Items where Division is "Faculty of Mechanical Engineering" and Year is 2000

[up]

Group by: Creators | Item Type | No Grouping

Number of items: 53.

Ergonomics study of musculoskeletal disorders in an assembly plant / Mohd Rizal Abd Razak and Clement Joseph. (2000) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical item is in process

Maintenance of fuel spray nozzle in fuel component workshop MAS Aerotechnologies Sdn Bhd / Azli Abdul Manap and Hussin Hashim. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

The practice of Unit Penyelenggaraan in maintaining air conditioning system in UiTM Shah Alam: a critical analysis / Anwar Abdul Rahman and Maz Izha Samsudin. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Door cylinder look remote control with alarm system / Hairul Adzha Abdullah. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Cross flow heat exchanger / Azizah Ali Sibramulisi, Harlina Ismail and Rosma Warni Mohamad. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Energy auditing for FTMSK's building / Roger Anthony. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Environmental assisted cracking of aluminium alloy AA 6061 / Azman Anuar and Ashari Kasmin. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

The study of crack initiation in sintered steel and mild steel under fatigue / Ahmad Ashari and Zaid Zahari. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Kemalangan dan keselamatan di perkilangan / Azlan Awang, Nizam Shahril Basiron and Saiful Amri Abdul Rashid. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Fabrication of the suspension test set up / Mohd Zaki Bahrom, Kamarul Fiqri Ahmad and Mohd Shahar Abdul Aziz. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Design of a change-over controller for electrical back-up power supply / Abdul Rahim Basarai @ Basri, Khalil Hamzah and Md Adharuddin Md Arif. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

GUI implementation of polymeric foams testing using MATLAB® / Mohd Hamid Basir and Zailan Daud. (2000) [Student Project] Physical copy is available on shelf (Submitted)

Die casting / Roslan Daud, Mohamad Nizam Ibrahim and Syahriman Hakim Mansor. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Amalan penyelenggaraan peralatan/mesin di makmal-makmal Fakulti Kejuruteraan Mekanikal Universiti Teknologi MARA Shah Alam / Azrul Naim Dzulkapli and Mohd Nazri Jauhari. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Development of a computer program for shaft design / Basri Ibrahim and Nang Jamilah Nik Omar. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Turbocharges / Iliah Ibrahim, Abdul Mohsein Mohd Shariff and Mohd Azlan Marjo. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Metal stamping / Mohd Khatib Ibrahim, Aidil Dzilkhaire Abd. Lateh and Joehari Ibrahim. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Energy - efficient building: illumination and visual comfort from daylighting / Nor Hisammuddin Jalil, Khairuzi Awang Baharu and Zamri Ab Wahab. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Performance analysis of gas turbine / Sharil Khalid and Hasnol Zakaria. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Suggestion of integrated trolley system in Kuala Lumpur International Airport / Khairul Anuar Mahmood@Talib and Shaiful Bakhtiar Ahmad. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Reka bentuk kerusi berkelah / Sohimin Mansor and Mohammad Romzi Tik. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Group Technology / Fazil Mat Yit. (2000) [Student Project] (Unpublished)

Maintenance management of aircraft component in component overhaul Department of Masa Sdn.Bhd / Mohd. Nor Azman Md. Zin and Anuar Abdullah Hashim. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Analysis E344 using fluent / Ahmad Asfanizam Mohamad and Aizirizal Arshad. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Product data exchange for concurrent engineering process / Zaimee Mohamad and Mohd Farid Isa. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Computer aided engineering opportunities in injection molding design / Irwan Mohd and Siti Haryani Tomadi. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Dynamic characteristics of polymeric foam materials under low speed - high impact energy using Dynatup 825CF / Kyairul Anuas Mohd and Mohamad Noraini Mansor. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Fabrication of automotive clutch demonstration models / Ihsan Syadid Mohd Azmi, Ismarullizam Mohd Ismail and Mohd. Zaidi Zawawi. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Pasca energy system / Azeezul Fadzlee Mohd Farid, Azwan Zakaria and Haszrol Mohd Zain. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Creating technical inspection system for an automobile / Mohd Faizul Iqmal Mohd Kamil, Mohd Firuz Baharin and Abd. Shukur Mohd Soaudi. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

The analysis of beam using FORTRAN 77 programming / Roshidi Mohd Sani and Zainahar Zainul. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

A study of noise control in industry / Mohd Khuzairy Mohd Yusof and Ahmad Lutfi Md. Yusoff. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Manufacturing simulation of golf ball plant using WITNESS / Zairulaily Mohd Zain and Nazaruddin Said Dol Hardari. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Ujikaji momen lentur dan daya ricih bagi beban teragih seragam / Nor Asmalisa Mohd. Anuar and Yusnita Mat Yusof. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Condition based maintenance (CBM) study: to calculate data and find T-s and p-h diagram for air-conditioning system based on actual data from observation at PTAR1 / Shaiful Amrol Mohd. Arifin, Gafar Mohd. Duha and Mohd Asrul Ishak. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Advanced composite materials in aircraft applications / Mohd. Nizam Mohd. Zain and Mohd. Nazirudin Tahir. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

To investigate and diagnose the engine problems and used it as a study purpose / Abdul Habib Muhamad Fuzi and Ahmad Najib Abu Bakar. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Ergonomics car display / Ahmad Zaidi Mukhayor and Mohd Azmir Ahmad. (2000) [Student Project] (Unpublished)

Automation: punching machine / Jamal Nahar Musa, Wan Mohd Firdaus Wan Hassan and Mohamad Izam Sahab. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

The study of the aircraft navigation systems: radio navigation system as a model / Ahmad Nazri Nasir and Ruszaini Ariffin. (2000) [Student Project] Physical copy is available on shelf (Submitted)

Chassis and design & roofing fabrication / Norshahrizal Nordin … [et al.]. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

PLC: literature survey and poster presentation / Siti Noratna Rashid. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Performances of fuel injection system in diesel engine using distributor type fuel injection pump / Mohd Nizan Rifai, Shahidan Sudin and Mohamad Sukri Ismail. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

A study on the application of solar energy using photovoltaic modules / Mohd Amin Rostam and Zulkifli Nordin. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Landing gear overhaul and maintenance / Badrul Hisham Salleh and Ahmad Effendee Ali. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

An alternative to shot down by using hot tapping and plugging method / Mohd Nazri Salleh and Amran Sa'ri. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Increasing strength of aircraft repaired parts / Mastuni Samiran and Mohd Fitri Mohd Yahya. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Comparative study of performance of a plane and packed-bed solar air heater / Mohd Ahuduvi @ Mustafa Wahid and Nik Sulhan Nik Ariff. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Further development of crank mechanism through PLC / Wan Hasidi Wan Muhamad, Sheikh Rizuan Jalaluddin dan Muhd Hanif Hasan. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Laser cutting / Mohd Huzaifah Yusoff, Anuar Effendi Mohd Salleh and Mohd Norhisham Mustafa. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

The modelling and optimizing of Wire-EDM process using a Neural Network / Mohd Nasrom Yusoff and Shahabudin Saharudin. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Increasing efficiency of compressor / Mohamad Ghufran Yusuf and Mohamad Riza Ebrahim. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Study of cooling performance of air-cooled engine / Faroak Faquruddin Zainal. (2000) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

This list was generated on Fri Dec 20 23:10:19 2024 UTC.