Browse by Thesis Field of Study

Sidek Ali, Izzuddin Ali (2010) Computational fluid dynamic analysis on minichannel electronic cooling device / Izzuddin Ali Sidek Ali. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Khalid, Zaid (2010) Design of an iron nail holder / Zaid Khalid. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Ibrahim, Muhammad Zulfadli (2010) A study on the potential usage of recumbent tricycle among Malaysian population considering ergonomic aspect / Muhammad Zulfadli Ibrahim. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Kamarudin, Muhammad Zarif (2010) Development of cost efficient vision system for defects detection / Muhammad Zarif Kamarudin. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Zahuri, Zairee Ezzam (2010) The effect of cooling process after weld using tensile and impact tests of mild steel joint / Zairee Ezzam Zahuri. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Mohd Zain, Normuhaizah (2010) A study on the effect of mechanical properties and rheologycal behaviour of polyproplene reinforced montmorillonite / Normuhaizah Mohd Zain. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Wan Ahmad, Wan Muhd Adham (2010) Evaluation and analysis various types of welding imperfections collected from the steel fabricators / Wan Muhd Adham Wan Ahmad. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Suhaimi, Mohd Syafiq (2010) Hull form design of double stepped hull using CFD: a case study with a 15 meter fast patrol boat / Mohd Syafiq Suhaimi. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Ilias, Mohd Fahim (2010) Preliminary design of an automatic cooling system using solar photovoltaic (PV) system / Mohd Fahim Ilias. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Md Zailan, Mohd Fadhli Azizi (2010) Performance analysis proton exchange membrane fuel cell (PEMFC) stack by using test rig / Mohd Fadhli Azizi Md Zailan. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Tengku Hitam, Tengku Kamil Ariff (2010) Development of an actuator system for applying load for wing box static test / Tengku Kamil Ariff Tengku Hitam. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Mohd Zain, Normuhaizah (2010) A study on the effect of mechanical properties and rheological behaviour of polypropylene reinforced montmorillonite / Normuhaizah Mohd Zain. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Rahimi, Norzihan (2010) Preliminary design and fabrication of a stand alone solar photovoltaic (PV) system / Norzihan Rahimi. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Jamaluddin, Nur Fateha (2010) Influences of particle size in ignite time, burning rate, and ash produce of compaction on fibrous material / Nur Fateha Jamaluddin. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Wan Hassin, Wan Mohd Fahmi (2010) Simulation of high static low dynamic stiffness (HSLDS) using harmonic balances method / Wan Mohd Fahmi Wan Hassin. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Zakaria, Mohd Fahmi (2010) Computational fluid dynamics (CFD) study on the effects of 2008 and 2009 wing regulation by FIA on Formula 1 car for tandem conditions / Mohd Fahmi Zakaria. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Nik Soh, Nik Mohammad Sukri (2010) To investigate the effects of the depth of golf ball dimple to its trajectory using CFD / Nik Mohammad Sukri Nik Soh. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Tengku Bakry Shah, Tengku Syazwan (2010) Human behavior among motorcyclist: comparison between disc brake and drum brake of rear tire of motorcycle using hand brake type and leg brake type / Tengku Syazwan Tengku Bakry Shah. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abdul Kadir, Warhamni (2010) Development of a sensory system for a mechanical linked adult finger / Warhamni Abdul Kadir. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Nik Ibrahim, Nik Mohd Hanif (2010) Computational fluid dynamics (CFD) analysis of UiTM blended-wing-body (BWB) baseline-n UAV with canard deflection of -5 degree at 0.1 Mach number / Nik Mohd Hanif Nik Ibrahim. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Imus, Ridwan (2010) Design engineering solution for humidity problem faced by metrology lab / Ridwan Imus. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Jasmi, Rosidi (2010) Design of a sound insulator for food blender / Rosidi Jasmi. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Muin, Rosydi (2010) Study on noise monitoring at plant area / Rosydi Muin. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abu Bakar, Rushafinas (2010) Shoulder prosthesis stem design based on anthropometric measurement data for Asian population / Rushafinas Abu Bakar. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mat Zain, Mohd Fadhli (2010) Computational fluid dynamics (CFD) simulation of triple exposure solar oven / Mohd Fadhli Mat Zain. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Hashim, Addy Rizal (2010) The development on heat and eficiency characterization of quintuplet exposure box-type solar cooker / Addy Rizal Hashim. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Baru Meechang, Terence (2010) Development of a shape memory alloy actuation system for a laboratory finger prosthesis / Terence Baru Meechang. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Md Shah, Noraishah (2010) Study on mechanical properties and rheological behaviour of polypropylene reinforced palm oil empty fruit bunch / Noraishah Md Shah. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abdullah, Nor Akram (2010) A study of the effects of machining parameters on the surface roughness in the turning process / Nor Akram Abdullah. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Marhaban, Mohsin (2010) To obtain the optimum parameters for welding of aluminium using friction welding technique / Mohsin Marhaban. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ismail, Muhamad Iqbal (2010) Hull form design of single stepped hull using CFD a case study with a 15 meter fast patrol boat / Muhamad Iqbal Ismail. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Hamid, Muhamad Hairi (2010) Design and fabrication of mechanized welding traction system / Muhamad Hairi Hamid. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Yaacob, Muhamad Elmi (2010) Verification of performance and cost of mechanical cutting processes / Muhamad Elmi Yaacob. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mansor, Muhammad Bashir (2010) Control the temperature and humidity synchronously in operation theater / Muhammad Bashir Mansor. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Benjamin, Rayner (2010) To obtained the optimum parameters for welding of copper and carbon steel using friction welding technique / Rayner Benjamin. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Badiruddeen, Nik Ahmad Khalil (2010) Computational fluid dynamic (CFD) analysis of blended wing body (BWB) Baseline-II unmanned aerial vehicle (UAV) with canard setting angle of 10° at 0.1mach number / Nik Ahmad Khalil Badiruddeen. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ahmad Radzuki, Nazatol Shima (2010) Design for assembly (DFA) on sandwich toaster / Nazatol Shima Ahmad Radzuki. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Nik Azlan, Nik Hosni Iskandar (2010) The design of a mini hydro generator / Nik Hosni Iskandar Nik Azlan. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ramli, Nur Hamiza (2010) Analysis of cooling performance for air cooling channels of a PEM cell using CFD: inlet geometry design / Nur Hamiza Ramli. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Wan Ayoub, Wan Zulhilmi (2010) Simulation and optimization of pick and place robot operation / Wan Zulhilmi Wan Ayoub. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Razali, Hafiz Ikram (2010) Design evaluation of a juice extractor using design for assembly method / Hafiz Ikram Mohd Razali. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Zaharim, Ruzanna Inani (2010) Investigation on the effect of Kenaf dust on mechanical properties of automotive brake pad / Ruzanna Inani Zaharim. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Mat Deraseh, Mohd Zukarnan (2010) Comparison between the estimated and actual productivity for the fabrication of a steel framework / Mohd Zukarnan Mat Deraseh. (2010) Degree thesis, thesis, Universiti Teknologi MARA.