Items where Subject is "Polymers and polymer manufacture"

A

Ab Wahab, Muhammad Azizi (2019) Physical properties of thermoplastic made from tacca leontopetaloides starch. (2019) [Student Project] (Unpublished)

Ab Wahab, Muhammad Azizi and Noor Ismail, Kamariah (2019) Physical properties of thermoplastic starch made from tacca leontopetaloides extract: article. (2019) pp. 1-3.

Abd Aziz, Noor Zuhaira (2017) Characterization and rheological properties of hybrid fillers filled high density polyethylene bio-composite. (2017) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Abd Aziz, Syazwani (2019) Effect of copolymer maleic anhydride grafted polypropylene (MAGPP) in wood composite of cellulose from oil palm frond as a filler / Syazwani Abd Aziz. (2019) [Student Project] (Unpublished)

Abd Hamid, Muhamad Afiq (2019) Evaluation of viscoelastic properties of OPMF biocomposites. (2019) [Student Project] (Unpublished)

Abd Hamid, Muhamad Afiq and Hanipah, Suhaiza Hanim (2019) Evaluation of viscoelastic properties of OPMF biocomposites: article. (2019) pp. 1-4.

Abd Karim, Siti Fatma and Jai, Junaidah and Abdol Aziz, Rabiatul Adawiyah and Maqsood-Ul-Haque, Siti Noor Suzila and Ku Hamid, Ku Halim and Mulana, Farid (2024) Production of thermoplastic starch-aloe vera gel film embedded with polyethylene for improved tensile strength and water absorption / Siti Fatma Abd Karim ... [et al.]. (2024) Journal of Mechanical Engineering (JMechE), 21 (3): 6. pp. 93-107. ISSN 1823-5514 ; 2550-164X

Abd Karim, Siti Rozana (2017) Miscibility, conductivity and intermolecular interaction studies of poly(ethylene oxide) and poly(methyl methacrylate) blend based nanocomposite polymer electrolytes / Siti Rozana Abd Karim. (2017) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Abd Rahman, Hasrizal (2021) Effect of hydrolyzed polyacrylamide (HPAM) polymer towards microbiological induced corrosion (MIC) bacteria growth and corrososion rates / Hasrizal Abd Rahman. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

Abd Wahab, Mohamad Adib Adam (2017) Optimization of injection molding parameter in processing polypropylene using Taguchi method / Mohamad Adib Adam Abd Wahab. (2017) [Student Project] (Unpublished)

Abd Wahid, Mohd Faiz (2014) Effect of outdoor exposure on colour and the physical properties of non coated and coated polyester tent / Mohd Faiz Abd Wahid. (2014) Degree thesis, thesis, Universiti Teknologi MARA.

Abdul Aziz, Azlira (2005) Notched impact strength of fibre - reinforced polymer (FRP) composites / Azlira Abdul Aziz. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

Abdul Aziz, Nurul Faiizin (2018) Strength and durability of compression moulded high filler loading kenaf core and bast fibre particulate reinforced polyethylene composite / Nurul Faiizin Abdul Aziz. (2018) In: The Doctoral Research Abstracts. IPSis Biannual Publication, 13 (13). Institute of Graduate Studies, UiTM, Shah Alam.

Abdul Latif, Famiza (2010) Preparation and characterization of radiated polymers for various electrochemical applications / Dr. Famiza Abdul Latif. (2010) [Research Reports] (Unpublished)

Abdul Maleka, Naqibah (2019) Polymerization of Lactide to Poly (Lactic Acid): effect of initiators. (2019) [Student Project] (Unpublished)

Abdul Maleka, Naqibah and Ibrahima, Norliza (2019) Polymerization of Lactide to Poly (Lactic Acid): effect of initiators: article. (2019) pp. 1-5.

Abdul Manaf, Muhamad Rezza and Mohamed Hashim, Siti Raihana and Kamarudin, Surianajiha and Rashidi, Ahmad Ramli (2018) Mechanical properties of tin slag filled polyester composites / Muhamad Rezza Abdul Manaf ... [et al.]. (2018) [Student Project] (Unpublished)

Abdul Ra'of, Amirah Raihan (2009) Antimicrobial activities of Malaysian medicinal plants / Amirah Raihan Abdul Ra'of. (2009) [Student Project] (Unpublished)

Abdul Samad, Muhammad Nur Sidek (2019) Evaluation the degree of grafting on OPMF, SiO₂ biocomposite. (2019) [Student Project] (Unpublished)

Abdul Samad, Muhammad Nur Sidek and Hanipah, Suhaiza Hanim (2019) Evaluation the degree of grafting on OPMF, SiO₂ biocomposite: article. (2019) pp. 1-4.

Abduljan, Siti Zubaidah (2018) Effect of HA content to the thermal behaviour and crystallinity of PCL/HA composite / Siti Zubaidah Abduljan. (2018) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abdullah, Asiah and Md. Yatim, Amir Hashim and Samsuri, Azemi and Md. Som, Fauzi (2004) Sulphur vulcanization of NR latex: reducing chemical residues in NR latex products part 1 / Asiah Abdullah … [et al.]. (2004) [Research Reports] (Unpublished)

Abdullah, Muhamad Fakhrul Izat (2016) Debinding and sintering study of injection moulded M2 high speed steel using binder waste plastic binder system / Muhamad Fakhrul Izat Abdullah. (2016) [Student Project] (Unpublished)

Abdullah, Noor Adilla (2019) Characteristics of various hydrogel for gas adsorption purposes. (2019) [Student Project] (Unpublished)

Abdullah, Noor Adilla and Talib, Mdm Norhayati (2019) Characteristics of various hydrogel for gas adsorption purposes: article. (2019) pp. 1-8.

Abu Seman, Nur Hanani (2020) Optimization of microcrystalline cellulose (MCC) isolated from rice husk (RH) as reinforcement filler in polylactic acid (PLA) biocomposite / Nur Hanani Abu Seman. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Adam Malek, Afiqah (2017) Mechanical properties of cenosphere (0-40%) filled polypropylene composite. (2017) [Student Project] (Unpublished)

Adam Malek, Afiqah and Vargis, Christina (2017) Mechanical properties of cenosphere (0-40%) filled polypropylene composite: article. (2017) pp. 1-7.

Ahmad, Ainie Asyikin and Yusof, Faridah and Abdul Rahim, Ahmad Nazree and Shahari@Ansari, Khater Sharifa and Ahmad Barkat, Anumsima (2008) Optimizing the conditions for devulcanization of rubber waste by Thiobacillus Ferroxidans / Ainie Asyikin Ahmad … [et al.]. (2008) In: Proceedings STSS 2008 Broadening Horizons Through Research Science and Technology, 3-4 June 2008, M.S Garden Hotel Kuantan, Pahang.

Ahmad, Anis Salwa (2017) Effect of polyurethane insole on standing using foot pressure measurement and finite element analysis / Anis Salwa Ahmad. (2017) Masters thesis, thesis, Universiti Teknologi MARA.

Ahmad Idrus, Nurul Ashikin (2017) Formation of thin film nanofibre of polyacrylic acid (PEO) - carboxymethylcellulose (CMC) – polyethylene oxide (PEO) by using electrospinning technique. (2017) [Student Project] (Unpublished)

Ahmad Idrus, Nurul Ashikin and Abu Bakar, Noor Fitrah (2017) Formation thin film nanofibre of polyacrylic acid (PAA) -carboxymethylcellulose (CMC)-polyethylene oxide (PEO) using electrospinning technique: article. (2017) pp. 1-5.

Ahmad Sazali, Siti Fadzlinah and Sharudin, Rahida Wati (2017) Moisture and solvent uptake in various types of rubber: article. (2017) pp. 1-5.

Ali, Siti Zalina (2017) Evaluation of Polyethersulfone- based filtration performance with the presence of antifoam agent. (2017) [Student Project] (Unpublished)

Ali, Siti Zalina and Mohamad Pauzi, Syazana (2017) Evaluation of Polyethersulfone- based filtration performance with the presence of antifoam: article. (2017) pp. 1-4.

Alias, Norhatikah (2017) Waste cooking oil - based polyurethane compositepolymer electrolytes : The effect of carboxymethyl cellulose as bio filler / Norhatikah Alias. (2017) [Student Project] (Unpublished)

Amarudin, Muhamad Akmal (2017) Mechanical properties of lightweight material composite-polyurethane reinforced with kenaf core particles. (2017) [Student Project] (Unpublished)

Amarudin, Muhamad Akmal and Abu Bakar, Noor Fitrah (2017) Mechanical properties of lightweight composite: polyurethane reinforced with kenaf core particles: article. (2017) pp. 1-7.

Anuar, Ani Amanina and Kamardin, Ana Syahidah and Kamardin, Nur Kamarliah and Yusof, Ya’akob and Zubair, Ahmad Faiz and Hemdi, Abdul Rahman and Yahaya, Mohamad Irwan (2025) Investigating the influence of print settings on PLA filament using the Espresso F220 3D printer / Ani Amanina Anuar ... [et al.]. (2025) Scientific Research Journal, 22 (Jan): 3. pp. 37-53. ISSN 1675-7009

Anuar Othman, Muhammad and Mustapa, Ana Najwa (2019) Fabrication of biopolymer wound dressing by solvent casting technique: article. (2019) pp. 1-8.

Ayub, Nor Shira (2019) Evaluation and benefits of physico-chemical properties of physalis minima linn plant for food addictive. (2019) [Student Project] (Unpublished)

Ayub, Nor Shira and Che Radzi, Nurhaslina (2019) Evaluation and benefit of physico-chemical properties of physalis minima linn plant for food addictive: article. (2019) pp. 1-5.

Ayub, Siti Fadzilah and Nazir, Khuzaimah and Aziz, Ahmad Fairuz and Saaid, Siti Irma Yuana and Yahya, Muhd Zu Azhan and Ali, Ab Malik Marwan (2015) Ionic conductivity of MG30-PEMA blend solid polymer electrolyte / Siti Fadzilah Ayub … [et al.]. (2015) Scientific Research Journal, 12 (2). pp. 84-93. ISSN 1675-7009

Azhari, Mohd Farhan and Hilman, Mohamad Shafek and Abdullah, Meilina Ong and Abdul Masani, Mat Yunus and Shaharuddin, Noor Azmi and Chong, Yu Lok Yusuf (2024) Genetic engineering of lignin biosynthesis to enhance plant traits: applications in bioenergy, agriculture, and industry- a review. (2024) GADING (Online) Journal of Science and Technology, 7 (2): 9. pp. 73-84. ISSN e-ISSN 2637-0018

Aziz, Ahmad Fairoz and Badrudin, Fadlul Wafi and Hussin, Nur Hafiz and Ali, Ab Malik Marwan (2024) Influence of 6ppd on thermal aging and ionic conductivity of mg30 polymer electrolytes. (2024) GADING (Online) Journal of Science and Technology, 7 (2): 8. pp. 63-72. ISSN e-ISSN 2637-0018

Azizul Rahman, Farah Nordyana (2017) The physical and mechanical properties of rice husk/ recycled plasticised polyvinyl chloride compression moulded composite at various filler loadings and particle sizes / Farah Nordyana Azizul Rahman. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Azmi, Mohd Afnan (2009) Synthesis and characterization of interpenetrating polymer network base on PVA/AAM / Mohd Afnan Azmi. (2009) [Student Project] (Unpublished)

Azmi, Norsaidatul Amira (2019) Effect of zinc oxide (ZnO) nanofiller on the ionic conductivity of carboxymethyl cellulose – LiTFSI solid polymer electrolyte / Norsaidatul Amira Azmi. (2019) [Student Project] (Unpublished)

Azri, Muhammad Ridhwan (2019) Tensile, flow and thermal properties of biodegradable PLA/Kenaf fibre composite. (2019) [Student Project] (Unpublished)

Azri, Muhammad Ridhwan and Sharudin, Rahida Wati and Mohamed, Rahmah (2019) Tensile, flow and thermal properties of biodegradable PLA/Kenaf fibre composite: article. (2019) pp. 1-8.

B

Baharudin, Adzrie and Ahmad, Zuliahani and Anuar, Ayu Azellia and Azmani, Nur Dina Adlina and Mura, Angelene Betsy and Rustam, Siti Hana Humaira and Azhar, Mohamed Syaheen and Din, Siti Nor (2025) Characterization, physicomechanical and corrosion properties of reinforced microcrystalline cellulose treated silane unsaturated polyester primer coatings / Adzrie Baharudin ... [et al.]. (2025) Scientific Research Journal, 22 (1): 4. pp. 67-81. ISSN 1675-7009 (In Press)

Bapokutty, Omar (2006) Fatigue behaviour of a polymer concrete with and without added polyester fibre / Omar Bapokutty. (2006) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

C

Chan, Chin Han (2006) Preliminary investigations in the synthesis of epoxidized natural rubber based conducting polymer / Chan Chin Han. (2006) [Research Reports] (Unpublished)

Che Balian, Siti Rudhziah and Mat Fadzil, Aida Fazliza and Muhammad, Fadiatul Hasinah and Muda, Norhafiza and Mohamed, Nor Sabirin and Mohamed, Prof. Dr. Nor Sabirin (2013) Electrochemical studies of blend polymer electrolytes based on PVDF HFP/PEMA for Proton Battery / Siti Rudhziah Che Balian … [et al.]. (2013) In: RIID 2013: Optimizing Innovation for Global Commercialization Research, Invention, Innovation Design. Division of Research, Industrial Linkages and Alumni, UiTM Cawangan Melaka, Alor Gajah, Melaka, p. 13. ISBN 978-967-0637-02-0 (Submitted)

Che Isa, Nik Norziehana (2018) Surface properties and antimicrobial performance of copper coatings electrodeposited on 304 stainless steel / Nik Norziehana Che Isa. (2018) In: THE DOCTORAL RESEARCH ABSTRACTS. IGS Biannual Publication, 14 . Institute of Graduate Studies, UiTM, Shah Alam.

Che Jamil, Fatin Najwa (2017) The effect of heat energy on gelation point of silicone rubber. (2017) [Student Project] (Unpublished)

Che Jamil, Fatin Najwa and Sharudin, Rahida Wati (2017) The effect of heat energy on gelation point of silicone rubber: article. (2017) pp. 1-6.

E

Ery Sudirman, Muhammad Fadhil Aiman (2018) Characterization and optimization of hydrogel biochar from sawdust by using research surface methodology / Muhammad Fadhil Aiman Ery Sudirman. (2018) [Student Project] (Unpublished)

F

Fauzi, Farah (2019) Conductivity, light responsive and thermal behavior of 4-methoxy- 4oxyazobenzene decyl methacrylate polymer membrane. (2019) [Student Project] (Unpublished)

Fauzi, Farah and M. Alauddin, Sakinah (2019) Conductivity, light responsive and thermal behavior of 4-methoxy-4-oxyazobenzene decyl methacrylate polymer membrane: article. (2019) pp. 1-4.

G

Gupta, Sukesh and Ul Haq, Mir Irfan and Mohan, Sanjay and Anand, Ankush and Raina, Ankush and Dutta, Varun and Vohra, Karan and Kumar, Rajiv (2019) Evaluation of mechanical properties of ramie/banana reinforced hybrid composites / Sukesh Gupta ... [et al.]. (2019) Journal of Mechanical Engineering (JMechE), SI 8 (1). pp. 95-104. ISSN 18235514

H

Hamid, Husnani (2020) Evaluation of the tensile properties for polypropylene composite – a finite element and mechanic studies / Husnani Hamid. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Hamzah, Ahmad Sazali and Shaameri, Zurina and Muhammat, Mohd Fazli and Jumali, Nor Saliyana (2010) Frgs top-down novel advanced organic materials: polyimides (pi) & poly (p-phenylenevinylene) (ppv) project 1: syntheses of new polymeric materials. (2010) [Research Reports] (Unpublished)

Hanif Zamri, Mohd Zul (2020) The effect of filler content on properties of clamshell filled polyester composites / Mohd Zul Hanif Zamri. (2020) [Student Project] (Unpublished)

Haron, Muhamad Faizal (2017) Fabrication and characterization of jackfruit seed powder and polyvinyl alcohol blend as biodegradable plastic / Muhamad Faizal Haron. (2017) [Student Project] (Unpublished)

Haroni, Norzarina (2004) Slow crack growth of polymer mixed concrete under constant load / Norzarina Haroni. (2004) Degree thesis, thesis, Universiti Teknologi MARA.

Harun, Nurhana Ilmira and Sheikh Abdul Aziz, Siti Sumaiyah and Salleh, Nunshaimah and Senawi, Syamsir Akmal and Hashim, Azhan and Ali, Abdul Malik Marwan and Yahya, Muhd Zu Azhan (2014) A review on classification, types, and properties of humidity sensors / Nurhana Ilmira Harun …[et al.]. (2014) In: Prosiding KONAKA Konferensi Akademik 2014, 28 Oktober 2014, UiTM PAHANG.

Hashim, Mohd Ridhwan (2020) Synthesis of natural superabsorbent organic hybrid aerogel from sodium alginate-soy protein isolate. (2020) [Student Project] (Unpublished)

Hashim, Mohd Ridhwan and Mustapaa, Ana Najwa and Hanipah, Suhaiza Hanim (2020) Synthesis of hydrophobic superabsorbent using sodium alginate and soy protein isolate: article. (2020) pp. 1-5.

Hashim, Ummu Raihanah (2015) Compressive properties of fibre reinforced polymer (FRP) rod filled with aluminium foam / Ummu Raihanah Hashim. (2015) Masters thesis, thesis, Universiti Teknologi MARA.

Hashim @ Do Pok Seng, Nur Hayati (2004) Types and properties of wood adhesives / Nur Hayati Hashim @ Ho Pok Seng. (2004) [Student Project] (Unpublished)

Husin, Nur Zakiah Hanan (2019) Conductivity and properties of graphene filler in poly (lactic acid) for electrostatic dissipative (ESD) film. (2019) [Student Project] (Unpublished)

Husin, Nur Zakiah Hanan and Mohamed, Rahmah and Sharudin, Rahida Wati (2019) Conductivity and properties of graphene filler in poly (lactic acid) for electrostatic dissipative (ESD) film: article. (2019) pp. 1-4.

I

Ibrahim, Norlita (2005) On a study of polymeric-foam padding as a potential vibration absorbtion for uses in household appliance / Norlita Ibrahim. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Idris, Nur Fadhilah and Mustafa, Asrul (2017) Comparative odour analysis of natural rubber latex-based paints using olfactometer / Nur Fadhilah Idris and Asrul Mustafa. (2017) ESTEEM Academic Journal, 13 (SI). 57 -64. ISSN 2289-4934

Idris, Nurul Umirah (2017) Effect of Polyvinylpyrrolidone on biodegradable film derived from chitosan- Poly (Vinyl Alcohol) for plastic packaging application. (2017) [Student Project] (Unpublished)

Idris, Nurul Umirah and Subuki, Istikamah (2017) Effect of Polyvinylpyrrolidone on biodegradable film derived from chitosan- Poly (Vinyl Alcohol) for plastic packaging application: article. (2017) pp. 1-8.

Irham, Nurul Fatin Amalina (2017) Determine the lower and upper bounds of prevention barriers failure probabilities to predict the accident causation probability. (2017) [Student Project] (Unpublished)

Ishak, Sarah (2009) Stability of total phenolic content in vitis vinifera L. At different temperature and storage time / Sarah Ishak. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ismail, Dzuraiezhar (2008) The crystal growth in homopolymer polyvinylidene flouride (PVDF) and copolymer polyvinylidene flouride-triflouroethylene (PVDF-TrFE) / Dzuraiezhar Ismail. (2008) Degree thesis, thesis, Universiti Teknologi MARA.

J

Jaafar, Mohammad Izzat and Raghali, Nur Firza Syazni and Syed Ismail, Sharifah Nafisah and Rajmi, Rozilah and Muhd Zailani, Nabilah Akemal and Zainal Abidin, Siti Zafirah and Nazir, Khuzaimah (2023) Effect of graphene oxide on poly (methyl methacrylate)-grafted natural rubber polymer electrolytes / Mohammad Izzat Jaafar ... [et al.]. (2023) Scientific Research Journal, 20 (SI Oct): 4. pp. 45-54. ISSN 1675-7009

Jamaldin, Mohd Nazree (2018) Fabrication and mechanical properties of musa spp. blend with polvpropylene (c3h6)n as polymer composite / Mohd Nazree Jamaldin. (2018) [Student Project] (Unpublished)

Jasmi, Nor Farhana and Kasim, Jamaludin and Che Hussin, Muslyza (2015) Effects of coupling agent on mechanical properties and water absorption of oil palm frond-polypropylene composite / Nor Farhana Jasmi, Jamaludin Kasim and Muslyza Che Hussin. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

K

Kwei Koh, Jin and Wei Lai, Chin and Johan, Mohd Rafie and Seng Gan, Sin and Chua, Wei Wei (2022) Synergistic effect of polyacrylamide (PAM) and silica on the rheological performance of water-based drilling fluid at specific temperature / Jin Kwei Koh ... [et al.]. (2022) In: UNSPECIFIED.

M

Majid, Nur Izati (2017) Effect of loading and H₂O wetness of hydrogel biochar derived from EFB for H₂S gas sorption. (2017) [Student Project] (Unpublished)

Majid, Nur Izati and Alias, Azil Bahari and Meri, Nur Hidayah (2017) Effect of loading and H₂O wetness of hydrogel biochar derived from EFB for H₂S gas sorption: article. (2017) pp. 1-6.

Marudin, Farahanis (2017) The dielectric constant (ɛ') and loss tangent (δ) of magnetite (fe3o4) filled thermoplastic natural rubber composite / Farahanis Marudin. (2017) [Student Project] (Unpublished)

Mat Isa, Naimah (2024) PMMA polymer microfiber doped with polyaniline and multi-walled carbon nanotubes for sensing application. (2024) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Mat Lazim, Mohd Noorwadi (2008) Polymer blends (polypropylene) filled rice husk ash / Mohd Noorwadi Mat Lazim. (2008) [Student Project] (Unpublished)

Mat Nor, Mohd Hazarul Hasnain (2008) Effect of filler on ethylene carbonate-plasticized hexanoyl chitosan-based polymer electrolytes / Mohd Hazarul Hasnain Mat Nor. (2008) [Student Project] (Unpublished)

Md Isa, Muhammad Ikmal (2018) Blending of SiO2 with LLDPE via extrusion 2 / Muhammad Ikmal Md Isa. (2018) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Md Shah, Noraishah (2010) Study on mechanical properties and rheological behaviour of polypropylene reinforced palm oil empty fruit bunch / Noraishah Md Shah. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohamad, Nazatul Nabila and Razali, Zainab and Sarip, Muhammad Naiman and Kamaruddin, Sharir Aizat and Abdullah, Shafinas and A Hamid, Huzaifah and Ahmad Nasir, Nor Atikah Husna (2021) Comparison on biodegradation of low-density polyethylene (LDPE) mixed with corn starch by A. Niger, R. Oryzae and their biofilm / Nazatul Nabila Mohamad … [et al.]. (2021) Gading Journal of Science and Technology, 4 (2). pp. 10-19. ISSN 2637 – 0018

Mohamad, Nur Hanisah (2017) Gelatin (binder) characterization of jackfruit seed starch for biodegradable plastic fabrication / Nur Hanisah Mohamad. (2017) [Student Project] (Unpublished)

Mohamed, Nur Farahlina (2009) Mechanical properties of coconut husk filled polypropylene / Nur Farahlina Mohamed. (2009) [Student Project] (Unpublished)

Mohamed, Rabiatul Manisah (2008) Expandable polystyrene (EPS) foam filled epoxy composite / Rabiatul Manisah Mohamed. (2008) Masters thesis, thesis, Universiti Teknologi MARA.

Mohamed Ariffin, Norkhairul (2008) Preparation and characterization of composited polymer electrolytes for aluminum-air battery / Norkhairul Mohamed Ariffin. (2008) [Student Project] (Unpublished)

Mohammad Shah, Mohammad Afif (2019) Performance study of mixed matrix membrane in various synthesized zeolite imidazole framework loading for gas separation. (2019) [Student Project] (Unpublished)

Mohammad Shah, Mohammad Afif (2019) Performance study of mixed matrix membrane in various synthesized zeolite imidazole framework loading for gas separation: article. (2019) pp. 1-5.

Mohd Adnan, Umar Iqqbal Al-Biruni and Rashiddy Wong, Freddawati and Morni, Mohamad Firhan and Abdullah, Abdul Hakim and Abd Rashid, Amirul and Soon, Kong Yong (2023) Mechanical properties of rice husk-recycled polypropylene composite / Umar Iqqbal Al-Biruni Mohd Adnan ... [et al.]. (2023) Journal of Mechanical Engineering (JMechE), 12 (1): 3. pp. 45-61. ISSN 1823-5514 ; 2550-164X

Mohd Ali, Nada Syahifah (2008) Fabrication and characterisation of filled Polyvinyl Alcohol (PVA): Sago Starch Acetate and Microcrystalline Cellulose (MCC) / Nada Syahifah Mohd Ali. (2008) [Student Project] (Unpublished)

Mohd Alzubairi, Siti Nur Adilah (2022) Optimizing of light-trapping schemes in silicon solar cells using ray tracing simulation / Siti Nur Adilah Mohd Alzubairi. (2022) [Student Project] (Submitted)

Mohd Ayob, Nurul Atiqah (2018) Analysis of fluted natural fibre reinforced high density polyethylene roofing panel / Nurul Atiqah Mohd Ayob. (2018) In: THE DOCTORAL RESEARCH ABSTRACTS. IGS Biannual Publication, 14 . Institute of Graduate Studies, UiTM, Shah Alam.

Mohd Izhar, Muhammad Haziq (2017) Effect of processing parameters on nanofibers via water vortex and conventional electrospinning. (2017) [Student Project] (Unpublished)

Mohd Izhar, Muhammad Haziq and Kadri, Atikah (2017) Effect of processing parameters on nanofibers via water vortex electrospinning: article. (2017) pp. 1-4.

Mohd Johan, Mohd Sabri (2008) Preparation and characterization of polymer composites by using silica as filler / Mohd Sabri Mohd Johan. (2008) [Student Project] (Unpublished)

Mohd Makhtar, Nurul Shuhada (2015) Processing and characterization of biobased polymer derived from Tacca leontopetaloides starch with rice husk silica and natural rubber blends / Nurul Shuhada Mohd Makhtar. (2015) Masters thesis, thesis, Universiti Teknologi MARA.

Mohd Masri, Aina Syakirah and Kamarozaman, Nur Syahirah and Zainal, Nurbaya and Zulkifli, Zurita and Herman, Sukreen Hana (2025) The comparison of pH sensing performance based on different polymer materials of TiO₂- based electrode. (2025) Journal of Electrical and Electronic Systems Research (JEESR), 27 (1): 20. pp. 165-171. ISSN 1985-5389

Mohd Nasir, Rosnasuha (2016) The effect of alumina as filler in waste cooking oil-based polyurethane solid polymer electrolyte / Rosnasuha Mohd Nasir. (2016) [Student Project] (Unpublished)

Mohd Noor, Wan Noor Aliyah (2020) The effect of electron beam on the mechanical properties of jackfruit seed strach/polyvinyl alcohol blend based on the polymers composite / Wan Noor Aliyah Mohd Noor. (2020) [Student Project] (Unpublished)

Mohd Pilus, Nur Suhaila (2023) Effects of high temperature on formaldehyde and antimony levels in polyethylene terephthalate (PET) bottled mineral water. (2023) [Student Project] (Unpublished)

Mohd Rashid, Amirah Asyiqin and Ideris, Norhidayah (2017) Thermodynamics studies of protein adsorption on PVDF membrane: article. (2017) pp. 1-5.

Mohd Salleh, Mohd Hazimin and M.Salleh, Mohd Haziq and Abd Hadi, Muhammad Salihi (2018) Double microring resonators polymer wave guide for optical biosensing / Mohd Hazimin Mohd Salleh, Mohd Haziq M.Salleh and Muhammad Salihi Abd Hadi. (2018) Gading Journal for Science and Technology, 1 (1). pp. 61-70. ISSN 2637-0018

Mohd Shah, Aziurah and Zaharudin, Aznifa Mahyam and Budin, Salina (2009) Effect of surface treatment on morphology and mechanical properties of polypropylene reinforced kaolin / Aziurah Mohd Shah, Aznifa Mahyam Zaharudin and Salina Budin. (2009) [Research Reports] (Unpublished)

Mohd Taib, Norrulhuda and Achim, Norfarisha and Hassan, Zulkafli (2016) Polyhydroxybutyrate for improved oil recovery: a literature review / Norrulhuda Mohd Taib, Norfarisha Achim and Zulkafli Hassan. (2016) Scientific Research Journal, 13 (1). pp. 40-52. ISSN 1675-7009

Mohd Zaine, Muhammad Amirul Adeeb (2017) A study of thermal properties and water absorption of thermoplastic starch film reinforce with rice husk biochar / Muhammad Amirul Adeeb Mohd Zaine. (2017) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Zaine, Muhammad Amirul Adeeb and Sauid, Suhaila (2017) Thermal properties and water absorption study of thermoplastic starch film reinforced with rice husk biochar: article / Muhammad Amirul Adeeb Mohd Zaine, Suhaila Sauid. (2017) pp. 1-3.

Mohd Zakaria, Nur Nadia (2018) Study of therapeutic bioactives from Pandanus Amaryllifolius sp for functional food application / Nur Nadia Mohd Zakaria. (2018) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Muhamad Kamil, Muhammad Khairi and Kamalul Aripin, Nurul Fadhilah (2017) Preparation of drug carrier from glycosides and polymer: determine the encapsulation efficiency: article. (2017) pp. 1-4.

Muhammad Rasidi, Nur Ummi Anisa (2024) Surface functionalization of polymer membrane in enhancing biocatalytic removal of water micropollutants / Nur Ummi Anisa Muhammad Rasidi. (2024) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Muhammad Shazwan, Harris Shazlan (2019) Rheological studies of Acrylonitrile Butadiene Styrene (ABS) reinforced carbon black blends. (2019) [Student Project] (Unpublished)

Muhammad Shazwan, Harris Shazlan and Mohd Alauddin, Sakinah (2019) Rheological studies of ABS reinforced carbon black blends: article. (2019) pp. 1-3.

Mustafa Kamal, Amira Syazwani (2021) Effect of fermentation condition and alkali treatment on acetobacter xylinum bacterial cellulose membranes properties / Amira Syazwani Mustafa Kamal. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

Mustapa, Roslinda (2017) Synthesis and characterization of polyaniline / sodium sulfosuccinate in ammonia detection / Roslinda Mustapa. (2017) [Student Project] (Unpublished)

Mustaza, Nur Munirah and Mohd Salleh, Farrahshaida and Rahmat, Syahmin Ilyana and Marzuki, Afeeqa Puteri and Izdihar Tharazi, Izdihar Tharazi and Ismaill, Muhammad Hussain and Murat, Bibi Intan Suraya (2024) Influence of hydroxyapatite particle size on the flowability of PLA/HA filament / Nur Munirah Mustaza ... [et al.]. (2024) Journal of Mechanical Engineering (JMechE), 21 (2): 10. pp. 159-179. ISSN 1823-5514 ; 2550-164X

N

Nasir, Noor Ayunie (2010) Ionic conduction in composite MG30 polymer electrolytes / Noor Ayunie Nasir. (2010) [Student Project] (Unpublished)

Nik Mohamed Kamal, Nik Shamimi Nazma and Othman, Nurhidayati (2017) Effects of fabrication conditions on the microstucture and performance PES membrane: article. (2017) pp. 1-5.

Nor Daumi, Muhammad Nur Afiq (2018) Effect of chemical foaming agents on mechanical properties of PP/wood fiber composites / Muhammad Nur Afiq Nor Daumi. (2018) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Nordin, Anuar (1998) Potensi penggunaan paip induk Unplasticised Polyvinyl Chloride (uPVC ) dalam menaikkan taraf sistem pengagihan air. Kes kajian: Zon B, Kota Tinggi, Johor / Anuar Nordin. (1998) Degree thesis, thesis, Institut Teknologi MARA (ITM).

Nordin, Sofea Hanom (2020) Modelling of average pore diameter and porosity of porous PCL/HA composite by using ANOVA analysis. (2020) [Student Project] (Unpublished)

Nordin, Sofea Hanom and Akhbar, Suffiyana (2020) Modelling of average pore diameter and porosity of porous PCL/HA composite to the foaming conditions by using ANOVA analysis: article. (2020) pp. 1-7.

Norizan, Norhazwan (2005) Notched strength of fiber-reinforced polymer (FRP) / Norhazwan Norizan. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

P

Paulus, Mohamad Nazrie (2019) Blending of LLDPE with SiO₂ via extrusion. (2019) [Student Project] (Unpublished)

Paulus, Mohamad Nazrie and Hanipah, Suhaiza Hanim (2019) Blending of LLDPE with SiO₂ via extrusion: article. (2019) pp. 1-4.

Paulus, Mohamad Nazrie and Hanipah, Suhaiza Hanim (2019) Blending of LLDPE with SiO₂ via extrusion: article. (2019) pp. 1-4.

R

Raja Sahrul Hishan, Raja Iman Nadiah (2019) Utilization of LDPE plastic bag wastes into building blocks / Raja Iman Nadiah Raja Sahrul Hishan. (2019) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Raja Sahrul Hishan, Raja Iman Nadiah and Hamzah, Fazlena (2019) Utilization of LDPE plastic bag wastes into building blocks: article / Raja Iman Nadiah Raja Sahrul Hishan, Dr. Fazlena Hamzah. (2019) pp. 1-6.

Rajab, Nur Anis (2019) Synthesis of polyurethane resin from oil palm frond / Nur Anis Rajab. (2019) [Student Project] (Unpublished)

Ramli, Nor Amlizan and Gary, P. Martin (2004) A study on dissolution rates of silver sulphadiazine microcapsules using different polymers / Nor Amlizan Ramli and Gary P. Martin. (2004) In: STSS 2004 : SAINS TEKNOLOGI JILID 1, 31 MEI – 1 JUN 2004, HOTEL VISTANA, KUANTAN, PAHANG.

Ramli, Raihan (2020) The effect of zinc oxide to the structural properties of polyvinyl alcohol and jackfruit seed blend / Raihan Ramli. (2020) [Student Project] (Unpublished)

Ramli, Roslim (2015) Characterizing physical properties and morphological structures of peroxide-vulcanized and sulphur-vulcanized natural rubber latex films / Roslim Ramli. (2015) Masters thesis, thesis, Universiti Teknologi MARA.

Rashid, Ahmad Ramli and Zolmahadi, Nurul Shafika and Md Zaidi, Nurhanis Farisha and Jihat, Danish Akmal Impact and thermal properties of tin slag polyester composite / Ahmad Ramli Rashidi ... [et al.]. [Student Project]

Roshaizi, Nurul Aliad (2019) Mechanical and thermal properties of composite board prepared by using high density polyethylene (HDPE) and saw dust with addition of Maleic Anyhride (MA) as coupling agent. (2019) [Student Project] (Unpublished)

Roshaizi, Nurul Aliad and Mulana, Farid (2019) Mechanical properties of composite board prepared by using high density polyethylene (HDPE) and saw dust with addition of Maleic Anyhride (MA) as coupling agent: article. (2019) pp. 1-5.

S

Saiful, Nur Asmaa (2019) The effect of Red Palm Oil concentration towards characteristics and biodegradability of PLA-Zinc film. (2019) [Student Project] (Unpublished)

Saiful, Nur Asmaa and Abd Karim, Siti Fatma (2019) The effect of red palm oil concentration towards characteristics and biodegradability of PLA-zinc film: article. (2019) pp. 1-4.

Sarji, Mohd Yusof and Tg. Hanafi, Tg. Mohd Zainudin (1990) Fatigue of engineering plastics part 1 polymethylmethacrylate (PMMA) / Mohd Yusof Sarji and Tg. Mohd Zainudin Tg. Hanafi. (1990) [Student Project] (Unpublished)

Shahrir, Noramiera (2017) Antimicrobial activity euphorbia hirta plant extracts against escherichia coli and candida albicans / Noramiera Shahrir. (2017) [Student Project] (Unpublished)

Shuib, Solehuddin and Abd Manap, Muhammad Faris and Abdullah, Abdul Halim and Dimon, Mohd Zamrin and Romli, Ahmad Zafir and Ahmed Shokri, Amran (2018) Epoxy-UHMWPE acetabular cup performance based on finite element study / Solehuddin Shuib ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 117-140. ISSN 18235514

Shukri, Siti Maisarah and Pardi, Faezah and Sidik, Norrizah Jaafar (2021) In Vitro anti-collagenase activity and total phenolic content of five selected herbs: a review / Siti Maisarah Shukri, Faezah Pardi and Norrizah Jaafar Sidik. (2021) Science Letters (ScL), 15 (1). pp. 117-127. ISSN 2682-8626

Sidek, Norbaya (2018) Chemical modified sand soil using polyurethane (PU) for foundation improvement / Norbaya Hj. Sidek. (2018) In: The Doctoral Research Abstracts. IPSis Biannual Publication, 14 (14). Institute of Graduate Studies, UiTM, Shah Alam.

Surip, Siti Norasmah and Bonnia, Noor Najmi and Azmi, Nur Naziha and Wan Jaafar, Wan Nor Raihan (2012) Innovative green material from nano-cellulose bio-plastic composite / Dr. Siti Norasmah Surip … [et al.]. (2012) In: RIID 2012: Innovation for Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka, p. 70. (Unpublished)

Syed Draman, Sarifah Fauziah and Daik, Rusli and Abdullah, Mohd Lazim (2011) A preliminary study on understanding and attitude towards chemical labeling using Globally Harmonised System (GHS) for secondary level students in Terengganu / Sarifah Fauziah Syed Draman, Rusli Daik and Mohd Lazim Abdullah. (2011) [Research Reports] (Unpublished)

Syed Draman, Sarifah Fauziah and Daik, Rusli and Ahmad, Musa (2008) Studies on potential of sulphonic acid-doped polyaniline as oxygen sensor / Sarifah Fauziah Syed Draman, Rusli Daik and Musa Ahmad. (2008) In: Proceedings STSS 2008 Broadening Horizons Through Research Science and Technology, 3-4 June 2008, M.S. Garden Hotel, Kuantan Pahang.

Sylvester Silin, Joyce (2018) Physical, mechanical and antimicrobial properties of edible sago starch-oil composite film containing garlic oil as antimicrobial agent for food packaging. (2018) [Student Project] (Unpublished)

Sylvester Silin, Joyce and Hamidon, Fariza (2018) Physical and mechanical properties of composite sago starch-oil edible film: article. (2018) pp. 1-6.

T

Taharim, R. M. and Jai, Junaidah and Yaakub, Najmiddin (2012) Mechanical performance of epoxidized palm olein-epoxy coatings on metal surface / R. M. Taharim, Junaidah Jai and Najmiddin Yaakub. (2012)

W

Wahab, Nor Hafiza Izzati (2017) A study on the effect of anthocyanin pigment from purple cabbage for food packaging. (2017) [Student Project] (Unpublished)

Wan Adnan, Wan Elyn Amira (2009) Antioxidant and antimicrobial properties of two local edible mushrooms / Wan Elyn Amira Wan Adnan. (2009) [Student Project] (Unpublished)

Wan Mahmud Sabri, Wan Izyan (2010) Antimicrobial study of essential oil from Pogostemon cablin / Wan Izyan Wan Mahmud Sabri. (2010) [Student Project] (Unpublished)

Wan Mohamed, Wan Ahmad Najmi and Atan, Rahim (2010) Computational analysis on thermal performance and coolant flow of an air-cooled polymer electrolyte membrane fuel cell / Wan Ahmad Najmi Wan Mohamed and Rahim Atan. (2010) Journal of Mechanical Engineering (JMechE), 7 (2). pp. 15-36. ISSN 1823-5514 ; 2550-164X

Wan Rosli, Wan Muhammad Nadzmi and Alauddin, Sakinah (2019) The study of electrical conductivity of ABS reinforced carbon black blends: article. (2019) pp. 1-6.

Y

Yaacob, Che Norainon (2010) Determination of total phenolic content and antioxidant activity in sea cucumber body wall / Che Norainon Yaacob. (2010) [Student Project] (Unpublished)

Yasin, Ummu Qani'ah (2018) The blooming of compounding ingredients onto natural rubber vulcanized surface / Ummu Qani'ah Yasin. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Yusof, F. M. and Jumahat, A. and Zahib, Z. M. and Rahman, N. L. A. and Maslan, A. A. and Chalid, M. (2025) Wear properties of coated and uncoated glass and basalt fibre reinforced polyester composites. (2025) Journal of Mechanical Engineering (JMechE), 14 (SI): 10. pp. 162-171. ISSN e-ISSN: 2550-164X

Z

Zahari, Ahmad Luqman (2017) Synthesis and characterization of β-cyclodextrin/alginate aerogel via chemical cross linking through supercritical drying of carbon dioxide. (2017) [Student Project] (Unpublished)

Zainal Abidin, Anis Sakinah and Ratnam, Chantara Thevy and Abdullah, Luqman Chuah (2008) Characterization of irradiation-induced crosslink ethylene vinyl acetate/waste tire dust (EVA/WTD) blend / Anis Sakinah Zainal Abidin, Chantara Thevy Ratnam and Luqman Chuah Abdullah. (2008) In: Proceedings STSS 2008 Broadening Horizons Through Research Science and Technology, 3 – 4 June 2008, M.S Garden Hotel Kuantan, Pahang.

Zakaria, Mohamad Zaidi (2016) Comparison of methods on detection of Bisphenol A (BPA) / Mohamad Zaidi Zakaria. (2016) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Zul`Aziki, Siti Nur`Amira (2016) Effect of thermal on BPA leaches from baby bottles. (2016) [Student Project] (Unpublished)

Zulkefli, Norlydia Azreen (2017) Ceramic membrane preparation from waste : effect of binders. (2017) [Student Project] (Unpublished)

Zulkefli, Norlydia Azreen and Ibrahim, Norliza (2017) Ceramic membrane preparation from waste : effect of binders: article. (2017) pp. 1-5.

Zuri, Nurul Fatihah (2019) Mechanical and thermal properties of composite board prepared by using polypropylene and cardboard with addition of Maleic Anhydride (MA) as coupling agent. (2019) [Student Project] (Unpublished)

Zuri, Nurul Fatihah and Mulana, Farid (2019) Mechanical and thermal properties of composite board prepared by using polypropylene and cardboard with addition of Maleic Anhydride (MA) as coupling agent: article. (2019) pp. 1-6.