Articles in Journal Journal of Mechanical Engineering (JMechE) for Year 2017, Vol SI 3, Issues 2

Zainudin, Mahfuzah and Ismail, Muhammad Hussain (2017) Characteristic Of The YTTRIA Stabilized Zirconia (YSZ) for Ceramic Injection Moulding by Using Palm Stearin as a Primary Binder / Mahfuzah Zainudin and Muhammad Hussain Ismail. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 133-143. ISSN 18235514.

Ukwueze, Bonaventure Emeka and Sulong, Abu Bakar and Muhamad, Norhamidi and Sajuri, Zainuddin (2017) The Characterization and Rheological Investigation of Materials for Powder Injection Moulding / Ukwueze Bonaventure Emeka...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 97-107. ISSN 18235514.

Abdullah, Haslina and Ramli, Rizauddin and Abd Wahab, Dzuraidah and Abu Qudeiri, Jaber (2017) Comparative Study of Non-Productive Tool Path Length for Contour Parallel Machining / Haslina Abdullah...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 211-220. ISSN 18235514.

Md Tahir, Nurul Hidayah and Rizal, Muhammad and Wan Mansor, Wan Nuha and A. Ghani, Jaharah and Nuawi, Mohd Zaki and Che Haron, Che Hassan (2017) The Correlation Between Tool Wear and Vibration Signals from Piezoelectric in End Milling of AISI P20+NI / Nurul Hidayah Md Tahir...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 49-62. ISSN 18235514.

Rajendran Royan, Nishata Royan and Sulong, Abu Bakar and Mohd, Nor Yuliana Yuhana and Abdul Ghani, Mohd Hafizuddin and Ahmad, Sahrim (2017) Effect UV/O3 Modified Rice Husk on the Mechanical Properties of Recycle HDPE Rice Husk Composite / Nishata Royan Rajendran Royan ...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 13-22. ISSN 18235514.

Wan Zulkifli, Wan Amirul Shafiz and Mohd Rosli, Zulkifli and Mohamad Juoi, Jariah and Yusuf, Yusliza (2017) Effect of Nitriding Temperature and Nitriding Time on MgAZ91D Alloy / Wan Amirul Shafiz Wan Zulkifli...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 177-184. ISSN 18235514.

Ahmad Hamidi, Mohd Faizul Farhan and Wan Harun, Wan Sharuzi and Che Ghani, Saiful Anwar and Osada, Toshiya (2017) Effect of Sintering Parameters on Physical Properties of SS 316L Alloy Compact / Mohd Faizul Farhan Ahmad Hamidi..[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 123-131. ISSN 18235514.

Mohamad Samsuddin, Noorazizi and Izamshah, Raja and Kasim, Mohd Shahir and Che Haron, Che Hassan (2017) Evaluation of Hole Performance and Force Magnitude on Drilling Parameter for Orthopaedic Surgical Bone Drilling / Noorazizi Mohamad Samsuddin ...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 37-47. ISSN 18235514.

Yaakob, Nurul Afizan and Ganesan, Hema Nanthini and Harun, Nurul Hatiqah and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir (2017) Influence of Grinding Parameters on Surface Finish of Inconel 718 / Nurul Afizan Yaakob...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 199-209. ISSN 18235514.

Yusuf, Yusliza and Jaafar, Abdul Rahim and Omar, Noririnah and Azlan, Umar Al Amani (2017) The Influence of Heat Treatment on the Microstructure and Hardness Properties of Ti6Al4V and MgAZ91D Alloys / Yusliza Yusuf...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 167-176. ISSN 18235514.

Aishah Majid, Siti Najatul and Alkahari, Mohd Rizal and Ramli, Faiz Redza and Maidin, Shajahan and Tan, Chee Fai and Sudin, Mohd Nizam (2017) Influence of Integrated Pressing during Fused Filament Fabrication on Tensile Strength and Porosity / Siti Najatul Aishah Majid...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 185-197. ISSN 18235514.

Suresh, Sangeeth and Abdul Hamid, Darulihsan and Yazid, MZA and Che Daud, Nur Rusydina and Mohd Din, Nik Nur Liyana (2017) An Investigation into the Impact of Flexural Elastic Modulus on the Dimensional Instability in CNC Turning of Titanium Alloy Grade 5 - Ti6Al4V / Sangeeth Suresh...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 73-85. ISSN 18235514.

Ismail, Nur Farhani and Muhamad, Norhamidi and Sulong, Abu Bakar and Che Haron, Che Hassan and Tholibon, Dulina and Tharazi, Izdihar and MdRadzi, Mohd Khairul Fadzly and Razak, Zakaria (2017) Mechanical Properties of Compression Molded Epoxy Polymer Composites Reinforced with Kenaf Fibers / Nur Farhani Ismail ...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 1-12. ISSN 18235514.

Khamis, Nor Kamaliana and Md Deros, Baba and Nawawi, Roslizawati and Saleh, Chairul (2017) Muscle Activity of the Upper and Lower Body Part in Car Gearing Action: A Preliminary Study / Nor Kamaliana Khamis...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 157-165. ISSN 18235514.

Tholibon, Dulina and Sulong, Abu Bakar and Muhamad, Norhamidi and Ismail, Nur Farhani (2017) Optimization of Hot Pressing Process for Unidirectional Kenaf Polypropylene Composites by Full Factorial Design / Dulina Tholibon...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 23-35. ISSN 18235514.

Tham, Ghalib and Mohamad Nor, Nur Hafiez and Faruqi, Mohamad and Saedon, Juri (2017) Prediction of Weld Bead Geometry for Small-Wire Submerged Arc Welding in 1G position / Ghalib Tham...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 145-156. ISSN 18235514.

Ramli, Mohd Ikram and Sulong, Abu Bakar and Muhamad, Norhamidi and Muchtar, Andanastuti and Zakaria, Mohd Yusuf (2017) Rheological Properties Of Titanium Alloy (Ti6Al4V) – Wollastonite (W) Composite Using Palm Stearin as Based Binder / Mohd Ikram Ramli...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 87-96. ISSN 18235514.

Ani, Mohammad Firdaus and Kamat, Seri Rahayu and Husin, Kalthom (2017) A Study of Psychophysical Factor for Driver Fatigue Using Mathematical Model / Mohammad Firdaus Ani...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 109-122. ISSN 18235514.

Wan Mansor, Wan Nuha and Md Tahir, Nurul Hidayah and Abd Ghani, Jaharah and Che Haron, Che Hassan and Nuawi, Mohd Zaki and Rizal, Muhamad (2017) Tool Wear Condition Monitoring using Slip Ring and Accelerometer System in Milling AISI P20 Tool Steel / Wan Nuha Wan Mansor...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 63-72. ISSN 18235514.

Masri, Nurhidayah and Md Deros, Baba and Mohd Yusof, Hanizah (2017) Work-Related Musculoskeletal Disorders Among Tea Pluckers / Nurhidayah Masri...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 221-232. ISSN 18235514.