Items where Subject is "Thermochemistry"

Article

Abdul Hamid, Siti Atkah and Mansor, Abdul Aziz (2002) Parameter kehilangan pantulan (RL) komposit ferit (Lio.sFeo.s)o.4Nio.3ZnO.3Fe204 - termoplastik getah asli / Siti Atkah Abdul Hamid dan Abdul Aziz Mansor. (2002) Gading Jurnal Akademik, 1,2 (7). pp. 58-66. ISSN 0128-5599

Jamaluddin, Muhammad ‘Azim and Ismail, Khudzir and Ab Ghani, Zaidi and Mohd Ishak, Mohd Azlan and Abdullah, Fauzi and Idris, Siti Shawalliah and Mohammed Yunus, Mohammed Faisal and Tahiruddin, Shawaluddin and Mohd Hakimi, Noor Irma Nazashida (2012) A study on experimental characteristics of microwave-assisted pyrolysis of palm kernel shell / Muhammad ‘Azim Jamaluddin et al. (2012) Jurnal Intelek, 7 (2). pp. 16-21. ISSN 2682-9223

Raja Yahya, Mohd Fakharul Zaman and Shahidan, Athifah Najwani (2012) Influence of fresh and thermoxidized carotino oil on Cyclic Guanosine Monophosphate (cGMP) in erythrocytes from Sprague dawley rats / Mohd Fakharul Zaman Raja Yahya and Athifah Najwani Shahidan. (2012) Scientific Research Journal, 9 (1). pp. 63-70. ISSN 1675-7009

Sudibyo, Henny and Agustin, Nindia and Karo Karo, Pulung and Ali, Suprihatin and Rohman, Fakhrony Sholahudin and Ali Bashah, Nur Alwani (2023) Influence of sodium silicate, sodium aluminate, and Filicium decipiens charcoal on the conductivity of artificial zeolite / Henny Sudibyo ... [et al.]. (2023) ESTEEM Academic Journal, 19 (March). pp. 43-53. ISSN 2289-4934

Conference or Workshop Item

Jamdi, Muhammad Farhan and Mohd Zin, Azrinawati and Mohamed, Alina Rahayu (2020) Torrefaction of palm pressed fibre in a fixed bed reactor / Muhammad Farhan Jamdi, Dr Azrinawati Mohd Zin and Dr Alina Rahayu Mohamed. (2020) In: UNSPECIFIED.

Kamal, Norsyahirah Shamsul and Ramli, Muhammad Zahirudin and Chang, Siu Hua (2020) Production of bio coal from duckweed by dry torrefaction / Norsyahirah Shamsul Kamal, Muhammad Zahirudin Ramli and Chang Siu Hua. (2020) In: UNSPECIFIED.

Mohd Noor, Nurfarzana and Inderan, Vicinisvarri (2020) The analysis of Tin(IV) oxide prepared via hydrothermal treatment and ethanol gas sensing properties / Nurfarzana Mohd Noor and Vicinisvarri Inderan. (2020) In: UNSPECIFIED.

Thesis

Batar @ Badar, Nurhanna (2015) Nanostructured Mg and Al oxides by a combustion synthesis method and fabrication of the thin films by pulsed laser deposition / Nurhanna Batar @ Badar. (2015) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohammad Taib, Mohamad Nurul Azman (2014) The influence of hydrothermal and thermochemical treatment on properties of high density kenaf (Hibiscus cannabinus) fibreboard / Mohamad Nurul Azman Mohammad Taib. (2014) Masters thesis, thesis, Universiti Teknologi MARA.

Mohd Rafee, Muhammad Iskandar Zulkarnain (2020) Fabrication and characterization of PU/G composite : study on thermal and conductivity properties / Muhammad Iskandar Zulkarnain Mohd Rafee. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Mohd Yusof, Nor Farhana (2012) The study on expanded austenite formation of duplex stainless steels treated by low temperature carburizing in a tube furnace atmosphere / Nor Farhana Mohd Yusof. (2012) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Zamri, Amiratul Hanim (2022) A review on the thermal liquefaction process of polystyrene [PS] waste in bio-fuels productions / Amiratul Hanim Mohd Zamri. (2022) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Paijan, Lailatul Harina (2014) The study of structural development of expanded austenite on duplex stainless steel by low temperature thermochemical nitriding process / Lailatul Harina Paijan. (2014) Masters thesis, thesis, Universiti Teknologi MARA.

Sattar, Mohd Norhisham (2015) Mechanical and physical properties of fiberboard bonded by palm-based polyurethane resin at different equivalent weight ratios and hot pressing temperatures / Mohd Norhisham Sattar. (2015) Masters thesis, thesis, Universiti Teknologi MARA.

Zakaria, Zubri (2007) Thermal behaviour studies on coal-biomass blends during pyrolysis and combustion via thermogravimetric analysis / Zubri Zakaria. (2007) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Student Project

Aziz, Nor Ain Natasya (2023) The thermal stability of the potassium metal catalyst supported by activated carbon / Nor Ain Natasya Aziz. (2023) [Student Project] (Submitted)

Azman, Nur Syamimi Syahirah (2022) Effect of temperature and duration parameters on pyrolysis product quality in the catalytic co-pyrolysis of waste cotton fabric and plastic / Nur Syamimi Syahirah Azman. (2022) [Student Project] (Unpublished)

Azme, 'Aamirah and Abdul Rahim, Nurul Edora (2015) Potential of kenaf and coir fibers as thermal insulators / 'Aamirah Azme and Nurul Edora Abdul Rahim. (2015) [Student Project] (Unpublished)

Azmila, Az Iman Zikri (2024) Thermal stability K/AC and Na/AC catalyst for biodiesel production / Az Iman Zikri Azmila. (2024) [Student Project] (Unpublished)

Bahrim, Ahmad Ariffuddin (2015) Properties of insulation board made from rice husk and waste paper / Ahmad Ariffuddin Bahrim. (2015) [Student Project] (Unpublished)

Mat Fazli, Nur Izzati (2022) Synthesis and characterization of mesoporous zeolite from coal fly ash for bio-oil production / Nur Izzati Mat Fazli. (2022) [Student Project] (Unpublished)

Mohd Ezane, Nik Nur Syafeenaz (2020) Mechanical behaviour of special mortar made with palm oil fuel ash (pofa) as sand replacement under post fire condition / Nik Nur Syafeenaz Mohd Ezane. (2020) [Student Project] (Unpublished)

Mohd Fadzli, Muhammad Izzulwafiq (2023) The thermal stability of potassium metal catalysts at different carbonization temperature / Muhammad Izzulwafiq Mohd Fadzli. (2023) [Student Project] (Submitted)

Mohd Hambali, Nur Manisha Najihah (2024) Comparison of different PID tuning method for temperature process control / Nur Manisha Najihah Mohd Hambali. (2024) [Student Project] (Unpublished)

Mohd Kamil, Muhammad Haziq Firdaus (2024) Performance evaluation of Cohen-Coon and Ziegler-Nichols PID tuning methods in liquid flow control system / Muhammad Haziq Firdaus Mohd Kamil. (2024) [Student Project] (Unpublished)

Mohd Ridzuan, Noor Syafiqah (2025) Preparation of activated carbon from date pits using mechanical milling method / Noor Syafiqah Mohd Ridzuan. (2025) [Student Project] (Unpublished)

Muhamad Jihadi, Maizatul Sofia (2023) Production of fatty acid methyl ester using potassium metal supported on oil palm kernel shell activated carbon / Maizatul Sofia Muhamad Jihadi. (2023) [Student Project] (Submitted)

Muhammad Hanif, Nur Shazlinda (2010) Synthesis and thermal studies of some Metal Oxides (LIA102, AI2O3, FE203) / Nur Shazlinda Muhammad Hanif. (2010) [Student Project] (Unpublished)

Nazali, Mohamad Azzam Aizat (2025) Preparation of activated carbon from coconut shells using mechanical milling method / Mohamad Azzam Aizat Nazali. (2025) [Student Project] (Unpublished)

Razali, Muhammad Hafizi (2024) Functional group of the sodium supported by activated carbon catalyst with mass ratio Na:AC of 1:1, 1:3, 1:4 for biodiesel production / Muhammad Hafizi Razali. (2024) [Student Project] (Unpublished)

Rosly, Muhammad Kasyfil Adha (2022) Effect of catalyst loading in hydrothermal carbonization of cotton waste / Muhammad Kasyfil Adha Rosly. (2022) [Student Project] (Unpublished)

Salleh, Farah Hanis (2024) The effect of Na:AC mass ratio on thermal stability of Na:AC catalyst for biodiesel production / Farah Hanis Salleh. (2024) [Student Project] (Unpublished)

Tajuddin, Nurul Ayuni (2024) Thermal stability of potassium metal supported by activated carbon (K/AC) / Nurul Ayuni Tajuddin. (2024) [Student Project] (Unpublished)

Zahari, Nurul Anis Akmal (2024) Preparation of activated carbon from bamboo using mechanical milling method / Nurul Anis Akmal Zahari. (2024) [Student Project] (Unpublished)

Zahari, Siti Khadijah (2024) The correlation of thermal decomposition behaviour with the functional group composition of na/ac catalyst with different mass ratio of Na:AC for biodiesel production / Siti Khadijah Zahari. (2024) [Student Project] (Unpublished)

Zainal Abidin, Nurnazurah Dhabitah (2019) Characterization of nickel zinc oxide anode materials synthesized by a hydrothermal method / Nurnazurah Dhabitah Zainal Abidin. (2019) [Student Project] (Unpublished)

Research Reports

Abdul Khani, Nur Fadilla (2022) The effect of choline chloride/1,4-butanol deep eutectic solven on the structural, morphological, thermal and electrical properties of PMMA-based electrolytes films / Nur Fadilla Abdul Khani. (2022) [Research Reports] (Submitted)

Zakaria, Nur Qistina Sofia (2022) A review on the production of liquid fuel from copyrolysis of solid wastes / Nur Qistina Sofia Zakaria. (2022) [Research Reports] (Unpublished)