Items where Subject is "Photogrammetry"

Group by: Creators | Item Type
Jump to: A | E | I | J | K | M | N | O | R | S | W | Z
Number of items at this level: 46.

A

Abd Rahaim, Muhammad Hafizi (2018) Assessment of CDA and Morphlink-C Algorithms method in crack detection using [Multirotor DJ1 phantom 3] image / Muhammad Hafizi Abd Rahaim. (2018) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Abd Rashid, Firdaus (2022) Assessment of DEM generated by UAV photogrammetry for volume calculation / Firdaus Abd Rashid. (2022) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Abdul Hadi, Mohd Shafiq (2020) Assessment of orthophoto generated from UAV images in different geodetic projection / Mohd Shafiq Abdul Hadi. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Abdul Wahab, Nor Syamim (2018) Volume determination by same camera resolution using close range photogrammetry [CRP] technique / Nor Syamim Abdul Wahab. (2018) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Abdullah, Zakiah (2018) Application of close photogrammetry for explosion affected area analysis / Zakiah Abdullah. (2018) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Azri, Mohamad Fadhilah (2021) Reliability study of UAV photogrammmetry for slope maintenance in Naka, Kedah / Mohamad Fadhilah Azri. (2021) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

E

Eraman, Eman Emran (2023) Reconstruction of 3D models of artefact using LiDAR phone based for heritage documentation / Eman Emran Eraman. (2023) [Student Project] (Submitted)

I

Ibrahim, Suaibah (2020) Assessment of orthophoto generated from UAV images / Suaibah Ibrahim. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Ibrahim, Suaibah (2020) Assessment of orthophoto generated from UAV images / Suaibah Ibrahim. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

J

Jaafar, Jasmee (Associate Prof. Dr) (2004) Evaluation of Digital Surface Model (DSM) constructed using digital photogrammetry for mapping applications / Associate Prof. Dr Jasmee Jaafar. (2004) [Research Reports] (Unpublished)

Jamain, Mohamad Faris (2018) Accuracy assessment of 3D building height extraction from UAV images with different flying altitude of UiTM Perlis / Mohamad Faris Jamain. (2018) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

K

Kamal, Mohamad Hafizuddin (2021) Documentation of heritage building using digital close-range photogrammetry at Muzium Perak / Mohamad Hafizuddin Kamal. (2021) Degree thesis, thesis, Universiti Teknologi MARA, Perlis.

Khairul Annuar, Muizudin (2023) 3D modelling of Kota Kayang Cave using Close Range Photogrammetry (CRP) / Muizudin Khairul Annuar. (2023) [Student Project] (Submitted)

Khalid, Shafina (2024) Three-dimensional reconstruction using NeRF artificial intelligence technique / Shafina Khalid. (2024) [Student Project] (Submitted)

M

Ma'arof, Ismail (2017) Assessment of three-dimensional model generated using digital close-range photogrammetric method for heritage documentation applications / Ismail Ma'arof. (2017) PhD thesis, thesis, Universiti Teknologi MARA.

Madon, Dona Lowii and Abdul Samat, Raziq and Alias, Aidah (2019) Digital photogram: pengenalan teknik dan aplikasi baru dalam fotografi / Dona Lowii Madon, Raziq Abdul Samat dan Aidah Alias. (2019) Jurnal Inspirasi Seni Intelektual (I.S.I). pp. 26-33. ISSN 2637-0115

Mahasan, Mohamad Arham (2019) Determination of possible route for invaders at Kota Putra, Padang Terap using [UAV] image / Mohamad Arham Mahasan. (2019) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Mahat, Siti Safariah (2018) The reconstruction of tail bottom Dauphin Helicopter 9M-IGB using range photogrammetry / Siti Safariah Mahat. (2018) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Mohamad Ramli, Wan Farhana (2020) Development planning at the coastal area by using unmanned aerial vehicle (UAV) image in Kuala Perlis / Wan Farhana Mohamad Ramli. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Mohammad Hafi, Nurul Hidayah (2024) Three-dimensional modelling from spherical camera using Structure-from-Motion (SfM) photogrammetry for rock art / Nurul Hidayah Mohammad Hafi. (2024) [Student Project] (Submitted)

Mohd Asli, Mohammad Amin (2019) Monitoring and analysis part of river bank using unmanned aerial vehicle [UAV] at Terusan Besar, Jitra / Mohammad Amin Mohd Asli. (2019) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Mohd Maasom, Mohammad Ashraf (2020) Accuracy assesssment of agisoft photoscan and PIX4D mapper in orthophoto and dem production / Mohammad Ashraf Mohd Maasom. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Mohd Mokhtar, Munirah Radin and Abdul Wahab, Suriani Ngah (2021) Landslide susceptibility mapping using GIS approach / Munirah Radin Mohd Mokhtar and Suriani Ngah Abdul Wahab. (2021) In: Virtual Go-Green: Conference and Publication (V-GoGreen 2020), 29-30 September 2020, Universiti Teknologi MARA, Cawangan Perak Kampus Seri Iskandar.

Mohd Mokhtar, Munirah Radin and Husain, Mohd Najib and Che Kasim, Asmma’ (2021) A study on the low-cost Digital Elevation Model (DEM) surface measurement of landslide monitoring by close range photogrammetry / Munirah Radin Mohd Mokhtar, Mohd Najib Husain and Asmma’ Che Kasim. (2021) In: Virtual Go-Green: Conference and Publication (V-GoGreen 2020), 29-30 September 2020, Universiti Teknologi MARA, Cawangan Perak Kampus Seri Iskandar.

Mohd Nordin, Ahmad Nabil (2023) Accuracy assessment of 3D Model generated using photo acquired by smartphone for engineering object / Ahmad Nabil Mohd Nordin. (2023) [Student Project] (Submitted)

Mohd Patri, Muhamad Hafizuddin (2022) Differences of human foot print men and women / Muhamad Hafizuddin Mohd Patri. (2022) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Mohd Radzi, Muhammad Hariz Danial (2024) Comparison of multi view stereo and neural radiance field for photogrammetric processing application / Muhammad Hariz Danial Mohd Radzi. (2024) [Student Project] (Submitted)

Mohd Sakri, Siti Najwa (2018) Assessing an accuracy of [UAV mappping] in detail plan production / Siti Najwa Mohd Sakri. (2018) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Mohd Yusoff, Nur Amirah (2023) Quality assessment of 3D Model generated using various GCP distribution on smartphone acquired image / Nur Amirah Mohd Yusoff. (2023) [Student Project] (Submitted)

Muhammad, Muizzuddin (2024) Micro UAV flight parameters analysis in producing an accurate large scale topographic map / Muizzuddin Muhammad. (2024) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Mustafa, Nur Ezzatul Akmar (2020) Determination qibla direction of Batu Kapal based on digital surface model Batu Kapal / Nur Ezzatul Akmar Mustafa. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

N

Noor Azmin, Nurul Shafiqah Hazelin (2018) Assessment on 3D reconstruction of vehicle damage by using close range photogrammetry / Nurul Shafiqah Hazelin Noor Azmin. (2018) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Noor Hezam, Nuraizuddin Hakim (2023) Optimization of structure-from-motion orientation for topographical mapping / Nuraizuddin Hakim Noor Hezam. (2023) [Student Project] (Submitted)

O

Othman, Siti Nurshahirah (2019) Suitability of UAV photogrammetry as a platform in topographic mapping / Siti Nurshahirah Othman. (2019) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Ozaimidi, Mohammad Shahrul Nizam (2021) Degree of closeness analysis of orthophoto obtained from UAV photo with NDCDB in Naka, Kedah / Mohammad Shahrul Nizam Ozaimidi. (2021) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

R

Rosdi, Faqhyiah (2022) Feasibility study of the control point distribution design in implementation UAV photogrammetric map production / Faqhyiah Rosdi. (2022) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

S

Saidin, Muhammad Alif (2020) Assessment of unmanned aerial vehicle (UAV) orthophoto images based on different dense cloud density / Muhammad Alif Saidin. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Shamsuddin, Mimi Sahada (2020) The suitability of the orthophoto generated from unmanned aerial vehicle for updating cadastral map and demarcate the boundary mark position / Mimi Sahada Shamsuddin. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Shapiee, Sharoanas (2023) Quality assessment of 3D model generated from different image overlap / Sharoanas Shapiee. (2023) [Student Project] (Submitted)

Shukri, Norshazwani (2024) The accuracy assesstment of photogrammetry product derived from DJI Zenmuse L1 in mapping / Norshazwani Shukri. (2024) [Student Project] (Submitted)

Sobri, Intan Shahirah (2020) Assessment of digital terrain model (DTM) generate from UAV aerial image using photogrammetric image processing module / Intan Shahirah Sobri. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

W

Wan Abdul Rahman, Wan Nur Farah Edlin (2021) Visualization and preservation of cultural heritage using close range photogrammetry at Masjid Sultan Brunei / Wan Nur Farah Edlin Wan Abdul Rahman. (2021) Degree thesis, thesis, Universiti Teknologi MARA, Perlis.

Wan Ghazali, Wan Nurdayini Batrisyia (2024) Comparison of UAV flying height parameter for crack detection applications / Wan Nurdayini Batrisyia Wan Ghazali. (2024) [Student Project] (Submitted)

Z

Zaidi, Mohamad Syazwi (2020) Assessment of mapping production between fixed-wing and multi-rotor UAV platform / Mohamad Syazwi Zaidi. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Zulkafli, Muhammad Mustaqim (2022) Accuracy assessment of Agisoft photoscan software in Modelling Kerbau Cave / Muhammad Mustaqim Zulkafli. (2022) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Zulkarnain, Nurul Hidayah (2019) Target marker as control point in crime scene modeling by using close range photogrammetry / Nurul Hidayah Zulkarnain. (2019) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

This list was generated on Wed Jul 23 19:32:38 2025 UTC.