Items where Subject is "Physical properties"

A

Abdullah, Asiah and Samsuri, Azemi (2005) Tack behaviour of unvulcanized and vulcanized natural rubber latex films / Asiah Abdullah and Azemi Samsuri. [Research Report] Institute of Research, Development and Commercialization, Universiti Teknologi MARA. (Submitted)

Abdullah, Fatin Nabilah (2017) A literature review on local patent applications for corrosion inhibitors development used in the protection of ferrous and non-ferrous types of surfaces. [Student Project] (Unpublished)

Ahmad, Ahsana Aqilah and A. Ghani, Jaharah and Che Haron, Che Hassan (2023) The influence of cutting parameter under sustainable machining approaches on surface roughness of AISI 4340 / Ahsana Aqilah Ahmad, Jaharah A. Ghani and Che Hassan Che Haron. Journal of Mechanical Engineering (JMechE) , 12 (1) : 4 . pp. 63-80. ISSN 1823-5514 ; 2550-164X.

Ahmad, Zahari (2001) Effect of holes for different layer of composite material (epoxy/polypropylene laminates) / Zahari Ahmad. Degree Thesis , Universiti Teknologi MARA (UiTM) .

B

Bosuin, Scott Simon (2005) A study on compressive strength of concrete with glass aggregate / Scott Simon Bosuin. [Student Project] (Unpublished)

C

Che Ismail, Mohd Suhaimi (2009) Kajian kesesuaian penggunaan bahan aluminium sebagai bahan binaan ringan dalam pembinaan / Mohd Suhaimi Che Ismail. [Student Project] (Unpublished)

Che Lah, Ayurahani (2006) Study on laminated composite material using numerical approach / Ayurahani Che Lah. [Student Project] (Unpublished)

D

Dolian, Evllynn Suezelynn (2019) Ceiba Pentandra seed based activated carbon for synthetic wastewater (Copper, Cu (ii)) treatment / Evllynn Suezelynn Dolian. [Student Project] (Unpublished)

F

Fazin, Mas Izzati (2022) Rectangular slot array on biomass hollow pyramidal microwave absorber / Mas Izzati Fazin. PhD Thesis , Universiti Teknologi MARA (UiTM) .

H

Hadi Hassan, Muhammad Nazhan and Ishak, Noor Rizallinda (2025) Air-sensor concrete poker vibrator. In: E-proceedings of international tinker innovation & entrepreneurship challenge (i-TIEC 2025).. International Tinker Innovation & Entrepreneurship Challenge (2nd) . Universiti Teknologi MARA Cawangan Johor Kampus Pasir Gudang , Universiti Teknologi MARA, Johor , pp. 221-224 . ISBN 978-967-0033-34-1.

I

Ismail, Mohd Fauzi and Hamat, Muniroh and Mohamed Nor, Rizal (2007) Effect of surface texture towards product performance / Mohd Fauzi Ismail, Muniroh Hamat and Rizal Mohamed Nor. [Research Report] (Unpublished)

J

Jamaludin, Muhammad Nasri (2016) Optimization of copper based powder metallurgy brake friction materials / Muhammad Nasri Jamaludin. [Student Project] (Unpublished)

L

Lim, Teong Yeong and Lim, Juinn Hsuh and Othman, Muhamad (2008) A design of machine vision system for the automatic surface profiling measurement using shadow moire technique / Lim Teong Yeong, Lim Juinn Hsuh and Muhamad Othman. [Research Report] (Unpublished)

M

Majok, Abdusalam (2019) Thermal, photoresponsive and conducting properties of Polyoxyazobenzene hexylmethacrylate homopolymers and terpolymers. [Student Project] (Unpublished)

Majok, Abdusalam and Mohd Alauddin, Sakinah (2019) Thermal, photoresponsive and conducting properties of polyoxyazobenzene hexylmethacrylate homopolymers and terpolymers: article. pp. 1-5.

Md Yunos, Ahmad Zakib and Harun, Azmi (1994) Study of thermal behaviour of kaolin clay using dilatometer / Ahmad Zakib Md Yunos and Azmi Harun. [Student Project] (Unpublished)

Md. Nor, Muhammad Syafiq (2022) The aqueous environmental effects on Co-Ni-Fe coated stainless steel bolts / Muhammad Syafiq Md.Nor. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Mohamad, Mustafa (1998) Fracture mechanics and its application to wood / Mustafa Mohamad. [Student Project] (Unpublished)

Mohammed Manshor, Norasmah and Abdul Karim, Adibah Ayuni and Ahmad Fuad, Nur Nabilah Husna and Yahya, Asdarina (2024) Solubility, mechanical and thermal properties of cassava starch-chitosan film incorporated with red cabbage extract. Scientific Research Journal , 21 (2) : 3 . pp. 43-55. ISSN 1675-7009.

Mohd Ghazali, Haziq Shazwan (2022) Study of hardness on the mild steel in various cooling medium / Haziq Shazwan Mohd Ghazali. [Student Project] (Submitted)

Mohd Jaya, Alif Akhmizan (2019) Crushed coconut shells as an additive for stabilization treatment of subgrade materials / Alif Akhmizan Mohd Jaya. [Student Project] (Unpublished)

Mohd Sabri, Muhammad Adib (2017) Wear and adhesive performance investigation on Co-Ni-Fe coated mild steel / Muhammad Adib Mohd Sabri. [Student Project] (Unpublished)

Mohd Salehen, Muhammad Naziem and Mohd Apandi, Nazirah and Tengku Nasharuddin, Tengku Nur Alyani (2024) Optimization of phase change materials as backfill materials for underground cable. Scientific Research Journal , 21 (2) : 7 . pp. 119-134. ISSN 1675-7009.

Mohd Shaufe Aminuddin, Nur Nadila (2017) Microbial influenced accelerated low water corrosion (ALWC): species isolation and identification / Nur Nadila Mohd Shaufe Aminuddin. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Mohd Shaufe Aminuddin, Nur Nadila and Nik Him, Nik Raikhan (2017) Microbial influenced accelerated low water corrosion (ALWC): species isolation and identification: article / Nur Nadila Mohd Shaufe Aminuddin, Dr. Nik Raikhan Nik Him. pp. 1-7.

Mohd Utama, Izzul Faiz Farhan (2022) Structural design and analysis amphibious boat / Izzul Faiz Farhan Mohd Utama. [Student Project] (Submitted)

Mokhtar, Mohd Idham (2006) A laboratory study on laterite soil as granular replacement material in embankment works / Mohd Idham Mokhtar. [Student Project] (Unpublished)

R

Rajhan, Nurul Husna (2017) Physical and mechanical properties of magnetic iron filled rubber composites / Nurul Husna Rajhan. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Rosli, Nur Dayana Khairunnisa (2014) Flow fields analysis of thermophoretics hydromagnetic third-grade non-newtonian nanofluids through porous cylinder with heat generation or absorption. Masters Thesis , Universiti Teknologi MARA (UiTM) .

S

Saleh, Ani Maslina (2020) Development of sustainable bricks utilising solid waste fly ash and paint sludge / Ani Maslina Saleh. PhD Thesis , Universiti Teknologi MARA .

Z

Zakaria, Nurshuhada (2022) Mechanical and physical properties of brass vs aluminium / Nurshuhada Zakaria. [Student Project] (Submitted)