Items where Subject is "Polyethylene"

A

A., Nazree and H.A., Mustaffa and H.A., Sahrim and M.S., Junaidah and Y., Ahmad Nazlim (2004) Sifat magnet komposit getah asli termoplastlk berpengisi kobalt / A.Nazree …[et al.]. (2004) In: STSS 2004 : SAINS TEKNOLOGI JILID 1, 31 MEI – 1 JUN 2004, HOTEL VISTANA, KUANTAN, PAHANG.

Abd Karim, Siti Fatma (2023) Characterization and disintegration performance of thermoplastic starch-based film incorporated with aloe vera gel and polyethylene / Siti Fatma Abd Karim. (2023) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Abd Karim, Siti Fatma and Jai, Junaidah and Ku Hamid, Ku Halim and Abd Jalil, Abdul Wafi (2020) Effect of crude palm oil, Aloe vera, glycerol, and starch on characteristics and mechanical properties of polyethylene film / Siti Fatma Abd Karim … [et al.]. (2020) Malaysian Journal of Chemical Engineering and Technology (MJCET), 3 (1). pp. 16-24. ISSN 2682-8588

Abd Karim, Siti Fatma and Jai, Junaidah and Ku Hamid, Ku Halim and Abdul Jalil, Abdul Wafi (2020) Characteristics and mechanical properties changes due to incorporation of aloe vera in polyethylene-based film / Siti Fatma Abd Karim …[et al.]. (2020) Scientific Research Journal, 17 (2). pp. 62-79. ISSN 2289-649X

Abdul Rahman, Norhana (2019) Influence of polyethylene terephthalate (PET) and crumb rubber on the properties of concrete / Norhana Abdul Rahman. (2019) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Abdullah, Saifollah (1988) Polimer elektret / Saifollah Abdullah. (1988) GADING Majalah Akademik ITM Cawangan Pahang, 1 (2): 1. pp. 1-11.

Abu Kassim, Mohd Nor Fadli (2009) Carbon fiber encapsulation for packaging biomedical Lab on Chip components: article / Mohd Nor Fadli Abu Kassim. (2009) pp. 1-6.

Alias, Azwin (2000) Manufacture of bamboo thermoplastic composite using polyethylene as matrix / Azwin Alias. (2000) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Aref, Aina and Said, Salihin and Zainy, Fadhilah and Mustafa, Haikal and Tan, Suhee and Wahit, Mat Uzir (2018) Mechanical properties of PP/RPET blends and PP-g-MAH as compatibilizer / Aina Aref ... [et al.]. (2018) [Student Project] (Unpublished)

B

Badrol Hisham, Anis Amira (2022) Photocatalytic activity of zinc oxide [ZnO] / low density polyethylene [LDPE] coated with silver under visible light : The efficiency of dipping and hand lay-up technique / Anis Amira Badrol Hisham. (2022) [Research Reports] (Submitted)

Bahari, Shahril Anuar and Yahya, Mohd Khairi and Abu Kassim, Masitah and Muhammad, Khairul Safuan and Baharom, Rahimi (2011) Electrical resistivity and flexural strength of plastic composites reinforced with pineapple leaf particles / Shahril Anuar Bahari ... [et al.]. (2011) Scientific Research Journal, 8 (2). pp. 1-11. ISSN 1675-7009

D

Din, Siti Nor and Ahmad Bokhari, Jamilah and Rosni, Nursyarafana and Hashim, Faiezah and Ahmad, Zuliahani (2023) Comparative study of mechanical and physical properties of rice husk filled polyethylene waste composites / Siti Nor Din … [et al.]. (2023) Scientific Research Journal, 20 (2): 7. pp. 101-113. ISSN 1675-7009

H

Hakimi Azizan, Muhammad Izzat (2020) Utilization of recycle polyethene (PE) blend with various corn starch loading / Muhammad Izzat Hakimi Azizan. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Hassan, Arba' at and Sokro, Maimunah (2004) A scenario on plastic shopping bags: Issues continue ... / Arba' at Hassan and Maimunah Sokro. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

J

Jelani, Norfakhriah (2019) Neutralization of naphthenic acid from petroleum crude oil by using cerium oxide catalyst and 2-methylimidazole in polyethylene glycol / Norfakhriah Jelani. (2019) [Student Project] (Unpublished)

K

Kassim Shaari, Norin Zamiah and Bairik, Mazlan and Jai, Junaidah (2020) Effect of different loading low density polyethylene (LDPE) on thermal and mechanical properties of Tapioca starch-based plastic composite / Norin Zamiah Kassim Shaari, Mazlan Bairik and Junaidah Jai. (2020) Malaysian Journal of Chemical Engineering and Technology (MJCET), 3 (1). pp. 25-28. ISSN 2682-8588

Kassim Shaari, Norin Zamiah and Taha, Ahmad Redha and Hanipah, Suhaiza Hanim (2020) Composite from high density polyethylene (HDPE) reinforced with rice husks (Oryza sativa): Preparation and mechanical property / Norin Zamiah Kassim Shaari, Ahmad Redha Taha and Suhaiza Hanim Hanipah. (2020) Malaysian Journal of Chemical Engineering and Technology (MJCET), 3 (2). pp. 25-29. ISSN 2682-8588

Khairi, Hanif and Ibrahim, Marzuki (2006) Penghasilan produk kraf berteraskan plastik kitar semula HDPE / Hanif Hj. Khairi , Prof. Madya Dr. Marzuki Hj. Ibrahim. (2006) [Research Reports] (Submitted)

M

Mohamad, Nazatul Nabila (2020) Biodegradation of low-density polyethylene (LDPE) mixed with corn strach by aspergillus niger, rhizopus. oryzae and their biofilm / Nazatul Nabila Mohamad. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Mohamad, Nazatul Nabila and Razali, Zainab and Sarip, Muhammad Naiman and Kamaruddin, Sharir Aizat and Abdullah, Shafinas and A Hamid, Huzaifah and Ahmad Nasir, Nor Atikah Husna (2021) Comparison on biodegradation of low-density polyethylene (LDPE) mixed with corn starch by A. Niger, R. Oryzae and their biofilm / Nazatul Nabila Mohamad … [et al.]. (2021) Gading Journal of Science and Technology, 4 (2). pp. 10-19. ISSN 2637 – 0018

Mohamad Rasol, Siti Najwa (2020) Adhesion and corossion properties of polyester filled calcium gluconite via immersion in salt solution as primer coatings application / Siti Najwa Mohamad Rasol. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Mohd Ayob, Nurul Atiqah (2018) Analysis of fluted natural fibre reinforced high density polyethylene roofing panel / Nurul Atiqah Mohd Ayob. (2018) In: THE DOCTORAL RESEARCH ABSTRACTS. IGS Biannual Publication, 14 . Institute of Graduate Studies, UiTM, Shah Alam.

Mohd Suhaimi, Puteri Nursyaziyana Farhana and Md Fadzil, Nurul Anisa and Mohd Zohari, Nur Fatin Nabilah (2024) Replastiseat: folding picnic stool from recycled HDPE. (2024) In: Proceeding for International Undergraduates Get Together 2024 (IUGeT 2024) Undergraduates’ Digital Engagement Towards Global Ingenuity. 2nd Edition, November, Universiti Teknologi MARA, Perak.

Mohd Supion, Nurzafirah (2024) Modelling and profit maximization of low-density polyethylene in industrial high pressure tubular reactor / Nurzafirah Mohd Supion. (2024) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Yazed, Muhammad Noor Afiq and Mohd Fadzil, Nor Fatin Shazlin and Esa, Muhammad Ilmam and Zaini, Muhammad Amiruddin and Rashidi, Ahmad Ramli Thermal and impact properties of HDPE/ Sayong clay / Muhammad Noor Afiq Mohd Yazed ... [et al.]. [Student Project]

Muhammad Alfian, Muhammad Amirul Nazmi (2023) Determination of plastic pollution and its degradation in soil at chili fertigation area / Muhammad Amirul Nazmi Muhammad Alfian. (2023) [Student Project] (Submitted)

Muhammad Redza, Rosman and Norishahaini, Mohamed Ishak (2015) Concrete compressive strength development when polyethylene terephthalate partially replaces sand / Muhammad Redza Rosman and Norishahaini Mohamed Ishak. (2015) In: Proceedings of Postgraduate Conference on Global Green Issues (Go Green), 7-8 October 2015, Dewan Kuliah Al-Khawarizmi Universiti Teknologi MARA Cawangan Perak.

N

Nasir, Nur Nadia and Othman, Siti Amira (2021) Corn-based bioplastic as seedling bag / Nur Nadia Nasir and Siti Amira Othman. (2021) In: International Exhibition & Symposium on Productivity, Innovation, Knowledge, Education & Design (i-SPiKe 2021). (Submitted)

NgaJib, K. and Said, C.M.S. and Tahir, H. and Din, M.R.M. (2004) Some studies on the physical properties and degradability of tapioca and corn starch low density polyethylene blends / K.NgaJib … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Nizam, Muhammad Ikhwan (2022) Molecular dynamics simulation on the adsorption behaviour of ibuprofen onto polyethylene microplastic / Muhammad Ikhwan Nizam. (2022) [Student Project] (Unpublished)

R

Rejab, M.R.M and Tarmidi, N.U.A. and Zuki, N.M. and Noor, M.M. (2008) Strain rate effects of polymeric foam cores under compressive loading / Rejab, M.R.M. …[et al.]. (2008) In: Proceedings STSS 2008 Broadening Horizons Through Research Science and Technology, 3 – 4 June 2008, M.S Garden Hotel Kuantan, Pahang.

Rusdi, Muhammad Aqeel (2017) Effect of carburizing time on mechanical properties of fe-24mn steel / Muhammad Aqeel Rusdi. (2017) [Student Project] (Unpublished)

S

Sim, Lai Har and Chan, Chin Han (2006) Crystallization and melting behaviour of polymer blends comprising polyacrylate and poly(ethylene oxide) / Sim Lai Har and Chan Chin Han. (2006) [Research Reports] (Unpublished)

Sim, Lai Har and Chan, Chin Han and Kammer, Hans-Werner and Hashifudin, Amirah (2013) Phase behaviour and morphology in blends of polyether and polyacrylate with the addition of lithium salt / Assoc. Prof. Dr. Sim Lai Har … [et al.]. (2013) [Research Reports] (Unpublished)

W

Wan Omar, Wan Siti Atikah and Jamil, Zadariana and Md Isa, Nurun Nadhirah and Abdullah, Nur Suraya and Wan Ismail, Wan Hanisah (2010) Preliminary study on biogas production from organic kitchen waste degradation / Wan Siti Atikah Wan Omar …[et al.]. (2010) In: Prosiding KONAKA Konferensi Akademik 2010, 8-9 Disember 2010, UiTM PAHANG.

Z

Zakaria, Nurhidayah (2020) Biodegradation of low-density polyethylene (LDPE) mixed with potato starch by Aspergillus niger rhizopus oryzae and their biofilms / Nurhidayah Zakaria. (2020) Degree thesis, thesis, Universiti Teknologi MARA, Perlis.