Items where Division is "Faculty of Applied Sciences" and Year is 2011
A
Effect of strand sizes and resins on oriented strand board using kelempayan / Muhamad Amir Hamzah A.Rahim.
(2011)
[Student Project]
(Unpublished)
Mechanical properties of composite panel from sugarcane baggase, oil palm frond and fiberglass – an alternative for furniture material / Fareezal Abd. Wahab.
(2011)
[Student Project]
(Unpublished)
Preliminary study on the physical and mechanical properties of gypsum- sawdust board / Muhammad Al Amin Abdul Hamid, Roslee Mohammad Rais and Muhammad Yassar Salleh.
(2011)
[Student Project]
(Unpublished)
The distribution of Sepetir lichin (Sindora coriacea) and Sepetir daun nipis (Sindora echinocalyx) in UiTM Jengka forest reserve at line 11- 20 / Khairul Hafizuddin Abdul Rahman, Muhammad Ahnaf Ahmad Sakhairi and Mohd Afiq Mat Aris.
(2011)
[Student Project]
(Unpublished)
Preliminary study on specific gravity and fiber morphology of Rotan Tai Landak (Daemonorops hystrix) / Ridhzuan Adnan, Mohd Ali Hanafiah Mohd Razmi and Muhammad Nabil Naufal Mohd Nasim.
(2011)
[Student Project]
(Unpublished)
B
Effect of chemical composition in oil palm trunk towards to furniture manufacturing process/ Asyraf Aminuddin Bani Amin.
(2011)
[Student Project]
(Unpublished)
C
Mechanical and physical properties on oriented strand board from kelempayan wood/ Mohd Aizuddin Che Rosli.
(2011)
[Student Project]
(Unpublished)
D
The dimensional stability of Mersawa (Anisoptera spp) / Jackie Deman, Lionel Daan Joannes and Ahmad Basirun Abdul Rashid.
(2011)
[Student Project]
(Unpublished)
H
Properties of oil palm empty fruit bunch fibers, coconut husk and polypropylene composite - potential furniture material / Mohd Jafni Hashim.
(2011)
[Student Project]
(Unpublished)
Distribution of red meranti species (Shorea leprosula, Shorea parvifolia and Shorea pauciflora) in UiTM Jengka Education Forest / Nur Hazlin Hasmi, Syazwani Zakaria and Nurul Hanisah Mohd Khazan.
(2011)
[Student Project]
(Unpublished)
I
Physical and mechanical properties of hybrid plywood from coconut and rubberwood veneer bonded with different adhesive / Mohammad Fahamy Ismail.
(2011)
[Student Project]
(Unpublished)
Evaluation on the physical and mechanical properties of particleboard from Batai (Paraserianthes falcataria) / Noor Rehan Ismail.
(2011)
[Student Project]
(Unpublished)
J
Wood plastic composite from Batai (Paraserianthes falcataria) / Nazirah Jamaluddin and Nur Syuhada Abd Latif.
(2011)
[Student Project]
(Unpublished)
A study on demand of home furniture in Courts Mammoth branch Temerloh, Pahang / Muhammad Nizam Jamaludin.
(2011)
[Student Project]
(Unpublished)
Factors influenced the school chair failure/ Nur Afihah Jusoh.
(2011)
[Student Project]
(Unpublished)
K
Characterization of finishing with acid catalyst lacquer and nitrocellulose lacquer on sesenduk (Endospermum diadenum)/ Zilawati Kamal.
(2011)
[Student Project]
(Unpublished)
Potential of coconut sawdust as a new material for furniture product/ Mustaza Kamaludin.
(2011)
[Student Project]
(Unpublished)
Properties of thermoplastic composite using sesendok and kelempayan sawdust with different percentage of polypropylene / Faerul Hafiz Khairudin.
(2011)
[Student Project]
(Unpublished)
M
Screw withdrawal properties of particleboard made from batai (Paraserianthes falcataria) species / Safura Mahat.
(2011)
[Student Project]
(Unpublished)
Application of fastener in table and chair construction / Cypriano Mansuan.
(2011)
[Student Project]
(Unpublished)
Shrinkage properties of Kedondong bulan (Canarium littorale blume) / Hayatulnuffus Mat Nawi and Nik Norhashima Daud.
(2011)
[Student Project]
(Unpublished)
Satisfactions of student towards school furniture/ Sapura Mat Zanggi.
(2011)
[Student Project]
(Unpublished)
Natural finishing performance of acid catalysed (AC) and nitrocellulose (NC) on ludai (Sapium baccatum) wood / Nurul Wahida Md Said.
(2011)
[Student Project]
(Unpublished)
Properties of laminated veneer lumber from oil palm trunk by using different adhesive/ Muhammad Najib Moh Yusoff.
(2011)
[Student Project]
(Unpublished)
Furniture design in district of Temerloh/ Nor Azura Mohammed Shariff.
(2011)
[Student Project]
(Unpublished)
Mechanical properties of composite panel from coconut husk, kenaf fiber and fiberglass - an alternative for furniture material / Nor Izzati Mohd Ali.
(2011)
[Student Project]
(Unpublished)
Chemical composition of Kelempayan (Neomalarckia cadamba), Sentang (Azadirachta exscelsa) and Acacia (Acacia mangium) / Mohd Sayuti Mohd Ghani, Faisal Hadi Mohd Amizam and Meor Muhammad Zaman Meor Ahmad.
(2011)
[Student Project]
(Unpublished)
Properties of particle board made from Batai (Paraserianthes falcataria) using phenol formaldehyde / Siti Ainatul Mardhiah Mohd Hata and Siti Khairoh Hassan.
(2011)
[Student Project]
(Unpublished)
Demand on sofa design / Latifah Mohd Said.
(2011)
[Student Project]
(Unpublished)
Effect of resin content and species ratio on the properties of particleboard from leuceana spp and rubberwood/ Mohd Aizuddin Mohd Yusoff.
(2011)
[Student Project]
(Unpublished)
Screw withdrawal properties on particleboard from oil palm frond / Nur Shazana Atiqa Mohd Zamri.
(2011)
[Student Project]
(Unpublished)
Bending strength of finger joint from neomalarkia cadamba and sappium baccatum/ Nik Amirul Fadzil Mokhtar.
(2011)
[Student Project]
(Unpublished)
N
Chemical from wood / Norain Nordin.
(2011)
[Student Project]
(Unpublished)
O
The dimensional stability properties of Kedondong senggeh (Canarium psedosumalranum) / Ahmad Badrul Hisyam Omar, Mohamad Alif Aizat Mohd Azhar and Muhammad Shafiq Hassan.
(2011)
[Student Project]
(Unpublished)
Types of wood preservative for wood / Nor Rohana Osman.
(2011)
[Student Project]
(Unpublished)
Anatomical, physical and mechanical properties of leucaena leucocephala wood / Mohd Hanif Othman.
(2011)
[Student Project]
(Unpublished)
Physical and mechanical properties of gypsum-paper sludge board in furniture application / Norazleen Othman.
(2011)
[Student Project]
(Unpublished)
R
Effect of particle size and resin on kelempayan particleboard/ Mohd Faizal Razali.
(2011)
[Student Project]
(Unpublished)
S
Nail withdrawal properties on particleboard from acacia (Acacia mangium) / Addi Aidileikhmal Salikun.
(2011)
[Student Project]
(Unpublished)
The mechanical properties of dimension stability of Kedondong kerantai lichin (Santiria laevigata) / Christianus Samuin and Lokman Mohamad.
(2011)
[Student Project]
(Unpublished)
Strength properties of t-shaped joint members using kelempayan wood/ Asnawi Seraila.
(2011)
[Student Project]
(Unpublished)
The distribution study of red Meranti group (shorea ovalis, shorea macroptera,shorea acuminata) in UiTM Jengka forest reserve (base line 1 : line 11 - 20) / Mohamad Saiful Sulaiman, Muhamad Nasrulrahman Che Kar and Mohd Adli Hamzah.
(2011)
[Student Project]
(Unpublished)
Species compositions and stand structures of UiTM Jengka Forest Reserve in line 13 / Ahmad Zaki Akmal Suryani, Faizah Syakira Kamaruzaman and Umar Khattab Jamal.
(2011)
[Student Project]
(Unpublished)
W
Distribution of Pulai (Alstonia angustiloba) in UiTM Jengka Forest Reserve / Wan Mohd Farid Wan Abdul Manaf, Syaiedeen Awang Rani and Muhammad Hafiz Ahmad Zaini.
(2011)
[Student Project]
(Unpublished)
Wettability of kelempayan (neolamarckia cadamba), sesenduk (endospernum diadenum) and ludai (sapium baccatum), using distilled water, urea formaldehyde and phenol formaldehyde/ Wan Normardiyana Wan Abdullah.
(2011)
[Student Project]
(Unpublished)
Lead time management for furniture manufacturing/ Wan Fadlina Wan Chik Ahmad.
(2011)
[Student Project]
(Unpublished)
Development of television rack from off-cut timber / Wan Jamalludin Wan Omar, Khairul Suhaimi Jusoh and Mohd Arshad Azmi.
(2011)
[Student Project]
(Unpublished)
Strength of wood dowel from Mersawa, Kedondong Bulan and Kedondong Sengeh in UiTM forest / Wan Muhamad Farhan Wan Yusoff, Aizuddin Arif Abdul Ghani and Muhamad Faiz Mahmood.
(2011)
[Student Project]
(Unpublished)
Y
Users satisfaction towards UiTM Pahang workshop layout/ Hanani Yuhaniz.
(2011)
[Student Project]
(Unpublished)
Z
Demand on dining table in Courts Mammoth Temerloh/ Fitri Yazid Zainal. (2011) [Student Project] (Unpublished)
Physical and mechanical properties of three-layer particleboard from oil palm frond (OPF) / Norfazlina Zainal.
(2011)
[Student Project]
(Unpublished)
Properties of wood plastic composites made from sesendok/ Mohammad Bakri Zulkifili.
(2011)
[Student Project]
(Unpublished)