Civil engineering design project technical / Alya Huda Yusairi

The goals of this project-based learning assignment for reinforced concrete buildings are to have students put into reality the essential concepts they have learnt in their civil engineering course. Through reading the drawings and proposing a double story building architectural plan to a private organization, I was able to learn about the actual situation of civil engineering work while working on this project. After that, we needed the soil investigation report to design the building. The structural key plan, which contains the ground floor plan, first floor plan, and roof floor plan, is being created throughout this project using AutoCAD. In addition, Eurocode 2 was employed to determine the permanent load and variable load. We were able to locate the building's beam and column during the development of the key plan. Additionally, during this project, the slab, staircase, and pad footing will all be identified. The manual calculations we created are then based on the design appendix, which must recommend the right size for the structures for them to be safe. Based on the findings of the soil study report, we must calculate the soil bearing capacity for this project. This is to recommend the right scale for the building to be safe. Based on the findings of the soil study report, we must calculate the soil bearing capacity for this project. This is a proposal for the required size of the building's pad footing. Additionally, we were able to recognize the staircase kinds in this building. The results of the manual calculations will be checked with Prokon, the design software we used, after they are finished. Based on a comparison between Prokon and manual computation, we can detect a small variation in the figures. We discovered that because this software can identify the proper value for each element, it was used during the civil engineering job. Lastly, when preparing for the project-based learning, we were able to use o understanding of soil engineering to address the civil engineering issue