Items where Subject is "Chemical processing of wood"

Group by: Creators | Item Type
Number of items at this level: 80.

Article

Properties of three layer muf particleboard from bamboo (Gigantochloa Scortechinii) / Jamaludin Kasim. (2003) Universiti Teknologi MARA Cawangan Pahang, 1,2 (8). pp. 1-4. ISSN 0128-5599

Effects of bamboo density and chemical properties on the properties of particleboard produced from Giganfochloa Scortechinii / Jamaludin Kasim and Abd. Jalil Hj. Ahmad. (2005) Jurnal Gading, 9 (1). pp. 91-100. ISSN 0128-5599

Physical and mechanical properties of thermoplastic composite from oil palm trunk / Jamaludin Kasim …[et al.]. (2006) Jurnal Gading UiTM Pahang, 10 (1). pp. 69-76. ISSN 0128-5599

Mechanical and dimensional properties of bamboo (Gigantochloa Scortechinii) fiber - thermoplastic composite / Jamaludin Kasim, Veronica Sintan and Abd. Latif Mohmod. (2005) Jurnal Gading, 9 (1). pp. 131-138. ISSN 0128-5599

Book Section

Awapuhi – a pine cone ginger extract / Siti Nurul Atikah Abu Samah and Nor Azma Yusuf. (2022) In: Virtual-Melaka International Intellectual Exposition 2022 (VMIIEX 22). Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, pp. 77-79. ISBN 978-967-2846-04-8 (Submitted)

Monograph

Polycure (M) Sdn. Bhd. / Nurmiza Munirah Hassan Wong. (2022) Industrial Training. Faculty Of Chemical Engineering, Universiti Teknologi MARA, Johor. (Unpublished)

Conference or Workshop Item

Mechanical and physical properties of oriented strand board from kelempayan wood / Mohd Aizuddin Che Rosli and Wan Mohd Nazri Wan Abd Rahman. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Effects of varying particle size, resin and wax content on the properties of homogenous melamine urea formaldehyde particleboard from bamboo (Gigantochloa scortechinii) / Jamaludin Kasim, Abd. Jalil Ahmad dan Shaikh Abdul Karim Yamani. (2004) In: Prosiding KONAKA Konferensi Akademik 2004, 17-19 Disember 2004, Impiana Beach Resort, Cherating, Kuantan.

Properties of homogenous muf particleboard from bamboo (gigantochloa scortechinil) / Jamaludin Kasim and Abdul Jalil Ahmad. (2003) In: Prosiding KONAKA Konferensi Akademik 2003, 5-7hb Disember 2003, Holiday Villa Cherating, Kuantan.

Relationship of board density and resin contents towards the particleboard properties from weathered oil palm trunk / Jamaludin Kasim …[et al.]. (2013) In: Prosiding KONAKA Konferensi Akademik 2013, 28-29 Oktober 2013, Bukit Gambang Resort City, Gambang, Pahang, Malaysia.

Effect of particle size and resin content on leucaena leucocephala particleboard properties / Jamaludin Kasim …[et al.]. (2014) In: Prosiding KONAKA Konferensi Akademik 2014, 28 Oktober 2014, UiTM PAHANG.

Properties of single layer particleboard from oil palm trunk particles / Siti Zalifah Mahmud …[et al.]. (2009) In: UNSPECIFIED.

Properties of acacia mangium wcb in relation to particle size and additives (Na2Si03) / Mohamad Alif Aizat Mohd Azhar …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Influence of particle sizes on homogenous and heterogeneous wood cement board properties made from acacia mangium / Azlan Seraila and Shaikh Abdul Karim Yamani Zakaria. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Decay resistance between sapwood and heartwood of parashorea malaanonan / Mahmud Sudin and Razak Wahab. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Fibre morphology, physical and chemical properties of Gliricidia sepium / Shaikh Abdul Karim Yamani Zakaria, Jamaludin Kasim and Nik Aziz Nik Mat. (2004) In: Prosiding KONAKA Konferensi Akademik 2004, 17-19 Disember 2004, Impiana Beach Resort, Cherating, Kuantan.

Thesis

Effect of the density on the properties of particleboard from Kenaf core and Kelempayan (Neolamarckia spp.) particles / Ammar Imran Ab Malek. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Full vanity mirror with storage from pine wood and epoxy / Puteri Nurul Fatihah Abdul Rahim. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Review on effects different modifier towards formaldehyde emission, physical and mechanical properties of melamine urea formaldehyde and urea formaldehyde bonded particleboard / Mohammad Farhan Iskandar. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Live edge emerald green resin art side table / Nurul Basirah Md Ali. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Student Project

Effect of strand sizes and resins on oriented strand board using kelempayan / Muhamad Amir Hamzah A.Rahim. (2011) [Student Project] (Unpublished)

Properties of hybrid particleboard made from admixture material of Kelempayan, durian husk and oil palm frond in relation to different resin content / Norani Shuhada Abd Kadir. (2014) [Student Project] (Unpublished)

Mechanical and physical properties of particleboard from two different fast growing species / Ahmad Razmi Abdul Manan. (2013) [Student Project] (Unpublished)

The evaluation and comparison of properties of particleboard made from Kenaf / Nor Shuhada Abdullah. (2014) [Student Project] (Unpublished)

Properties of particleboard from Kenaf (hibiscus cannabinus) core and acacia (acacia mangium) / Azizul Arifin Abdullah Khir. (2012) [Student Project] (Unpublished)

Separable birdcage by using recycle materials (solid wood waste)/ Al-Aiman Al-Azmi. (2018) [Student Project] (Unpublished)

Properties of particleboard from wild acacia mangium: effect of particle size and board thicknesss / Siti Hazimah Awal Ud-Din. (2013) [Student Project] (Unpublished)

Effect of chemical composition in oil palm trunk towards to furniture manufacturing process/ Asyraf Aminuddin Bani Amin. (2011) [Student Project] (Unpublished)

Relationship of board density and resin contents towards the particleboard properties from weathered oil palm trunk / Muhamad Nasrulrahman Che Kar. (2013) [Student Project] (Unpublished)

Mechanical and physical properties on oriented strand board from kelempayan wood/ Mohd Aizuddin Che Rosli. (2011) [Student Project] (Unpublished)

Effect of particle size and resin content on leucaena leucocephala particleboard properties / Muhammad Adib Firdaus. (2014) [Student Project] (Unpublished)

Finishing: traditional and modern technique / Munirah Ghazali. (2012) [Student Project] (Unpublished)

Properties of particleboard from Buluh Minyak (Bambusa vulgaris) / Halimatulsaadiah Halim. (2013) [Student Project] (Unpublished)

Homogenous particleboard properties of Petai Belalang (leucaena leucocephala) wood in relation to resin content and particle size/ Muhammad Farhan Husin. (2014) [Student Project] (Unpublished)

Finishing properties of coffee table by using kelempayan (neolamarckia cadamba) / Hanis Afiqah Idrus. (2015) [Student Project] (Unpublished)

Assessment of mechanical properties based on different density of particleboard from sentang spp (azadirachta excelsa) / Siti Anis Aniha Isa. (2012) [Student Project] (Unpublished)

Finishing properties of polyurethane lacquer and nitrocellulose lacquer on Mengkulang (heritiera sp) / Khairunnazaty Ishak. (2014) [Student Project] (Unpublished)

Bending properties of finger jointed from oil palm lumber (OPL) / Izwan Ismail. (2012) [Student Project] (Unpublished)

Evaluation on the physical and mechanical properties of particleboard from Batai (Paraserianthes falcataria) / Noor Rehan Ismail. (2011) [Student Project] (Unpublished)

Kenaf core particleboard based on physical, mechanical and acoustic properties / Nur ‘Izzati Ismail. (2014) [Student Project] (Unpublished)

Oriented strand board from acacia mangium and neolamarckia cadamba (kelempayan) in relation to temperature and pressure / Farah Umirah Jamal Abdul Nasir. (2016) [Student Project] (Unpublished)

Properties of particleboard from admixture Petai Belalang (leucaena leucocephala) and Kenaf core (hibiscus cannabinus) / Khairul Azhar Johari. (2012) [Student Project] (Unpublished)

Properties of particleboard made from acacia species: effects of resin content and hot press temperature / Nur Atiqah Nabilah Johari. (2013) [Student Project] (Unpublished)

Mechanical and physical properties of particleboard made from oil palm empty fruit bunch / Mohamad Kamal Kamarudin. (2014) [Student Project] (Unpublished)

Properties of three-layer particleboard from rubberwood and leucaena leucocephala / Khairul Azelan Kapli. (2012) [Student Project] (Unpublished)

Properties of particleboard from leuceana leucocephala wood/ Noor Zaliani Khozan. (2015) [Student Project] (Unpublished)

Properties of rice husk particleboard for exterior use / Nur Liyana Aifa Mahammad Asri. (2013) [Student Project] (Unpublished)

Screw withdrawal properties of particleboard made from batai (Paraserianthes falcataria) species / Safura Mahat. (2011) [Student Project] (Unpublished)

Water resistance particleboard from weathered oil palm trunk / Fatihah Mamat. (2013) [Student Project] (Unpublished)

Properties of oriented strand board made from banana pseudo stem (Musa acuminate colla (AA Group) cv. 'Lacatan') / Abdul Hadi Masod. (2013) [Student Project] (Unpublished)

Properties of finger joint effect by diferrent types of adhesive and alignment / Muhammad Shahedie Mat Anuar. (2014) [Student Project] (Unpublished)

Machining properties of treated oil palm lumber (elaeis guineensis jacq.) / Syazana Mat Saipuddin. (2014) [Student Project] (Unpublished)

Properties of particleboard from leucaena leucocephala and acacia mangium/ Maznera Mat Yaakob. (2014) [Student Project] (Unpublished)

Properties of particleboard from sugarcane bagasse in relation to board density and resin content / Mazaihan Izzat Mazlan. (2014) [Student Project] (Unpublished)

Finishing properties of nitrocellulose (nc) on mersawa wood by steam treatment / Mazulizam Md Ali Hanapiah. (2013) [Student Project] (Unpublished)

Properties of particleboard from eucalyptus pellita and petai belalang (leucaena leucocephala)/ Azematul Asma Md Yatim. (2014) [Student Project] (Unpublished)

Properties of particleboard using treated and untreated sugarcane bagasse / Muhammad Sideq Md Yunos. (2014) [Student Project] (Unpublished)

Properties of particleboard made from recycle board and wood slabs / Ramli Mohamad Khanafiah. (2014) [Student Project] (Unpublished)

Properties of particleboard from acacia mangium and rice husks / Siti Sarah Mohd Ghani. (2014) [Student Project] (Unpublished)

Effect of resin content and species ratio on the properties of particleboard from leuceana spp and rubberwood/ Mohd Aizuddin Mohd Yusoff. (2011) [Student Project] (Unpublished)

The properties of particle board from oil palm frond / Nur Aqeela Mohd Yussof. (2016) [Student Project] (Unpublished)

Properties of particleboard from leucaena leucocephala in relation to varying particle size and resin content/ Faizatul Azma Mustafha. (2014) [Student Project] (Unpublished)

Properties of finger joint by different species and adhesive / Nik Muhammad Ashraf Nik Soh. (2014) [Student Project] (Unpublished)

Thermal conductivity of gypsum board in proportion to kenaf fiber and polyvinyl alcohol (PVA) / Nurul Nazwa Rahmat. (2016) [Student Project] (Unpublished)

Properties of particleboard from acacia mangium in relation to particle size/ Mohd Zaimy Ramli. (2015) [Student Project] (Unpublished)

Effect of particle size and resin on kelempayan particleboard/ Mohd Faizal Razali. (2011) [Student Project] (Unpublished)

Properties of particleboard from acacia species using different resin content and board density / Nur Amalina Razali. (2013) [Student Project] (Unpublished)

Properties of three layers hybrid particleboard from sawdust and acacia mangium / Mohamad Sahzeri Sa'at. (2012) [Student Project] (Unpublished)

Properties of particleboard from acacia mangium in relation to tree height portions/ Muhammad Badran Saleh. (2015) [Student Project] (Unpublished)

Properties of oriented strand board from Kelempayan and Sentang / Suhaini Suria. (2014) [Student Project] (Unpublished)

Properties on ceiling board of rice husk (Oryza sativa) / Zurina Talib. (2013) [Student Project] (Unpublished)

Withdrawal strength and physical properties of three layers hybrid particleboard / Mohd Hanafi Umar. (2012) [Student Project] (Unpublished)

Wettability of kelempayan (neolamarckia cadamba), sesenduk (endospernum diadenum) and ludai (sapium baccatum), using distilled water, urea formaldehyde and phenol formaldehyde/ Wan Normardiyana Wan Abdullah. (2011) [Student Project] (Unpublished)

Properties of wood plastic composites made from rubberwood sawdust / Wan Mohd Norsafizu Wan Mohd Nor. (2012) [Student Project] (Unpublished)

Properties of particle board from batai and petal belalang / Wan Nur Sheila Anis Wan Rafai. (2014) [Student Project] (Unpublished)

Properties of particleboard made from acacia mangium and oil palm trunk in relation to different resin content / Nor Ain Nadirah Yusoff. (2014) [Student Project] (Unpublished)

The study of suitability of coir fibres as wrapping paper / M.A.R Yusri ...[et al.]. [Student Project]

Physical and mechanical properties of three-layer particleboard from oil palm frond (OPF) / Norfazlina Zainal. (2011) [Student Project] (Unpublished)

Application of finishing system to multipurpose rack from Kelepayan species / Norhidayu Zakariya. (2014) [Student Project] (Unpublished)

Properties of particleboard from admixture Kenaf (hibiscus cannabinus l.) core and oil palm trunk (OPT) / Mohd Shah Fitri Zolkapli. (2013) [Student Project] (Unpublished)

This list was generated on Wed Nov 13 11:29:03 2024 UTC.