Items where Subject is "Structural analysis. Theory of structures"

Article

Combined effect of steel slag as a partially replaced material for coarse aggregates and water–cement ratio on the chloride resistance of concrete / Fauzi ... [et al.]. (2016) e-Academia Journal, 5 (2). pp. 73-82. ISSN 2289 - 6589

Book Section

Development of fast structural dynamic FE analysis using Krylov subspace model order reduction (KS-MOR) / Norliyati Mohd Amin and Anizahyati Alisibramulisi. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka, p. 25. ISBN 9789671135440

Monograph

Superstructure construction of Adabi’s factory building at Padang Tembak Pengkalan Chepa, Kota Bharu, Kelantan / Nur Aliaa Abd Rahman. (2014) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

The construction method for super structure / Nur Amanina Azemi. (2014) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

Method statement of groundbeam (temporary formwork) at Maktab Rendah Sains Mara (MRSM) Besut, Terengganu / Mohd Safiq Aizat Mat Ropi. (2014) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

Method statement for substructure / Muhammad Aniq Hilmie Mohd Nafi. (2018) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

Installation of structural works at Surau Keda Kg. Che Bima Sg. Jagung, Kedah, Malaysia / Mohd Fakhrul Rizal Mohd Suhaimi. (2016) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

Structure strengthening test / Aina Marina Muszaide. (2018) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

The construction of post-tensioning slab for high rise buildings / Liyana Rosli. (2016) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

Building condition assessment : PWD Quarters Jalan Bruseh / Muhammad Irfan Hakimi Wira. (2016) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

Conference or Workshop Item

An innovative structural insulated panel (SIP) : evaluation of durability properties and structural performance / Muhamad Alias Ghazali Baharudin and Md Azree Othuman Mydin. (2018) In: 3rd Undergraduate Seminar on Built Environment and Technology 2018 (USBET2018), September 2018, Universiti Teknologi Mara Perak Branch.

Thesis

Comparison on the construction and maintenance of flyover / Nor Hafizah Mohamad Nazri. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Effect of gap infront the finger tip on tensile strength of finger joint / Omar Wahijan. (1999) Degree thesis, thesis, Universiti Teknologi MARA, Pulau Pinang.

The effects of non-migrating mid-bar to lateral migration / Zamsalwani Zamri. (2018) PhD thesis, thesis, Universiti Teknologi MARA.

Student Project

Structural and electrical transport of Lа₁₋ₓCaₓMnO₃ with substitution x=0.00, 0.50 and 1.00 / Kamariah Noor Ab Kahar. (2009) [Student Project] (Unpublished)

Repair of ground settlement work / Muhammad Suheil Abdul Kadir. (2014) [Student Project] (Unpublished)

Stress concentration factors on glued joints of timber/ Rosiah Abu Samah. (1995) [Student Project] (Unpublished)

Semi-automatic silicone garlic peeler machine / Siti Nurazila Abu Zaki. (2022) [Student Project] (Submitted)

Smart automated lamp grip / Muhammad Razif Alowi. (2022) [Student Project] (Unpublished)

Structural analysis of an outdoor drying rack / Dinie Zulhusni Arsad. (2022) [Student Project] (Submitted)

Simulation of a flow over a mound-type breakwater of different surface roughness using computational approach / Muhammad Hafiz Haikal Azahar. (2022) [Student Project] (Submitted)

Design and fabrication of sliding platform component of Smart Parcel Drop Box (SPD) / Muhammad Nufaiel Aiman Faiza. (2022) [Student Project] (Unpublished)

Back analysis for pile bearing capacity using Static Load Test result / Nurharnani Hassan. (2005) [Student Project] (Unpublished)

Stress analysis of finger joint subjected to tensile loading / Marzuki Ibrahim. (1998) [Student Project] (Unpublished)

Structure design and analysis of GRP Bedar / Muhammad Adam Idris. (2022) [Student Project] (Unpublished)

Resistance prediction of GRP bedar in calm water using computational fluid dynamic approach / Muhammad Haikal Daniel Jamal. (2022) [Student Project] (Unpublished)

Behaviour of reinfoced concrete beam with silica fume under static loading / Mohd Junaidi Mohamad. (2006) [Student Project] (Unpublished)

Reinforced brick design in accordance to BS 5628 / Kaharuddin Mohamed Ali. (1994) [Student Project] (Unpublished)

A study of surface roughness effect on a mound type breakwater using CWC - an experiment / Muhammad Hanif Mohd Abdillah. (2022) [Student Project] (Submitted)

Effect of geometrical properties of finger joint on the bending strength of timber (profile ii) / Mohd Allias Mohd Hasseri. (2002) [Student Project] (Unpublished)

Propulsion system design of solar boat / Muhammad Nazmi Mohd Nazrie. (2022) [Student Project] (Unpublished)

Production design of an amphibious boat / Rabiatul Adawiah Mohd Razalli. (2022) [Student Project] (Submitted)

Fabrication of miniature foldable storage rack / Mohamad Faiz Mohd Shahrul Munir. (2022) [Student Project] (Unpublished)

Structural design and analysis amphibious boat / Izzul Faiz Farhan Mohd Utama. (2022) [Student Project] (Submitted)

Study on basement and shear wall response by using FEM / Mohd Khairulnizam Mohmmed Haasan. (2007) [Student Project] (Unpublished)

Multi level moving storage rack / Muhamad Hafizudin Muhammad ... [et al.]. (2021) [Student Project] (Submitted)

Payang fiber mould project / Mohammad Yushaiman Habib Muhd Yusoff ... [et al.]. (2021) [Student Project] (Submitted)

Structural design and analysis of solar boat / Muhammad Khairul Nazmi Nazri. (2022) [Student Project] (Unpublished)

Hull design & stability analysis of solar boat / Nik Najmi Nik Min. (2022) [Student Project] (Submitted)

Design and fabrication of aluminium can and plastic bottle crusher / Nur Ain Jannah Noor Heryman. (2022) [Student Project] (Submitted)

Efficiency of glued finger joint / Norizah Omar. (1995) [Student Project] (Unpublished)

Detecting and evaluating surface crack defect of building structure and infrastructure elements using Digital Image Processing approach / Nursyafiqah Razmi. (2018) [Student Project] (Unpublished)

Heavy duty hand truck / Abdul Hadi Rosli ... [et al.]. (2021) [Student Project] (Submitted)

Design and fabricate universal hook for car usage / Sayed Saqif Iman Sayed Safari. (2022) [Student Project] (Submitted)

Behaviour of reinforced concrete beam with metakaolin under static load / Mohammad Tamizi Selimin. (2005) [Student Project] (Unpublished)

Hull design and stability of amphibious boat / Muhammad Syaifulnizam Sudin. (2022) [Student Project] (Unpublished)

Effect of geometrical size on the tensile strength of finger joint / Shamsiah Suib. (2002) [Student Project] (Unpublished)

Manual spikey roller coconut husk peeler / Sharifah Nur Alieya Syed Fakhrul Anwar. (2022) [Student Project] (Submitted)

A study on the response spectral acceleration due to earthquake of 26 December 2004 / Mohammad Fadzli Tajon Aros. (2007) [Student Project] (Unpublished)

Design and fabricate toys box for small toys or Lego / Muhammad Muizzuddin Tajudin. (2022) [Student Project] (Unpublished)

Design and fabrication of gout patient movable device / Wan Ahmad Syamil Asyraf Wan Azman. (2022) [Student Project] (Submitted)

Design and fabrication of minimalzie wall table with storage / Wan Muhammad Jazli Na'im Wan Rozain. (2022) [Student Project] (Submitted)

Development of hydroponic farming system / Wan Muhammad Azam Idrus Wan Shamsuddin. (2022) [Student Project] (Submitted)

Hull design and stability of GRP payang boat / Wan Lutfi Wan Zullkefli. (2022) [Student Project] (Submitted)

Structural performance of corner joint using angle iron in profile steel sheet dry board (PSSDB) wall panel / Mohd Zaffry Zainal Kamrin. (2006) [Student Project] (Unpublished)

Simulation of a flow over a underwater pillar of different surface roughness using computational approach / Harith Asyran Zulkffli. (2022) [Student Project] (Submitted)

Research Reports

Geotechnical finite element analysis of diaphragm wall construction / Fariz Aswan Ahmad Zakwan, Ruqayyah Ismail and Badrul Nizam Ismail. (2011) [Research Reports] (Unpublished)

Technical viability study for commercialisation of steel slag as non-conventional material for the Malaysian concrete industry / Hj Kamran Shavarebi Ali MCIOB and Pro. Madya Zarina Yasmin Hanur Harith MCIOB. (2006) [Research Reports] (Unpublished)

Study of prebored precast pile system - a qualitative approach / Lim Jit Kheng, Ng Wen Kuan and Mohd Farid Ahmad @ Majid. (2006) [Research Reports] (Unpublished)

Steel and polypropylene fiber as a mechanism in concrete properties improvement / Soffian Noor Mat Saliah, Noorsuhada Md. Nor. (2009) [Research Reports] (Unpublished)

The behaviour of concrete filled thin walled steel column under concentric load / Clotilda Petrus and Joe Davylyn Nyuin. (2009) [Research Reports] (Unpublished)

Effects of perforations on load carrying mechanism of perforated hollow sections inspired by nature / Woo Yian Peen and Syahrul Fithry Senin. (2012) [Research Reports] (Unpublished)