Items where Subject is "Geometry. Trigonometry. Topology"

A

Abd Ghani, Muhammad Asyraf (2021) A content-based movie recommendation system using cosine similarity measure / Muhammad Asyraf Abd Ghani. (2021) Degree thesis, thesis, Universiti Teknologi MARA, Terengganu.

Abu Bakar, Nor Hasalina (1995) Circuit design for multiple-order system with fractional power using singularity function approach / Nor Hasalina Abu Bakar. (1995) Advanced Diploma thesis, thesis, Universiti Teknologi MARA (UiTM).

Alias, Fadzilawani Astifar and Mohamed, Siti Asmah and Hamat, Muniroh and Shamsuddin, Maisurah (2020) Teknik mudah menghafal dan mengingati pembezaan fungsi trigonometri dengan kaedah PERMATA / Fadzilawani Astifar Alias ... [et al.]. (2020) Teaching and Learning in Higher Education (TLHE), 1. pp. 7-14. ISSN 9789670841861

Aziz, Adzhari and Ibrahim, Aiza Asmad (1999) Calibration of measuring equipment as per international standards / Adzhari Aziz and Aiza Asmad Ibrahim. (1999) [Student Project] (Unpublished)

Azmi, Muhammad Fazrul and Muhd Jelaini, Amin Iman and Jafari, Aniza Izati (2019) Upper bound of second Hankel determinant for subclass of close-to-convex functions / Muhammad Fazrul Azmi... [et al.]. (2019) [Student Project] (Unpublished)

C

Che Ali, Mohd Alimin (2002) Analysis of lightweight box structure / Mohd Alimin Che Ali. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

I

Ismail, Idrus (1983) Konsep rekacorak geometrik dalam Islam dan hubungannya dengan Allah / Idrus Ismail. (1983) [Student Project] (Unpublished)

Ismail, Nurhasanah (2018) Performance study of modified designs of a ranque-hilsch vortex tube using geometry parameters and helical tapes in the hot tube / Nurhasanah Ismail. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

J

Johnny, Bryn Darren and Norisham, Muhammad Firdaus and Yusaini, Muhammad Syafiq Najmie (2022) Coefficient inequalities of certain class of univalent functions / Bryn Darren Johnny, Muhammad Firdaus Norisham and Muhammad Syafiq Najmie Yusaini. (2022) [Student Project] (Unpublished)

Jusoh, Nordianah and Ghazali, Noorzalianee and Jamaluddin, Siti Hafawati and Muhamad, Siti Nor Nadrah and Wan Ibrahim, Wan Juliyana and Md. Ali, Jamaludin and Wan Yaacob, Wan Mohd Zulkifle (2017) Volume of hill estimation for engineering earth work / Nordianah Jusoh ... [et al.]. (2017) Journal of Computing Research and Innovation (JCRINN), 2 (1): 11. pp. 69-76. ISSN 2600-8793

K

Khairulfahmi, Nur’Afaf Zahiah and Mohamad Fadzil, Mohamad Najib and Ahmad Dahlan, Zaki (2023) The use of Trapezoidal Rule to approximate the volume of clods of soil at Gunung Perlis Taman Negeri Perlis / Nur’Afaf Zahiah Khairulfahmi, Mohamad Najib Mohamad Fadzil and Zaki Ahmad Dahlan. (2023) In: Research Exhibition in Mathematics and Computer Sciences (REMACS 5.0). College of Computing, Informatics and Media, UiTM Perlis, pp. 135-136. ISBN 978-629-97934-0-3

M

Mat Ariffin, Nur Adrianna (2020) Rubber leaf blight disease detection using multispectral sensor in rural and urban area / Nur Adrianna Mat Ariffin. (2020) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mat Dzulkifli, Siti Aishah (2019) Optimizing fire stations' in Perlis by using Voronoi Diagram / Siti Aishah Mat Dzulkifli. (2019) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Md. Zulkiflie, Muhammad Faris and Mohamad Salleh, Muhammad Fakhrullah (2015) Distance measurement by using ultrasonic sensor / Muhammad Faris Md. Zulkiflie & Muhammad Fakhrullah Mohamad Salleh. (2015) [Student Project] (Unpublished)

Mohamad, Nadzira Amanina and Abdul Wahab, Noor Aleeza and Shuhaimee, Amy Aizaitul Aina (2018) Second hankel determinant of certain subclasses of analytic Bi-Univalent functions subordinate to chebyshev polynomials / Nadzira Amanina Mohamad, Noor Aleeza Abdul Wahab and Amy Aizaitul Aina Shuhaimee. (2018) [Student Project] (Unpublished)

Mohamad, Wan Nor Azam (2002) Analysis of lightweight box structure / Wan Nor Azam Mohamad. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohamad Sukri, Nursyazni and Razali, Noor Khairiah (2012) Extended cubic uniform B-spline and sweep surface in three dimensional graphic objects / Nursyazni Mohamad Sukri and Noor Khairiah Razali. (2012) [Research Reports] (Unpublished)

Mohamed, Siti Asmah and Alias, Fadzilawani Astifar and Hamat, Muniroh and Shamsuddin, Maisurah (2020) Miskonsepsi pelajar dalam topik trigonometri / Siti Asmah Mohamed... [et al.]. (2020) Teaching and Learning in Higher Education (TLHE), 1. pp. 131-139. ISSN 978-967-0841-86-1

Mohd Bazli, Farah Dalila (2021) Outline extraction and identification of corner points for a two-dimensional image / Farah Dalila Mohd Bazli. (2021) [Student Project] (Unpublished)

Mohd Razali, Ainaa Farhanah (2022) Feature identification in a real surface metrology analysis by means of Double Iteration Sobel (DIS) / Ainaa Farhanah Mohd Razali. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Rodi, Muhamad Hafizudin and Mohamad Fauzi, Mohamad Naqib and Anuar, Fatin Norsyabilla (2019) A comparative study between extent analysis method and geometric mean method in fuzzy analytic iderarchy process (FAHP): a case study of selection of best student in a secondary school / Muhamad Hafizudin Mohd Rodi, Mohamad Naqib Mohamad Fauzi and Fatin Norsyabilla Anuar. (2019) [Student Project] (Unpublished)

N

Narmanov, A.Y. and Ganiev, I. (2015) The geometry of the accessible sets of vector fields / A.Y. Narmanov and I. Ganiev. (2015) In: International Conference on Computing, Mathematics and Statistics (iCMS2015).

Nayan, Siti Norhazwani (2021) The construction of a curve by using Quadratic Bézier and Cubic Bézier / Siti Norhazwani Nayan. (2021) [Research Reports] (Unpublished)

Nayan, Siti Norhazwani (2021) The construction of a curve by using quadratic bézier and cubic bézier / Siti Norhazwani Nayan. (2021) [Student Project] (Unpublished)

R

Raseli, Siti Sarah and Mohd Khusairy Faisal, Nur Ain and Mahat, Norpah (2022) The construction of cubic Bezier curve / Siti Sarah Raseli, Nur Ain Mohd Khusairy Faisal and Norpah Mahat. (2022) Journal of Computing Research and Innovation (JCRINN), 7 (2): 12. pp. 111-120. ISSN 2600-8793

Razali, Noor Khairiah and Mohamad Sukri, Nursyazni (2012) Designing three dimensional graphic objects using the polynomial of trigonometric curves with a shape parameter and the sweep surface head of project / Noor Khairiah Razali and Nursyazni Mohamad Sukri. (2012) [Research Reports] (Unpublished)

Razali, Noor Khairiah and Mohd Fauzi, Athirah Hanani (2024) Utilizing trigonometric Bézier curves for reconstructing Arabic calligraphy: interpolating quasi-quartic and quasi-quintic curves / Noor Khairiah Razali and Athirah Hanani Mohd Fauzi. (2024) Journal of Computing Research and Innovation (JCRINN), 9 (2): 10. pp. 121-129. ISSN 2600-8793

Rohin, Mohd Hafidz Khalili (2013) Performance evaluation Manet test bed on linear topology / Mohd Hafidz Khalili Rohin. (2013) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Roslee, Nurul Irafatin (2020) Assesment of oidium disease on rubber leaves by drone-based multispectral image / Nurul Irafatin Roslee. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

S

Saffian, Norhafizah (2017) Facial expression type recognition using K-Nearest Neighbor algorithm / Norhafizah Saffian. (2017) Degree thesis, thesis, Universiti Teknologi MARA, Terengganu.

Sahbudin @ Sahabudin, Hamizah and Mohd Yunus, Nurul Afiqah and Mohd Nasir, Syaza Aida (2018) Designing a front car by using Bezier Curves and Lagrange Interpolation in Computer-Aided Geometric Design (CAGD) / Hamizah Sahbudin @ Sahabudin, Nurul Afiqah Mohd Yunus and Syaza Aida Mohd Nasir. (2018) [Student Project] (Unpublished)

W

Wan Muhammad Shafawi, Wan Nur Ashilah Shamihah (2022) The construction of quartic Bezier curve with 1 C continuity / Wan Nur Ashilah Shamihah Wan Muhammad Shafawi. (2022) [Student Project] (Submitted)

Y

Yunan, Amsar (2020) Analysis of flood prone areas in nagan raya regency Aceh province / Amsar Yunan. (2020) Malaysian Journal of Computing (MJoC), 5 (1). pp. 414-432. ISSN 2600-8238

Yusof, Hasnah and Wan Yusoff, Wan Rolini and Jamal, Masita (2006) Evaluating the performances of Dice, Jaccard, Overlap, and Cosine coefficients in automated marking of algebraic equations / Hasnah Yusof, Wan Rolini Wan Yusoff and Masita Jamal. (2006) [Research Reports] (Unpublished)