Abstract
Municipal Solid Waste (MSW) is considered as a nuisance or is said to have a negative value, which suggests that they are cheaper to throw away than to recover. A laboratory scale used leachate recirculation method is done for 3 months to observe the capability of the waste to treat the leachate. The leachate sample quality was taking by using eight parameter that were pH, COD, DO, SS, VSS, nitrate, turbidity and temperature. After 3 months doing the recirculation, the pH value is still in the range of alkali, while COD shows an increasing value within 24* day’s operation by optimum value of 10840 mg/L. However, the quality of leachate is improved in COD because the optimum value then decreases to 2485 mg/L on 64th day’s operation. Another parameter such as turbidity, SS and VSS of the leachate are also reaching their optimum value within 24th day’s operation with 385.7 NTU, 700 mg/L and 600 mg/L. However these parameter start to improved after 27th day’s operation by showing the decreasing value of 131.7 NTU,240 mg/L and 140 mg/L on 64th day’s operation. From overall, the leachate recirculation method is capable to treat the leachate consequently reduced the contaminants within the leachate. It is suggested that more research about leachate recirculation method will be done in future.
Metadata
Item Type: | Student Project |
---|---|
Creators: | Creators Email / ID Num. Othman, Ezlina 2003359011 |
Subjects: | T Technology > TD Environmental technology. Sanitary engineering > Municipal refuse. Solid wastes T Technology > TD Environmental technology. Sanitary engineering > Municipal refuse. Solid wastes > Sanitary landfills |
Divisions: | Universiti Teknologi MARA, Pulau Pinang > Permatang Pauh Campus > Faculty of Civil Engineering |
Programme: | Bachelor of Civil Engineering (Hons) |
Keywords: | Municipal Solid Waste, leachate recirculation method, treat, contaminants. |
Date: | 1 December 2006 |
URI: | https://ir.uitm.edu.my/id/eprint/32374 |
Download
32374.PDF
Download (78kB)