Items where Subject is "Physical properties"

Article

Ahmad, Ahsana Aqilah and A. Ghani, Jaharah and Che Haron, Che Hassan (2023) The influence of cutting parameter under sustainable machining approaches on surface roughness of AISI 4340 / Ahsana Aqilah Ahmad, Jaharah A. Ghani and Che Hassan Che Haron. (2023) Journal of Mechanical Engineering (JMechE), 12 (1): 4. pp. 63-80. ISSN 1823-5514 ; 2550-164X

Majok, Abdusalam and Mohd Alauddin, Sakinah (2019) Thermal, photoresponsive and conducting properties of polyoxyazobenzene hexylmethacrylate homopolymers and terpolymers: article. (2019) pp. 1-5.

Mohammed Manshor, Norasmah and Abdul Karim, Adibah Ayuni and Ahmad Fuad, Nur Nabilah Husna and Yahya, Asdarina (2024) Solubility, mechanical and thermal properties of cassava starch-chitosan film incorporated with red cabbage extract / Norasmah Mohammed Manshor ... [et al.]. (2024) Scientific Research Journal, 21 (2): 3. pp. 43-55. ISSN 1675-7009

Mohd Salehen, Muhammad Naziem and Mohd Apandi, Nazirah and Tengku Nasharuddin, Tengku Nur Alyani (2024) Optimization of phase change materials as backfill materials for underground cable / Muhammad Naziem Mohd Salehen, Nazirah Mohd Apandi and Tengku Nur Alyani Tengku Nasharuddin. (2024) Scientific Research Journal, 21 (2): 7. pp. 119-134. ISSN 1675-7009

Mohd Shaufe Aminuddin, Nur Nadila and Nik Him, Nik Raikhan (2017) Microbial influenced accelerated low water corrosion (ALWC): species isolation and identification: article / Nur Nadila Mohd Shaufe Aminuddin, Dr. Nik Raikhan Nik Him. (2017) pp. 1-7.

Thesis

Ahmad, Zahari (2001) Effect of holes for different layer of composite material (epoxy/polypropylene laminates) / Zahari Ahmad. (2001) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Fazin, Mas Izzati (2022) Rectangular slot array on biomass hollow pyramidal microwave absorber / Mas Izzati Fazin. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Md. Nor, Muhammad Syafiq (2022) The aqueous environmental effects on Co-Ni-Fe coated stainless steel bolts / Muhammad Syafiq Md.Nor. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Shaufe Aminuddin, Nur Nadila (2017) Microbial influenced accelerated low water corrosion (ALWC): species isolation and identification / Nur Nadila Mohd Shaufe Aminuddin. (2017) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Rajhan, Nurul Husna (2017) Physical and mechanical properties of magnetic iron filled rubber composites / Nurul Husna Rajhan. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Rosli, Nur Dayana Khairunnisa (2014) Flow fields analysis of thermophoretics hydromagnetic third-grade non-newtonian nanofluids through porous cylinder with heat generation or absorption. (2014) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Saleh, Ani Maslina (2020) Development of sustainable bricks utilising solid waste fly ash and paint sludge / Ani Maslina Saleh. (2020) PhD thesis, thesis, Universiti Teknologi MARA.

Student Project

Abdullah, Fatin Nabilah (2017) A literature review on local patent applications for corrosion inhibitors development used in the protection of ferrous and non-ferrous types of surfaces. (2017) [Student Project] (Unpublished)

Bosuin, Scott Simon (2005) A study on compressive strength of concrete with glass aggregate / Scott Simon Bosuin. (2005) [Student Project] (Unpublished)

Che Ismail, Mohd Suhaimi (2009) Kajian kesesuaian penggunaan bahan aluminium sebagai bahan binaan ringan dalam pembinaan / Mohd Suhaimi Che Ismail. (2009) [Student Project] (Unpublished)

Che Lah, Ayurahani (2006) Study on laminated composite material using numerical approach / Ayurahani Che Lah. (2006) [Student Project] (Unpublished)

Dolian, Evllynn Suezelynn (2019) Ceiba Pentandra seed based activated carbon for synthetic wastewater (Copper, Cu (ii)) treatment / Evllynn Suezelynn Dolian. (2019) [Student Project] (Unpublished)

Jamaludin, Muhammad Nasri (2016) Optimization of copper based powder metallurgy brake friction materials / Muhammad Nasri Jamaludin. (2016) [Student Project] (Unpublished)

Majok, Abdusalam (2019) Thermal, photoresponsive and conducting properties of Polyoxyazobenzene hexylmethacrylate homopolymers and terpolymers. (2019) [Student Project] (Unpublished)

Md Yunos, Ahmad Zakib and Harun, Azmi (1994) Study of thermal behaviour of kaolin clay using dilatometer / Ahmad Zakib Md Yunos and Azmi Harun. (1994) [Student Project] (Unpublished)

Mohamad, Mustafa (1998) Fracture mechanics and its application to wood / Mustafa Mohamad. (1998) [Student Project] (Unpublished)

Mohd Ghazali, Haziq Shazwan (2022) Study of hardness on the mild steel in various cooling medium / Haziq Shazwan Mohd Ghazali. (2022) [Student Project] (Submitted)

Mohd Jaya, Alif Akhmizan (2019) Crushed coconut shells as an additive for stabilization treatment of subgrade materials / Alif Akhmizan Mohd Jaya. (2019) [Student Project] (Unpublished)

Mohd Sabri, Muhammad Adib (2017) Wear and adhesive performance investigation on Co-Ni-Fe coated mild steel / Muhammad Adib Mohd Sabri. (2017) [Student Project] (Unpublished)

Mohd Utama, Izzul Faiz Farhan (2022) Structural design and analysis amphibious boat / Izzul Faiz Farhan Mohd Utama. (2022) [Student Project] (Submitted)

Mokhtar, Mohd Idham (2006) A laboratory study on laterite soil as granular replacement material in embankment works / Mohd Idham Mokhtar. (2006) [Student Project] (Unpublished)

Zakaria, Nurshuhada (2022) Mechanical and physical properties of brass vs aluminium / Nurshuhada Zakaria. (2022) [Student Project] (Submitted)

Research Reports

Abdullah, Asiah and Samsuri, Azemi (2005) Tack behaviour of unvulcanized and vulcanized natural rubber latex films / Asiah Abdullah and Azemi Samsuri. (2005) [Research Reports] (Submitted)

Ismail, Mohd Fauzi and Hamat, Muniroh and Mohamed Nor, Rizal (2007) Effect of surface texture towards product performance / Mohd Fauzi Ismail, Muniroh Hamat and Rizal Mohamed Nor. (2007) [Research Reports] (Unpublished)

Lim, Teong Yeong and Lim, Juinn Hsuh and Othman, Muhamad (2008) A design of machine vision system for the automatic surface profiling measurement using shadow moire technique / Lim Teong Yeong, Lim Juinn Hsuh and Muhamad Othman. (2008) [Research Reports] (Unpublished)