zohdi and Hapiza Akhar Che Daud. (1993) [Student Project] (Unpublished)

Zaharudin, Aznifa Mahyam (2017) Optimization and tribological properties of semi metallic friction materials / Aznifa Mahyam Zaharudin. (2017) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Zainordin, Muhamad Syamim (2015) Enhancement of the Postura Motergo™ test rig's dynamics / Muhamad Syamim Zainordin. (2015) Degree thesis, thesis, Universiti Teknologi MARA.

Zakaria, Zilaila (2017) An enhancement of energy efficiency based on the voltage reduction with optimal capacitor placement and sizing / Zilaila Zakaria. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

This list was generated on Sat Jul 19 01:28:21 2025 UTC.