Items where Subject is "Polymers. Polymeric composites"

[up] Up a level
Group by: Creators | Item Type
Jump to: A | B | H | L | M | O | S | Y | Z
Number of items at this level: 37.

A

Abd Gani, Syed Hazni (2016) Shear and flexural behaviour of reinforced concrete beam externally strengthened with fiber reinforced polymer (FRP) / Syed Hazni Abd Gani. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Abd Rahman, Nurfatheen (2020) Enhancement of strength and flexibility of polymer composites by using glycerol. [Student Project] (Unpublished) Digital copy available at UiTM Library Terminal

Abd Rahman, Nurfatheen and Kassim Shaari, Norin Zamiah (2020) Enhancement of strength and flexibility of polymer composites by using glycerol: article. pp. 1-7.

Abdul Kadir, Muhammad Hazim (2026) Biophysicochemical characterization and biofouling growth analysis of polymer-based coating materials on fiber reinforced polymer composites. Masters Thesis , Universiti Teknologi MARA (UiTM) . Digital copy available at UiTM Library Terminal

Abu Bakar, Mohd Najmudin Helmi and Ahmad Zailani, Warid Wazien and Zuljar, Zulhaziq Khan and Mohd Apandi, Nazirah and Beddu, Salmia and Agustini, Ni Komang Ayu (2023) Effect of high calcium precursor (HCP) content on bonding strength of geopolymer concrete exposed at different curing temperatures. Scientific Research Journal , 20 (2) : 3 . pp. 39-52. ISSN 1675-7009.

Ali Husnaini, Siti Rukayyah Izyanni (2018) Flexural properties of fly ash (0-80%) filled polypropylene composite. [Student Project] (Unpublished) Digital copy available at UiTM Library Terminal

Ali Husnaini, Siti Rukayyah Izyanni and Vargis, Christina (2018) Flexural properties of fly ash filled (0-80%) polypropylene composite: article. pp. 1-3.

Azamuddin, Husin and Mahyuddin, Ramli and Cheah, Chee Ban (2019) Mechanical properties of hybrid fibres reinforced polymer modified mortar in promoting sustainable materials in construction / Azamuddin Husin, Mahyuddin Ramli and Cheah Chee Ban. Malaysian Journal of Sustainable Environment (MySE) , 6 (1) . pp. 1-22. ISSN 0128-326X.

Aziz, Ahmad Fairoz (2019) Preparation and characterization of MG30 with antioxidant additive as polymer electrolytes / Ahmad Fairoz Aziz. PhD Thesis , Universiti Teknologi MARA (UiTM) . Digital copy available at UiTM Library Terminal Physical copy available on shelf

Azlan, Nur Azrin (2018) Tensile strength of bamboo fiber reinforced polymer / Nur Azrin Azlan. [Student Project] (Unpublished) Digital copy available at UiTM Library Terminal

B

Bahari, Shahril Anuar and Kamlon, Kamrie and Abu Kassim, Masitah (2012) Electrical resistivity, thermal stability and tensile strength of rice husk flour-plastic waste composites. Scientific Research Journal , 9 (2) . pp. 49-64. ISSN 1675-7009.

Basri, Mohamad Fazrul (2019) Removal of mercury by using thin film composite membrane. [Student Project] (Unpublished) Digital copy available at UiTM Library Terminal

H

Hashim, Mohd Jafni and Che Haron, Mohd Aminuddin and Abdul Latif, Nur Hannani and Ahmad, Junaiza and Kamarudin Zaki, Norashikin and Abdullah, Zaimatul Aqmar and Muhammed, Suhaimi (2012) Different mould design for the manufacture of composite products / Mohd Jafni Hashim … [et al.]. In: RIID 2012: Innovation For Sustainable Growth.. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka , Alor Gajah, Melaka . ISBN 9789671135440. (Submitted)

Husin, Azamuddin and Ramli, Mahyuddin and Cheah, Chee Ban (2015) Natural fiber as a fibrous reinforced in polymer modified mortar : a review / Azamuddin Husin, Mahyuddin Ramli and Cheah Chee Ban. In: Proceedings of Postgraduate Conference on Global Green Issues (Go Green) , 7 - 8 October 2015 , Dewan Kuliah Al-Khawarizmi, UiTM Cawangan Perak . (Submitted)

Hussain, Arifah (2012) Effect of nano-sized silicon dioxide (Si0₂) on the electrical properties of chitosan based polymer electrolyte / Arifah Hussain. [Student Project] (Unpublished) Physical copy available on shelf

L

Lahazan, Norazmawati (2009) Preparation and characterization of poly (L-leucine)-1,3-diamino propane (PLL)-lithium iodide (Lil) as solid polymer electrolyte / Norazmawati Lahazan. Masters Thesis , Universiti Teknologi MARA . Digital copy available at UiTM Library Terminal Physical copy available on shelf

M

Maliaman, Nur Najiha (2026) The effects of overoxidation on the morphological and electrical properties of polyaniline (PANI) – based solid polymer electrolyte (SPE). Masters Thesis , Universiti Teknologi MARA (UiTM) . Digital copy available at UiTM Library Terminal

Mamat, Mohd Rizuwan (2018) Design of modular mobile hybrid timber bridge reinforced with carbon fiber reinforced polymer (CFRP) / Mohd Rizuwan Mamat. Masters Thesis , Universiti Teknologi MARA (UiTM) . Digital copy available at UiTM Library Terminal Digital copy available through PERMATA

Martinus, Nathan (2017) Mechanical properties investigation on virgin and recycled polypropylene / Nathan Martinus. [Student Project] (Unpublished) Physical copy available on shelf

Md Shah, Mohd Hazwan (2012) Programmable logic controller polymer mixing tank / Mohd Hazwan Md Shah. Degree Thesis , Universiti Teknologi MARA (UiTM) . Digital copy available at UiTM Library Terminal Digital copy available through PERMATA

Mohamad Iskandar, Nur Afiqah (2019) Thermal, photoresponsive and conductivity studies of nitroazobenzene polymer / Nur Afiqah Mohamad Iskandar. Degree Thesis , Universiti Teknologi MARA (UiTM) . Digital copy available at UiTM Library Terminal

Mohamad Iskandar, Nur Afiqah and Mohd Alauddin, Sakinah (2019) Thermal, photoresponsive and conductivity studies of nitroazobenzene polymer: article. pp. 1-5.

Mohamed, Mohamed Abdirahman and Jaafar, Jamiluddin and Ibrahim, Muhammad Akmal Afiq and M. Yusup, Eliza and Siregar, Januar Parlaungan and Osman, Shahrul Azmir and Cionita, Tezara and Fitriyana, Deni Fajar and Oumer, Ahmed Nurye (2025) Experimental investigation on the influence of processing pressure on mechanical properties of pineapple leaf fiber reinforced tapioca biopolymer composites. Journal of Mechanical Engineering (JMechE) , 14 (SI) : 5 . pp. 82-94. ISSN e-ISSN: 2550-164X.

Mohamed, Nur Raihan (2008) High density polyethylene (HDPE)/China clay blend / Nur Raihan Mohamed. Degree Thesis , Universiti Teknologi MARA . Physical copy available on shelf

Mohd Saman, Hamidah and Ibrahim, Azmi and Md. Taib, Yakub and Md. Ja’afar, Mohd. Faizal (2006) Bending and bonding properties of sandwiched polymer concrete composites. Scientific Research Journal , 3 (2) . pp. 13-29. ISSN 1675-7009.

Mohd Shukry, Nurul Shazviena (2017) Characterization of hydrogel blending biochar derived from rice husk (RH) and fly ash. [Student Project] (Unpublished) Digital copy available at UiTM Library Terminal

Mohd Shukry, Nurul Shazviena and Talib, Norhayati (2017) Characterization of hydrogel biochar derived from rice husk and fly ash: article. pp. 1-7.

Mohd Taib, Norrulhuda and Achim, Norfarisha and Hassan, Zulkafli (2016) Polyhydroxybutyrate for improved oil recovery: a literature review. Scientific Research Journal , 13 (1) . pp. 40-52. ISSN 1675-7009.

Muslim, Mohamad Asrofi and Jumahat, Aidah and Jaafar, Mohd Azrul and Abdullah, Shahrul Azam (2023) The effect of micro granite on barcol hardness, flexural and compression strength of basalt and glass fiber reinforced composites using industrial polyester. APS Proceedings , 8 (1) : 12 . pp. 74-83. ISSN 003428568-X.

O

Othman, Akbar and Hasan, Mohd Fahrul (2012) Finite element simulation of square and circular polystyrene foam filled subjected to transverse quasi-static loading / Akbar Othman and. In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012) , 16-17 April 2012 , Universiti Teknologi MARA Cawangan Perak .

Othman, Akbar and Ismail, Al Emran (2012) Finite element simulation of polygonal rectangular square composite cotton reinforced polyester composites / Akbar Othman and Al Emran Ismail. In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012) , 16-17 April 2012 , Universiti Teknologi MARA Cawangan Perak .

S

Saad, Nor Azimah (2019) Potential use of polyethylene as a modifier for asphalt pavement / Nor Azimah Saad. [Student Project] (Unpublished)

Saif Mubarak Al-Shukaili, Zeyana (2022) Effects of ionic liquid properties on the synthesis of new flexible acrylates via in situ free radical polymerisation / Zeyana Saif Mubarak Al-Shukaili. PhD Thesis , Universiti Teknologi MARA (UiTM) .

Shapie, Shazli Azrin (2005) Notched strength of fiber-reinforced polymer / Shazli Azrin Shapie. Degree Thesis , Universiti Teknologi MARA (UiTM) . Physical copy available on shelf

Syed Mustafa, Syed Anas and Mohamed, Rahmah and Amerudin, Lily Soraya (2015) Flame retardancy study of recycled polymeric foam filled composite building material / Syed Anas Syed Mustafa, Rahmah Mohamed and Lily Soraya Amerudin. In: Proceedings of Postgraduate Conference on Global Green Issues (Go Green) , 7 - 8 October 2015 , Dewan Kuliah Al-Khawarizmi, UiTM Cawangan Perak . (Submitted)

Y

Yunus, Syarifah and Abdullah, Abdul Hakim and Abdul Halim, Nurul Hayati and Salleh, Zuraidah and Md. Taib, Yakub (2015) Low energy impact on the short kenaf fibre reinforced epoxy composites: effect to the residual strength and modulus / Syarifah Yunus … [et al.]. Journal of Mechanical Engineering (JMechE) , 12 (2) . pp. 72-83. ISSN 1823-5514 ; 2550-164X.

Z

Zulkifli, Faiz Syazwan (2022) Propulsion system design of rigid tube rib / Faiz Syazwan Zulkifli. [Student Project] (Submitted) Digital copy available at UiTM Library Terminal

This list was generated on Tue Oct 20 10:39:49 2026 UTC.