Items where Subject is "Metals"

Article

Springback analysis of thin tubes under torsional loading / Vikas Kumar Choubey, Mayank Gangwar and J. P. Dwivedi. (2010) Journal of Mechanical Engineering (JMechE), 7 (2). pp. 81-102. ISSN 1823-5514 ; 2550-164X

Torsional springback analysis in thin tubes with non-linear work hardening / Vikas Kumar Choubey, Mayank Gangwar and J. P. Dwivedi. (2010) Journal of Mechanical Engineering (JMechE), 7 (1). pp. 15-34. ISSN 1823-5514 ; 2550-164X

Springback analysis of thin tubes with arbitrary stress-strain curves / Mayank Gangwar … [et al.]. (2011) Journal of Mechanical Engineering (JMechE), 8 (1). pp. 57-76. ISSN 1823-5514 ; 2550-164X

Effect of sintering temperatures on microstructural changes and phase transformation of nearly equiatomic microporous NiTi Alloy produced by metal injection moulding / Mashitah Maso’od ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 115-126. ISSN 18235514

The influence of repeated heat treatments on the propagation of fatigue cracking of medium carburized steel / Majid Khaleel Najem … [et al.]. (2023) Journal of Mechanical Engineering (JMechE), 20 (3): 20. pp. 387-408. ISSN 1823-5514 ; 2550-164X

Thesis

Short pulse laser generation in 1.5-micron region using transition metal-based saturable absorber / Norizan Ahmed. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Development of a shape memory alloy actuation system for a laboratory finger prosthesis / Terence Baru Meechang. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

The reconciled finite element model of riveted joints structure for crash analysis / Nor Munirah Hassin. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Study on difference types of powder protective coating effect on mild steel / Marzaimee Ismail. (2003) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Removal of copper metal through a hybrid bio-chemical precipitation process / Nurul Fariha Lokman. (2011) Masters thesis, thesis, Universiti Teknologi MARA.

The aqueous environmental effects on Co-Ni-Fe coated stainless steel bolts / Muhammad Syafiq Md.Nor. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Productivity improvements in metal furniture industry / Norazira Mohd Sayuti. (2010) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Characterization of aluminium – copper (Al – Cu) alloy metal matrix composites reinforced by in situ zirconium diboride (ZrB2) / Nurul Hidayah Mustafa. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

Studies on the adsorption and corrosion inhibition of substituted benzylidene schiff bases on mild steel in 1 M HCI / Nor Zakiah Nor Hashim. (2015) PhD thesis, thesis, Universiti Teknologi MARA.

Corrosion protection / Nor Hayati Yahya. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Statistical quality control in metal based furniture industry / Nor Faeza Za'abah. (2010) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

S-phase layer by hybrid low temperature thermochemical treatment process on 316 LVM stainless steel: corrosion and biocompatibility test / Siti Umrah Zainal. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Student Project

Fabrication of miniature sunflower seeds peeler / Nur Farra Farhana Abdullah. (2022) [Student Project] (Submitted)

Study of hardness properties of butt welded joints using Metal Inert Gas (MIG) welding on mild steel plate / Muhammad Syahir Azman. (2022) [Student Project] (Unpublished)

The effect of machining parameters on surface integrity of mild steel material using lathe machine / Faiz Azzhar Hamzah. (2022) [Student Project] (Submitted)

Application of solar energy in cathodic protection of buried pipelines / Mat Nizi Mamat and Wan Musa Wan Mahmud. (2001) [Student Project] (Unpublished)

Study of hardenability of mild steel and medium carbon steel by Jominy test / Muhammad Aiman Hafizin Mazlan. (2022) [Student Project] (Submitted)

Effect of microstructure on low carbon steel due to variable temperature using plasma cutting / Ahmad Shakell Naim Md Sanusi. (2022) [Student Project] (Unpublished)

Mechanical and physical properties of aluminium vs steel / Amni Wafiqah Mohd Arhafudin. (2021) [Student Project] (Submitted)

Study of hardness properties of buttwelded joints using Shield Metal Arc Welding (SMAW) on mild steel plate / Nur Ain Syuhada Syafika Mohd Syukri. (2022) [Student Project] (Unpublished)

Design and fabrication of lemang rotating machine / Muhammad Anas Nasrin Mohd Yusri. (2022) [Student Project] (Unpublished)

Design and fabrication of adjustable spanner / Muhammad Amyrul Azri Mohd Zain. (2022) [Student Project] (Unpublished)

Study of hardness properties of buttwelded joints using Shield Metal Arcwelding (SMAW) on stainless steel plate / Nik Mohamad Aqeel Nik Mohamad Kariman. (2022) [Student Project] (Submitted)

Study of hardness propeties of butt welded joints using Metal Inert Gas (MIG) welding on stainless steel plate / Muhammad Izzat Hakimi Rosli. (2022) [Student Project] (Unpublished)

Design and fabrication of gout patient movable device / Wan Ahmad Syamil Asyraf Wan Azman. (2022) [Student Project] (Submitted)

Sacrificial anode cathodic protection of buried pipes / Wan Samsudin Wan Khalid. (2001) [Student Project] (Unpublished)

The influence of geometry specimens on mild steel in slow cooling process / Muhammad Amar Zulhaikal Zamre. (2022) [Student Project] (Submitted)

The effects of normalizing and annealing on the microstructure of stainless steel / Amirah Zul Imanina Zulkifli. (2022) [Student Project] (Unpublished)