Items where Subject is "Polymers. Polymeric composites"

Article

Abd Rahman, Nurfatheen and Kassim Shaari, Norin Zamiah (2020) Enhancement of strength and flexibility of polymer composites by using glycerol: article. (2020) pp. 1-7.

Abu Bakar, Mohd Najmudin Helmi and Ahmad Zailani, Warid Wazien and Zuljar, Zulhaziq Khan and Mohd Apandi, Nazirah and Beddu, Salmia and Agustini, Ni Komang Ayu (2023) Effect of high calcium precursor (HCP) content on bonding strength of geopolymer concrete exposed at different curing temperatures / Mohd Najmudin Helmi Abu Bakar … [et al.]. (2023) Scientific Research Journal, 20 (2): 3. pp. 39-52. ISSN 1675-7009

Ali Husnaini, Siti Rukayyah Izyanni and Vargis, Christina (2018) Flexural properties of fly ash filled (0-80%) polypropylene composite: article. (2018) pp. 1-3.

Azamuddin, Husin and Mahyuddin, Ramli and Cheah, Chee Ban (2019) Mechanical properties of hybrid fibres reinforced polymer modified mortar in promoting sustainable materials in construction / Azamuddin Husin, Mahyuddin Ramli and Cheah Chee Ban. (2019) Malaysian Journal of Sustainable Environment (MySE), 6 (1). pp. 1-22. ISSN 0128-326X

Bahari, Shahril Anuar and Kamlon, Kamrie and Abu Kassim, Masitah (2012) Electrical resistivity, thermal stability and tensile strength of rice husk flour-plastic waste composites / Shahril Anuar Bahari, Kamrie Kamlon and Masitah Abu Kassim. (2012) Scientific Research Journal, 9 (2). pp. 49-64. ISSN 1675-7009

Mohamad Iskandar, Nur Afiqah and Mohd Alauddin, Sakinah (2019) Thermal, photoresponsive and conductivity studies of nitroazobenzene polymer: article. (2019) pp. 1-5.

Mohd Saman, Hamidah and Ibrahim, Azmi and Md. Taib, Yakub and Md. Ja’afar, Mohd. Faizal (2006) Bending and bonding properties of sandwiched polymer concrete composites / Hamidah Mohd Saman ... [et al.]. (2006) Scientific Research Journal, 3 (2). pp. 13-29. ISSN 1675-7009

Mohd Shukry, Nurul Shazviena and Talib, Norhayati (2017) Characterization of hydrogel biochar derived from rice husk and fly ash: article. (2017) pp. 1-7.

Mohd Taib, Norrulhuda and Achim, Norfarisha and Hassan, Zulkafli (2016) Polyhydroxybutyrate for improved oil recovery: a literature review / Norrulhuda Mohd Taib, Norfarisha Achim and Zulkafli Hassan. (2016) Scientific Research Journal, 13 (1). pp. 40-52. ISSN 1675-7009

Yunus, Syarifah and Abdullah, Abdul Hakim and Abdul Halim, Nurul Hayati and Salleh, Zuraidah and Md. Taib, Yakub (2015) Low energy impact on the short kenaf fibre reinforced epoxy composites: effect to the residual strength and modulus / Syarifah Yunus … [et al.]. (2015) Journal of Mechanical Engineering (JMechE), 12 (2). pp. 72-83. ISSN 1823-5514 ; 2550-164X

Book Section

Hashim, Mohd Jafni and Che Haron, Mohd Aminuddin and Abdul Latif, Nur Hannani and Ahmad, Junaiza and Kamarudin Zaki, Norashikin and Abdullah, Zaimatul Aqmar and Muhammed, Suhaimi (2012) Different mould design for the manufacture of composite products / Mohd Jafni Hashim … [et al.]. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka. ISBN 9789671135440 (Submitted)

Conference or Workshop Item

Husin, Azamuddin and Ramli, Mahyuddin and Cheah, Chee Ban (2015) Natural fiber as a fibrous reinforced in polymer modified mortar : a review / Azamuddin Husin, Mahyuddin Ramli and Cheah Chee Ban. (2015) In: Proceedings of Postgraduate Conference on Global Green Issues (Go Green), 7 - 8 October 2015, Dewan Kuliah Al-Khawarizmi, UiTM Cawangan Perak. (Submitted)

Othman, Akbar and Hasan, Mohd Fahrul (2012) Finite element simulation of square and circular polystyrene foam filled subjected to transverse quasi-static loading / Akbar Othman and. (2012) In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

Othman, Akbar and Ismail, Al Emran (2012) Finite element simulation of polygonal rectangular square composite cotton reinforced polyester composites / Akbar Othman and Al Emran Ismail. (2012) In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

Syed Mustafa, Syed Anas and Mohamed, Rahmah and Amerudin, Lily Soraya (2015) Flame retardancy study of recycled polymeric foam filled composite building material / Syed Anas Syed Mustafa, Rahmah Mohamed and Lily Soraya Amerudin. (2015) In: Proceedings of Postgraduate Conference on Global Green Issues (Go Green), 7 - 8 October 2015, Dewan Kuliah Al-Khawarizmi, UiTM Cawangan Perak. (Submitted)

Thesis

Abd Gani, Syed Hazni (2016) Shear and flexural behaviour of reinforced concrete beam externally strengthened with fiber reinforced polymer (FRP) / Syed Hazni Abd Gani. (2016) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Aziz, Ahmad Fairoz (2019) Preparation and characterization of MG30 with antioxidant additive as polymer electrolytes / Ahmad Fairoz Aziz. (2019) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Lahazan, Norazmawati (2009) Preparation and characterization of poly (L-leucine)-1,3-diamino propane (PLL)-lithium iodide (Lil) as solid polymer electrolyte / Norazmawati Lahazan. (2009) Masters thesis, thesis, Universiti Teknologi MARA.

Mamat, Mohd Rizuwan (2018) Design of modular mobile hybrid timber bridge reinforced with carbon fiber reinforced polymer (CFRP) / Mohd Rizuwan Mamat. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Md Shah, Mohd Hazwan (2012) Programmable logic controller polymer mixing tank / Mohd Hazwan Md Shah. (2012) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohamad Iskandar, Nur Afiqah (2019) Thermal, photoresponsive and conductivity studies of nitroazobenzene polymer / Nur Afiqah Mohamad Iskandar. (2019) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohamed, Nur Raihan (2008) High density polyethylene (HDPE)/China clay blend / Nur Raihan Mohamed. (2008) Degree thesis, thesis, Universiti Teknologi MARA.

Saif Mubarak Al-Shukaili, Zeyana (2022) Effects of ionic liquid properties on the synthesis of new flexible acrylates via in situ free radical polymerisation / Zeyana Saif Mubarak Al-Shukaili. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Shapie, Shazli Azrin (2005) Notched strength of fiber-reinforced polymer / Shazli Azrin Shapie. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Student Project

Abd Rahman, Nurfatheen (2020) Enhancement of strength and flexibility of polymer composites by using glycerol. (2020) [Student Project] (Unpublished)

Ali Husnaini, Siti Rukayyah Izyanni (2018) Flexural properties of fly ash (0-80%) filled polypropylene composite. (2018) [Student Project] (Unpublished)

Azlan, Nur Azrin (2018) Tensile strength of bamboo fiber reinforced polymer / Nur Azrin Azlan. (2018) [Student Project] (Unpublished)

Basri, Mohamad Fazrul (2019) Removal of mercury by using thin film composite membrane. (2019) [Student Project] (Unpublished)

Hussain, Arifah (2012) Effect of nano-sized silicon dioxide (Si0₂) on the electrical properties of chitosan based polymer electrolyte / Arifah Hussain. (2012) [Student Project] (Unpublished)

Martinus, Nathan (2017) Mechanical properties investigation on virgin and recycled polypropylene / Nathan Martinus. (2017) [Student Project] (Unpublished)

Mohd Shukry, Nurul Shazviena (2017) Characterization of hydrogel blending biochar derived from rice husk (RH) and fly ash. (2017) [Student Project] (Unpublished)

Saad, Nor Azimah (2019) Potential use of polyethylene as a modifier for asphalt pavement / Nor Azimah Saad. (2019) [Student Project] (Unpublished)

Zulkifli, Faiz Syazwan (2022) Propulsion system design of rigid tube rib / Faiz Syazwan Zulkifli. (2022) [Student Project] (Submitted)