Influence of retrogression and re-aging heat treatment to stress corrosion cracking resistance on Al-Zn-Mg-Cu alloy / Deraman R., Aziz M. R. And Y. Yaakob

Deraman, R. and Aziz, M. R. and Yaakob, Y. (2009) Influence of retrogression and re-aging heat treatment to stress corrosion cracking resistance on Al-Zn-Mg-Cu alloy / Deraman R., Aziz M. R. And Y. Yaakob. Scientific Research Journal, 6 (2). pp. 1-11. ISSN 1675-7009

Official URL: https://srj.uitm.edu.my/

Abstract

The Al-Zn-Mg-Cu alloy is classified as a high strength to weight ratio material and is widely used in the aerospace structures. This alloy is susceptible to severe localized corrosion induced by heat treatment. The objective of this
study is to elucidate alternative heat treatment techniques, which reduce the alloys susceptibility to Stress Corrosion Cracking (SCC). A series of different heat treatments have been performed in the Al-Zn-Mg-Cu alloy using cube shaped and C-ring specimens that had been T6- and T7-tempered and undergone Retrogression and Re-aging (RRA) heat treatments. The specimens were exposed to hardness testing, optical testing and immersion testing in a
corrosive environment. The effectiveness of the heat treatments was evaluated with respect to improvements in corrosion resistance and the longevity of the Al-Zn-Mg-Cu alloy. The susceptibility of the Al-Zn-Mg-Cu alloy to SCC has been directly related to the precipitation of MgZn2 particles at the grain boundaries. Precipitation hardening of Al-Zn-Mg-Cu alloy increases the hardness of the material, but increases susceptibility to SCC failure. RRA
treatment greatly improved the corrosion resistance and longevity of the alloy combined with minimal strength reduction.

Metadata

Item Type: Article
Creators:
Creators
Email / ID Num.
Deraman, R.
rasdi925@ppinang.uitm.edu.my
Aziz, M. R.
UNSPECIFIED
Yaakob, Y.
UNSPECIFIED
Subjects: Q Science > QD Chemistry > Physical and theoretical chemistry > Flocculation, precipitation, adsorption, etc. Coagulation
T Technology > TA Engineering. Civil engineering > Stress corrosion
Divisions: Universiti Teknologi MARA, Shah Alam > Research Management Centre (RMC)
Journal or Publication Title: Scientific Research Journal
UiTM Journal Collections: UiTM Journal > Scientific Research Journal (SRJ)
ISSN: 1675-7009
Volume: 6
Number: 2
Page Range: pp. 1-11
Keywords: Al-Zn-Mg-Cu Alloy, Stress Corrosion Cracking, Precipitation, Retrogression, Re-aging
Date: 2009
URI: https://ir.uitm.edu.my/id/eprint/12919
Edit Item
Edit Item

Download

[thumbnail of AJ_DERAMAN R. SRJ 09 1.pdf] Text
AJ_DERAMAN R. SRJ 09 1.pdf

Download (635kB)

ID Number

12919

Indexing

|

Statistic

Statistic details