Reinforced concrete building design project: Project based learning (Case Study) / Hilmy Lazman Khairul Anuar

As conclusion, the objective of the project which is to design the main structural component in the building according to the Uniform Building By Law is achieved. From the project, we acknowledge the standards and specifications needed in order to follow the requirement of the UBBL and the local authority such as SPAN, Jabatan Bomba and Jabatan Kerja Raya. Then, from the planning process, the flow of the construction can be determined from the project schedule that was arranged by the software called as Microsoft Project. For the next stage, the structural key plan has been prepared by following the architectural drawing given by the architect. The structural key plan plan drawing is prepared in terms of engineering and safety purposes but still follow the objective and the specifications proposed earlier by the architects and the client such as the type materials used. For the following stage, the design and detailing work of the structural elements has been carried out. All of the design use the same concrete and steel strength .. For the slab design, the thickness of slab is determined by using the rule of thumb. Then, the parameter of the slab is obtained such as type of reinforcement which is Hl 0-200 and 30mm concrete cover .For the simply supported beam design, the main reinforcement used is 2H20 , the shear link used is H8-275,width of 250mm and overall depth is 750mm.For the continuous beam, the main reinforcement used is 2H20 and the main shear link is H8-275.For the foundation design, the size of footing is 2000mm x 2000mm x 500mm,the reinforcement used is 8H20.For the column design, the size used is 250mmx250mm,the reinforcement used is 4H20 and the shear link is H8-l 75.Lastly,the staircase 1 and 2 use the reinforcement of Hl 2-250.