Items where Division is "Faculty of Mechanical Engineering" and Year is 2002

Group by: Creators | Item Type | No Grouping

Number of items: 113.

Thesis

Abd Rahim, Mohd Abira (2002) Differential for quad rider with chain and sprocket power transmission / Mohd Abira Abd Rahim. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Abdul Ghani, Mohd Nazli (2002) Availability of solar energy for natural lighting and electricity / Mohd Nazli Abdul Ghani. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Abdul Khalid, Kamarul Ridzuan (2002) Identification of unutilized energy in UiTM buildings and proposal of control system for energy optimization / Kamarul Ridzuan Abdul Khalid. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Abdul Majid, Nurul Ihsan (2002) Propeller test stand / Nurul Ihsan Abdul Majid. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Abdul Rahman, Roazian @ Roezwan (2002) Design and fabrication of activated carbon based of natural gas vehicle container / Roazian @ Roezwan Abdul Rahman. (2002) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Abdul Rahman, Wan Arma Idayu (2002) The analysis of SME MD3 - 160 aircraft wing structure / Wan Arma Idayu Abdul Rahman. (2002) Degree thesis, thesis, Universiti Teknologi MARA.

Abdul Rauf, Mohd Taha (2002) Preliminary design of 19 passengers multipurpose airplane / Mohd Taha Abdul Rauf. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Abdullah, Azrul Norhar (2002) Differential for quad rider with chain and sprocket power transmission / Azrul Norhar Abdullah. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Ahmad, Norliana (2002) Building up of FMS simulation model for furniture industry / Norliana Ahmad. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Ahmad, Yahaya (2002) Recirculating water tunnel / Yahaya Ahmad. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Ali Sibramulisi (Hj), Azizah (2002) The effect of environment on automotive materials / Azizah Hj Ali Sibramulisi. (2002) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Ambiah, Ubaidillah (2002) Rail shear testing / Ubaidillah Ambiah. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Ayub, Maziyati (2002) Strength analysis of drinking glass bottle / Maziyati Ayub. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Azizan, Ahmad Zahari (2002) Daylighting technology for energy efficiency and thermal comfort for Wilayah Mosque in Kuala Lumpur / Ahmad Zahari Azizan. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Baharudin, Susazlin (2002) Strength analysis of drinking glass bottle / Susazlin Baharudin. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Baharum, Jafri (2002) Feasibility study for an integrated energy system (wave and underwater current energy) / Jafri Baharum. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Che Ali, Mohd Alimin (2002) Analysis of lightweight box structure / Mohd Alimin Che Ali. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Daud@Yusof, Ahmad Sharifuddin (2002) Impact performance of glass fibre/epoxy composite material / Ahmad Sharifuddin Daud@Yusof. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Deraman, Mohd Sabri (2002) Rail shear testing / Mohd Sabri Deraman. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Elias, Fauzan Shaile (2002) Thermal comfort studies in non-conditioned room / Fauzan Shaile Elias. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Enggong, Lindy (2002) Environmental effects on automotive materials / Lindy Enggong. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Hamidon, Muhammad Helmi (2002) A study of unutilized energy in UiTM buildings / Muhammad Helmi Hamidon. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Hashim, Mohd Apandi (2002) Internal loads effects on the air conditioning system / Mohd Apandi Hashim. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Hashim, Mohd Noor (2002) Design of sprinkler system for fire protection installation using fully hydraulic calculation by computer aided programming method / Mohd Noor Hashim. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Hasim, Mokhtar (2002) CAD/CAE opportunity in product modelling of complicated shape (intake manifold) / Mokhtar Hasim. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Hussin, Dzul Fadzli (2002) Propeller test stand / Dzul Fadzli Hussin. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Ibrahim, Fahizi (2002) Impact performance of glass fibre/epoxy composite material / Fahizi Ibrahim. (2002) Degree thesis, thesis, Universiti Teknologi MARA.

Idris, Nurdiana (2002) Refurbishment of a subsonic wind tunnel / Nurdiana Idris. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Ithnin, Abd. Halim (2002) Study on tensile and flexure performance of hybrid composite / Abd. Halim Ithnin. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Jamaludin, Jaffri (2002) Gasoline direct injection two dimensional CFD study employing fluent V4.2 / Jaffri Jamaludin. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Johari, Mohd Badrul Azha (2002) Availability of solar energy for natural lighting and electricity / Mohd Badrul Azha Johari. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Kasah, Muhamad Hanizam (2002) Thermal analysis of composite materials for roofing / Muhamad Hanizam Kasah. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Kemis, Khairul Annuar (2002) To analyze the power output of a free flowing water turbine / Khairul Annuar Kemis. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Mad Nordin, Mohammad Hafidz (2002) Study on tensile and flexure performance of hybrid composite / Mohammad Hafidz Mad Nordin. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Mat Yusuf, Lili Munira (2002) Simulation of energy efficient building using Energy-10 / Lili Munira Mat Yusuf. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Md Lazim, Mohd Fadzil (2002) Study process and proposal improvement of safety glass production / Mohd Fadzil Md Lazim. (2002) Diploma thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Md Salleh, Muhammad Haris and Ibrahim, Abdul Aziz and Illias, Aminuddin (2002) Automotive electronic control unit (ECU) / Muhammad Haris Md Salleh, Abdul Aziz Ibrahim and Aminuddin Illias. (2002) Diploma thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Md. Isa, Md. Nasir (2002) The fluidization of group C particles: the effect of binary mixture / Md. Nasir Md. Isa. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Md. Jilis, Sharum (2002) Gasoline Direct Injection - Three dimensional CFD study employing fluent V 4.25 / Sharum Md. Jilis. (2002) Degree thesis, thesis, Universiti Teknologi MARA.

Mohamad, Wan Nor Azam (2002) Analysis of lightweight box structure / Wan Nor Azam Mohamad. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Mohamed, Marliana (2002) Hydrodynamics studies of low temperature model of fluidized bed / Marliana Mohamed. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Mohd Azmi, Azlin (2002) Propeller design for solar powered glider / Azlin Mohd Azmi. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Mohd Ghazalli, Abdul Rashid (2002) Feasibility study for an integrated energy system (wind energy) / Abdul Rashid Mohd Ghazalli. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Mohd Khalib, Mohd Azam (2002) Thermal analysis of a solar house / Mohd Azam Mohd Khalib. (2002) Degree thesis, thesis, Universiti Teknologi MARA.

Mohd Mokhtar, Mohd Mukhreez (2002) History of metallurgical development of keris / Mohd Mukhreez Mohd Mokhtar. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Mohd Nor, Mohd Ismail and Abd Razak, Mohd Faizulakma and Muradi, Nor Mohammad Jailani and Haron, Mohd Fairuz (2002) Study on limited slip differential for cars / Mohd Ismail Mohd Nor ... [et al.]. (2002) Diploma thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Mohd Nor, Safwan (2002) Effect of loading rates on the fracture toughness of HDPE plastics / Safwan Mohd Nor. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Mohd Yusof, Hassnol Ishraff (2002) Effect of loading rates on fracture toughness of HDPE / Hassnol Ishraff Mohd Yusof. (2002) Degree thesis, thesis, Universiti Teknologi MARA.

Mohd. Nasir, Mohd. Nazira (2002) Recirculating water tunnel (modelling and fabrication) / Mohd. Nazira Mohd. Nasir. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Ngah Abu, Ma'arof (2002) Feasibility study for an integrated energy system (solar energy) / Ma'arof Ngah Abu. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Nordin, Ahmad Shehan (2002) Finite element method (FEM) approach towards composite material / Ahmad Shehan Nordin. (2002) Degree thesis, thesis, Universtiti Teknologi MARA (UiTM). Physical copy is available on shelf

Omar, Marfuza and Abd Majid, Maziah Suraya (2002) A comparative study of air filters in air conditioning industry / Marfuza Omar and Maziah Suraya Abd Majid. (2002) Diploma thesis, thesis, Universiti Teknologi Mara (UiTM). Physical copy is available on shelf

Osman, Mohd. Zahir and Ahmad Salleh, Saiful Anuar (2002) Fabrication and analysis of three dimensional space truss structure / Mohd. Zahir Osman and Saiful Anuar Ahmad Salleh. (2002) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Othman, Abdul Halim (2002) Daylighting technology for energy efficiency and thermal comfort for Wilayah Mosque in Kuala Lumpur / Abdul Halim Othman. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Othman, Muhamad Fauzi and Abdul Rashid, Mohd Fazli and Awg. Noh, Mohd lukman and Salleh, Mohd Zulkifli (2002) Solar battery / Muhamad Fauzi Othman … [et al.]. (2002) Diploma thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Pengiran, Rosly (2002) Investigation of rust formation on steel exposed in heavy industrial environment / Rosly Pengiran. (2002) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Ramli, Rosdan (2002) The fluidization of group C particles: the effect of binary mixture / Rosdan Ramli. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Tahir, Norazila (2002) Building up of FMS simulation model for furniture industry / Norazila Tahir. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Yahya, Nor Hayati (2002) Corrosion protection / Nor Hayati Yahya. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Yem, Yusniza (2002) History of metallurgical development of boat propeller and keris (a comparison) / Yusniza Yem. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Yusof, Ahmad Syahrin (2002) Tensile impact test / Ahmad Syahrin Yusof. (2002) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Zainal Abidin, Mohd Farris (2002) Design of test fixture for high cycle fatigue test of fiber-reinforced composite laminates / Mohd Farris Zainal Abidin. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Zubir, Nurhaniza (2002) Hydrodynamics studies of low temperature model of fluidized bed / Nurhaniza Zubir. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Student Project

Ab. Rahim, Adam Hood and Ab. Wahab, Aqil and Alwi, Mohd. Yasin and Ahmad Subki, Iftitah (2002) Arrow coin system / Adam Hood Ab. Rahim … [et al.] Aqil Ab. Wahab, Mohd. Yasin Alwi, H.M. Iftitah Ahmad Subki. (2002) [Student Project] (Unpublished)

Abd Aziz, Fathul Muin and Mat Said, Mohd Sharizal and Mohd Ali, Mohd Khairul Bukhari (2002) Recycled hot air from air conditioner / Fathul Muin Abd Aziz ,Mohd Sharizal Mat Said and Mohd Khairul Bukhari Mohd Ali. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Abd. Malek, Razmi and Misno, Harun and Mohd Zaki, Mohd Faiezal (2002) Aerospace component manufacturing / Razmi Abd. Malek, Harun Misno and Mohd Faiezal Mohd Zaki. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Abdul Rahim, Abdul Baasit and Ariffin, Muhammad Firdaus (2002) Building up a physical model layout of FMS for furniture industry / Abdul Baasit Abdul Rahim and Muhammad Firdaus Ariffin. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Abdul Razak, Rozanizam and Mansor, Abdul Aziz (2002) Cutting technique structure using explosive shape charge / Rozanizam Abdul Razak and Abdul Aziz Mansor. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Abdul Shukor, Nor Azwan and Mohamad Sadali, Mohd.Rizal and Norizan, Norhazwan (2002) The conceptual study in improving separation process using electro-pneumatic system in palm oil industry / Nor Azwan Abdul Shukor, Mohd.Rizal Mohamad Sadali and Norhazwan Norizan. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Adam, Muhammad and Ahmad, Isnel Sabrillah (2002) Ultra-light propeller / Muhammad Adam and Isnel Sabrillah Ahmad. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Affandi, Adia Ewani and Abdul Mutalif, Shilawaty (2002) The virtual laboratory (deflection of simply supported beam) / Adia Ewani Affandi and Shilawaty Abdul Mutalif. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Ahmad, Mohd Faizal and Anuar, Mohd Sufian (2002) Upper bearing blank / Mohd Faizal Ahmad and Mohd Sufian Anuar. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Ahmad, Mohd Faizal and Syed Azizan, Syed Muhammad Ashraf and Sharifuddin, Mohd Sahir and Baharom, Zainuzabha (2002) The automotive brake system: the pneumatic braking system (air brake system) / Mohd Faizal Ahmad ... [et al.]. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Ali, Zex and Kamsin, Nor Mala (2002) Rubber tube as an elastic spring in soap dispenser mechanism / Zex Ali and Nor Mala Kamsin. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Awang, Azhary and Ismail, Shamsul Irwan (2002) Development of low cost catalyst-cobalt system for engine emission control / Azhary Awang and Shamsul Irwan Ismail. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Azmy, Mohd Azizi and Rahmat, Idris (2002) Present and future challenge in packaging material / Mohd Azizi Azmy and Idris Rahmat. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Baba, Samah and Nik Shukri, Nik Arif (2002) Mechanical aspects of customer satisfaction on Perodua Kancil / Samah Baba and Nik Arif Nik Shukri. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Baharom, Rashdan and Alhadi, Muhammad Iqbal (2002) Fatigue of carburized samples / Rashdan Baharom and Muhammad Iqbal Alhadi. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Che Hasim, Khairul Anuar and Mohd Yunus, Mohd Ashar Yusri and Azman, Suhaidi (2002) Study the effect of pressure on polypropylene/epoxy plates with ends fixed / Khairul Anuar Che Hasim, Mohd Ashar Yusri Mohd Yunus and Suhaidi Azman. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Daud, Mohd Zul-Azri (2002) Design of test fixture for high cycle fatigue test of fiber-reinforced composite laminates / Mohd Zul-Azri Daud. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Hassan, Mohd Hasrizal and Mamat, Mohd Shahril and Ismail, Zakari (2002) A study of an elevator / Mohd Hasrizal Hassan, Mohd Shahril Mamat and Zakari Ismail. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Ibrahim, Mohamad Nizam and Wan Hussin, Wan Rashdan (2002) Design of cold storage for various agricultures product / Mohamad Nizam Ibrahim. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Ibrahim, Mohd Nazlizan and Abdul Hamid, Norhissham and Wan Mohamad, Wan Nazrul Faizal (2002) Work study in factory (cable slack making operation) / Mohd Nazlizan Ibrahim, Norhissham Abdul Hamid and Wan Nazrul Faizal Wan Mohamad. (2002) [Student Project] (Unpublished)

Ibrahim, Norlita and Mohamed Tarmidi, Norfajariah and Norzain, Norzakiya (2002) Flexible manufacturing system layout for furniture industry / Norlita Ibrahim, Norfajariah Mohamed Tarmidi and Norzakiya Norzain. (2002) [Student Project] (Unpublished)

Ismail, Izaham and Abd. Jalil, Mohd. Rahmat and Nordin, Fazli (2002) Analysis of piston head metallurgy / Izaham Ismail, Mohd. Rahmat Abd. Jalil and Fazli Nordin. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Kamarudin, Muhamad Airul Azli and Ismail, Ridzuan and Soid, Mohd Sani (2002) The study of go-kart assembly / Muhamad Airul Azli Kamarudin, Ridzuan Ismail and Mohd Sani Soid. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Mansor, Khairulnizam and Ishak, Mohd. Burhanuddin (2002) Designing the manufacturing process of window clamp using CNC machine / Khairulnizam Mansor and Mohd. Burhanuddin Ishak. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Mathan, Zainal and Bahari, Mahani (2002) Predictive maintenance of air cooled condenser fan gearbox using vibration analysis / Zainal Mathan and Mahani Bahari. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Mazlee, Iskandar Dzulkarnaen and Zulkifly, Mohamad Nizam (2002) A study on mechanical safety aspects of a riveted joint used in a baby walker / Iskandar Dzulkarnaen Mazlee and Mohamad Nizam Zulkifly. (2002) [Student Project] Physical item is in process (Unpublished)

Mesror, Ismail and Manan, Fauzan and Ahmad, Nasrul Rahman (2002) The study about gasoline direct injection / Ismail Mesror, Fauzan Manan and Nasrul Rahman Ahmad. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Mohamed Shariff, Mohammad and Sallehudin, Harith Shah and Aman, Saiful Adli (2002) Model automatic horizontal bandsaw machine II / Mohammad Mohamed Shariff, Harith Shah Sallehudin and Saiful Adli Aman. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Mohamed Yusoff, Ahmad Fadzli and Mohamed Zaki, Faizul (2002) Single and multiple plane balancing / Ahmad Fadzli Mohamed Yusoff and Faizul Mohamed Zaki. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Mohd Kamil, Ahmad Fadzli and Mohd Nazran, Azmi and Mohd Sani, Shahrizal Izzat (2002) Composite material on the aircraft structure / Ahmad Fadzli Mohd Kamil, Azmi Mohd Nazran and Shahrizal Izzat Mohd Sani. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Mohd Kawi, Mazhar and Masri, Al Faisal (2002) Ergonomics study of musculoskeletal disorders in preventive maintenance of prime mover and work study in improvement of maintenance straddle carrier / Mazhar Mohd Kawi and Al Faisal Masri. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Mojuli, Peter Gerald and Abdol Rahman, Mohammad Hazrin and Zulkapli, Zulhairizam (2002) The effects of spring to the suspension system / Peter Gerald Mojuli, Mohammad Hazrin Abdol Rahman and Zulhairizam Zulkapli. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Muhammad, Mohd Noor Ariff and Mohamad, Mohamad Nor Azuan (2002) Study of welding on aluminum alloy 5083 / Mohd Noor Ariff Muhammad and Mohamad Nor Azuan Mohamad. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Mukhtar, Mohd. Effandy and Sahani, Muhamad Nor Taufik and Majuan, Shahirrunizan (2002) Experimental study of laminar and turbulent flow / Mohd. Effandy Mukhtar, Muhamad Nor Taufik Sahani and Shahirrunizan Majuan. (2002) [Student Project] (Unpublished)

Nordin, Muhamad Khairul and Mohamad, Saiful Anuar and Seliman, Saharuddin (2002) Powder metallurgy process of the lower bearing blank / Muhamad Khairul Nordin, Saiful Anuar Mohamad and Saharuddin Seliman. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Omar, Mohamad Junid and Azman Lingam, Ahmad Fareed (2002) A study to seek the possibility to implement Flexible Manufacturing System (FMS) in a small local plastic company / Mohamad Junid Omar and Ahmad Fareed Azman Lingam. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Osman, Saat and Osman, Hamirun (2002) Ultrasonic detection of contact point corrosion / Saat Osman and Hamirun Osman. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Othman, Muhamad Fauzi and Abdul Rashid, Mohd Fazli and Awg. Noh, Mohd Lukman and Salleh, Mohd Zulkifli (2002) Solar battery / Muhamad Fauzi Othman... [et al.]. (2002) [Student Project] (Unpublished)

Ramli, Jazzali and Mansor, Mohd Shahril and Ismail, Mohd Saidi and Abu Bakar, Mohd Hairuan (2002) Perbandingan di antara tangki beratap tetap dan tangki beratap bumbung / Jazzali Ramli ... [et al.]. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Romzan, Rahmat Nizam and Hashim, Mohd Hezrin and Razali, Norfazizi (2002) Variable Valve Timing / Rahmat Nizam Romzan, Mohd Hezrin Hashim and Norfazizi Razali. (2002) [Student Project] (Unpublished)

Rosli, Mohd Khairul Adha and Jamaluddin, Mohd. Fairuz Farhan (2002) Research on forklift system / Mohd Khairul Adha Rosli and Mohd. Fairuz Farhan Jamaluddin. (2002) [Student Project] (Unpublished)

Said, Roslan and Muda, Mohd Adami (2002) Natural Gas Vehicle (NGV) / Roslan Said and Mohd Adami Muda. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Salim, Ramlan and Wahid, Zaiton (2002) Mechanized parking system / Ramlan Salim and Zaiton Wahid. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Salleh, Mohamad Sopi and Ahmad, Nasir (2002) Design and fabricate a press mould/die system for making fibre material specimens / Mohamad Sopi Salleh and Nasir Ahmad. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Samsuddin, Azman and Sukri Omar, Ros (2002) Implementation of finite element method (FEM) in solving strength of material problems / Azman Samsuddin and Ros Sukri Omar. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Samsuri, Sharolfizan and Harun, Hazmi (2002) Smart pen the implementary of designing for mass production / Sharolfizan Samsuri and Hazmi Harun. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Sikh Omar, Muhammad Ridhwan and Sabirin, Muhammad Razif and Omar, Shafie (2002) To study the effect of different sintering temperature on ferum hydroxide / Muhammad Ridhwan Sikh Omar, Muhammad Razif Sabirin and Shafie Omar. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Soberi, Khairul Dahari (2002) Preventive maintenance for the air conditioning system in PTAR 1 / Khairul Dahari Soberi. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Socret, Mackenzie and Mohd Rawi, Mohd Ikram and Miskam, Mohd Ashriq (2002) Failure analysis on Kriss motorcycle handle locking mechanism / Mackenzie Socret ... [et al.]. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Tukimin, Muhammad Ridzuwan and Zakaria, Zaidihafizi and Mahmood, Nazli (2002) Wear analysis of piston ring / Muhammad Ridzuwan Tukimin ...[et al.]. (2002) [Student Project] (Unpublished)

This list was generated on Fri Oct 3 20:09:09 2025 UTC.