Items where Subject is "Nanostructured materials"

A

Abdul Rasid, Ahmad Ameer (2018) Electrospraying of gold nanoparticles / Ahmad Ameer Abdul Rasid. (2018) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abdulah, Mohd Azli (2009) Electrical and optical properties of nanostructured titanium dioxide (TiO2) thin films annealed at different temperatures/ Mohd Azli Abdulah. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

C

Che Omar, Ahmad Firdaus (2022) Studies of BaTiO3/PVDF/rGO based nanocomposites for nanogenerator application / Ahmad Firdaus Che Omar. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

E

Elham, O.S.J and Sabari, N.A and Roslan, A.A and Mohamad Zamri, N.A.I Adsorption of heavy metal using mesoporous silica / Elham O.S.J ... [et al.]. [Student Project] (Unpublished)

H

Halimi, Siti Umairah (2017) Synthesis of carbon doped titanium dioxide (tio2) particles via electrospraying technique/ Siti Umairah Halimi. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Hamid, Farizah (2014) Effect of impact modifier to the performance of polyamide 6/high density polyethylene nanocomposite / Farizah Hamid. (2014) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

I

Ibrahim, Mohd Lokman (2019) Characterization and dissolution studies of salicylic acid loaded multi-walled carbon Nanotubes / Mohd Lokman Ibrahim. (2019) Science Letters (ScL), 13 (1). pp. 8-22. ISSN 2682-8626

Ibrahim, Muhammad Aidil and Tunku Kudin, Tunku Ishak and Hassan, Oskar Hasdinor and Ali, Ab Malik Marwan and Yahya, Muhd Zu Azhan (2019) Physical investigation of thionine-graphene nanocomposite synthesized using different concentrations of graphene oxide / Muhammad Aidil Ibrahim ... [et al.]. (2019) Gading Journal for Science and Technology, 2 (1). pp. 66-74. ISSN 2637-0018

Ishak, Saurdi (2018) Fabrication of nanocomposited Sn-doped ZnO/TiO₂ based dye-sensitized solar cells / Saurdi Ishak. (2018) PhD thesis, thesis, Universiti Teknologi MARA.

Ismail, Muhammad Farizwan (2019) Formation of carbon material on iron catalyst during reaction with the vapour produced from the pyrolysis of sewage sludge. (2019) [Student Project] (Unpublished)

Ismail, Muhammad Farizwan (2019) Formation of carbon material on iron catalyst during reaction with the vapour produced from the pyrolysis of sewage sludge: article. (2019) pp. 1-5.

Ismail, Rozaina (2020) Characterization and performance of nanocomposites elastomer incorporating carbon nanotubes and microcarbonyl iron fillers / Rozaina Ismail. (2020) PhD thesis, thesis, Universiti Teknologi MARA.

K

Karim, Zoheb and Adnan, Rohana (2012) Preparation, characterization and immobilization of silver nanoparticles with horseradish peroxidase: its future aspects in biosensor applications / Zoheb Karim and Rohana Adnan. (2012) In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

M

Masri, Mohd Nasron (2010) Photoresponse characteristics of aluminium doped zinc oxide nanostructure thin films / Mohd Nasron Masri. (2010) [Student Project] (Unpublished)

Mohd Agus, Rabiatul Adawiyah and Deraman, Siti Khatijah and A. Tajuddin, Nazrizawati (2021) Synthesis and characterization of two-dimensional (2D) nanosheet zinc aluminum layered double hydroxide (Zn/Al LDH) via an alkali-free route / Rabiatul Adawiyah Mohd Agus, Siti Khatijah Deraman and Nazrizawati A. Tajuddin. (2021) Science Letters (ScL), 15 (1). pp. 82-89. ISSN 2682-8626

Mohd Shah, Nor Adila (2017) Production of Santa Barbara Amorphous 15 (SBA-15) using extracted silica from fly ash / Nor Adila Mohd Shah. (2017) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Shah, Nor Adila and Hamzah, Fazlena (2017) Production of Santa Barbara Amorphous 15 (sba-15) using extracted silica from fly ash: article / Nor Adila Mohd Shah and Fazlena Hamzah. (2017) pp. 1-4.

Mohd Suah, Faiz Bukhari and Md Jani, Abdul Mutalib and Taib, Mohd Nasir (2006) An intelligent optical fibre Al(lll) sensor based on advanced materials-sol-gel & polyaniline-porous nanocomposite / Faiz Bukhari Mohd Suah, Abdul Mutalib Md Jani and Mohd Nasir Taib. (2006) [Research Reports] (Unpublished)

Mohd Yusoff, Amira and Md Raffe, Siti Noor Atiyah and Mohamad, Sarina and Yusof, Rizana (2025) Preparation and characterization of pectin-starch hydrogel modified with urea and lactic acid-based deep eutectic solvent for soil water retention / Amira Mohd Yusoff ... [et al.]. (2025) Scientific Research Journal, 22 (1): 13. pp. 243-265. ISSN 1675-7009

N

Ngadiman, Nur Lili Suraya (2022) Enhancement of Ta2O5 nanostructures properties via electrochemical anodization synthesis method and surface modification with gold nanoparticles for humidity sensing application / Nur Lili Suraya Ngadiman. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

R

Rajamanikam, Sharvien and Rajendran Royan, Nishata Royan and Ab Ghani, Mohd Hafizuddin and Ismail, Ismayadi and Nawang, Rosnah and Che Abdullah, Che Azurahanim (2024) Investigation on tensile properties of polylactide-nanoclay (PLA/ MMT) surface modification nanocomposites / Sharvien Rajamanikam ... [et al.]. (2024) Journal of Mechanical Engineering (JMechE), 21 (3): 4. pp. 63-75. ISSN 1823-5514 ; 2550-164X

S

Siti Noorbaini, Sarmin (2015) New environmentally lightweight building materials from hybrid inorganic polymer-wood particles / Siti Noorbaini Sarmin. (2015) In: Proceedings of Postgraduate Conference on Global Green Issues (Go Green), 7-8 October 2015, Dewan Kuliah Al-Khawarizmi Universiti Teknologi MARA Cawangan Perak.

W

Wan Ibrahim, Wan Muhammad Adli Mustaqim (2022) Portable sieve for greensand and cast Damascus steel knife / Wan Muhammad Adli Mustaqim Wan Ibrahim. (2022) [Student Project] (Submitted)

Z

Zulkefle, Habibah and Mohd Dahan, Rozana and Mamat, Mohamad Hafiz and Mahmood, Mohamad Rusop (2024) Nano-MgO and nanostructured ZnO/MgO films: topology, morphology and dielectric properties / Habibah Zulkefle ... [et al.]. (2024) Journal of Electrical and Electronic Systems Research (JEESR), 24 (1): 6. pp. 40-44. ISSN 1985-5389