Items where Division is "Faculty of Applied Sciences" and Year is 2013
Student Project
Properties of cement boards from different percentage of sodium silicate (na2si03) and oil palm trunk (opt) layers / Azhari Abd Kadir.
(2013)
[Student Project]
(Unpublished)
Properties of finger joint from acacia mangium wood / Aizuddin Arif Abdul Ghani.
(2013)
[Student Project]
(Unpublished)
Mechanical and physical properties of particleboard from two different fast growing species / Ahmad Razmi Abdul Manan.
(2013)
[Student Project]
(Unpublished)
The properties of three layer particleboard from oil palm fronds
(elaeis guineensis) / Hammad Asyraf Abdul Rahman.
(2013)
[Student Project]
(Unpublished)
Strength properties of sandwich panel made from medium density fiberboard and corrugated paperboard / Ahmad Basirun Abdul Rashid.
(2013)
[Student Project]
(Unpublished)
The factors that influence teak furniture sales at Temerloh town / Muhammad Hairul Abdul Razak.
(2013)
[Student Project]
(Unpublished)
Weathered oil palm trunk as alternative raw material for ceiling board (Elaeis guineensis) / Normala Abu Bakar.
(2013)
[Student Project]
(Unpublished)
Students' sitting posture and patterns in Universiti Teknologi MARA Pahang / Muhamad Iqbal Ahmad Bostaman.
(2013)
[Student Project]
(Unpublished)
Properties of acacia mangium wood cement board in relation to particle size and curing time / Nur Aza Farahin Amirruddin.
(2013)
[Student Project]
(Unpublished)
Properties of particleboard from wild acacia mangium: effect of particle size and board thicknesss / Siti Hazimah Awal Ud-Din.
(2013)
[Student Project]
(Unpublished)
Finishing properties of oil based paint on wood surfaces from two hardwood species / Syaiedeen Awang Rani.
(2013)
[Student Project]
(Unpublished)
Adjustable laptop table with diy concept / Zamri Buhari.
(2013)
[Student Project]
(Unpublished)
Multipurpose table using knockdown concept / Che Zulkhairi Iswandi Che Hamid.
(2013)
[Student Project]
(Unpublished)
Relationship of board density and resin contents towards the particleboard properties from weathered oil palm trunk / Muhamad Nasrulrahman Che Kar.
(2013)
[Student Project]
(Unpublished)
Effect of portion and oven dry exposure towards surface roughness and bending strength of dendrocalamus asper / Mohd Hafiz Chek Romli.
(2013)
[Student Project]
(Unpublished)
Mechanical and physical properties of particleboard made from acacia mangium species / Nurul Halimah Ghazali.
(2013)
[Student Project]
(Unpublished)
Adsorption of methylene blue onto xanthogenated-modified chitosan microbeads / Siti Nadzifah Ghazali.
(2013)
[Student Project]
(Unpublished)
Properties of particleboard from Buluh Minyak (Bambusa vulgaris) / Halimatulsaadiah Halim.
(2013)
[Student Project]
(Unpublished)
Ergonomic chair design for musculoskeletal disorder (MSD) / Fazlinarulzaiha Haroon.
(2013)
[Student Project]
(Unpublished)
Finishing properties of polyurethane lacquer on acacia wood / Asminudin Hasanuddin.
(2013)
[Student Project]
(Unpublished)
Distribution and potential origin of heavy metals air pollution around Gebeng industrial area / Asiah Ismail.
(2013)
[Student Project]
(Unpublished)
Mechanical properties of finger joint from acacia manglum spp by adhesive types and tree
portion / Umar Khattab Jamal.
(2013)
[Student Project]
(Unpublished)
Fabrication and characterization of SRO modified bioactive glass nano particle by quick alkali mediated sol gel method / Nur Hidayati Jamil.
(2013)
[Student Project]
(Unpublished)
Finishing properties on particleboard from Gliricidia sepium / Nur Ain Jemain.
(2013)
[Student Project]
(Unpublished)
The effect of sealant as a finishing on a wood panel (plywood) / Shuhaili Johar.
(2013)
[Student Project]
(Unpublished)
Properties of particleboard made from acacia species: effects of resin content and hot press temperature / Nur Atiqah Nabilah Johari.
(2013)
[Student Project]
(Unpublished)
Consumption of furniture made from panel products among bumiputeras at Bandar Tun Abdul Razak Jengka / Muhammad Faiz Kamarudin.
(2013)
[Student Project]
(Unpublished)
Accumulation of heavy metals occurrence in industrial soils of Gebeng industrial area / Nur Izzati Mahamad Zamal Shari.
(2013)
[Student Project]
(Unpublished)
Properties of rice husk particleboard for exterior use / Nur Liyana Aifa Mahammad Asri.
(2013)
[Student Project]
(Unpublished)
Water resistance particleboard from weathered oil palm trunk / Fatihah Mamat.
(2013)
[Student Project]
(Unpublished)
Relationship between customer’s preference and satisfaction on the material of making furniture in Temerloh town / Nor Shahira Masdan.
(2013)
[Student Project]
(Unpublished)
Properties of oriented strand board made from banana pseudo stem (Musa acuminate colla (AA Group) cv. 'Lacatan') / Abdul Hadi Masod.
(2013)
[Student Project]
(Unpublished)
Effect of pentaerythritol abietate as tackifying agent in synthesis polyurethane from crude palm oil / Suhaila Rafeah Mat Jusoh.
(2013)
[Student Project]
(Unpublished)
Finishing properties of nitrocellulose (nc) on mersawa wood by steam treatment / Mazulizam Md Ali Hanapiah.
(2013)
[Student Project]
(Unpublished)
Physical and strength properties of dendrocalamus asper (Buluh Betong) at different portion and sub-portion / Mimi Suzaini Mohamed.
(2013)
[Student Project]
(Unpublished)
Properties of particleboard from oil palm frond for exterior use / Ainil Idzaty Mohamed Anwar.
(2013)
[Student Project]
(Unpublished)
Comparison of anthropometric data of 18-25 age (IPT Students) with 18-25 age (NON Students) / Mohamed Azmi Mohamed Ripin.
(2013)
[Student Project]
(Unpublished)
Multipurpose cabinet using knockdown concept / Md Azharulzaman Mohamed Said.
(2013)
[Student Project]
(Unpublished)
Determination of metals concentrations & water quality status along Ulu Jempul River / Siti Anis Mohd Amran.
(2013)
[Student Project]
(Unpublished)
Properties of finger jointing effect by adhersive
types on three different species / Mohd Khaidir Mohd Nor.
(2013)
[Student Project]
(Unpublished)
Dendrocalamus asper (Buluh Betong) as raw material to manufacture wood plastic composite (WPC) / Nur Farhana Mohd Zailani.
(2013)
[Student Project]
(Unpublished)
Solar photocatalytic degradation of methylene blue(dye) based on TiO2 / Norakmalah Mohd Zawawi.
(2013)
[Student Project]
(Unpublished)
Fully jointed rack without the use of fasteners / Muhammad Faizal Musa.
(2013)
[Student Project]
(Unpublished)
Strength properties of sandwich composite made from plywood as skins and corrugated paper board as core / Nur Atiqah Najib.
(2013)
[Student Project]
(Unpublished)
Potential of leucaena leucocephala wood as a source of renewable energy / Nur Saidah Nordin.
(2013)
[Student Project]
(Unpublished)
Properties of acacia mangium wood cement board in relation to particle size and wood cement ratio / Ahmad Badrul Hisyam Omar.
(2013)
[Student Project]
(Unpublished)
Bending strength properties of engineered slice lumber from OPT mixed with low density hardwood / Mohd Fadhli Othman.
(2013)
[Student Project]
(Unpublished)
Properties of particleboard from rubberwood and Raintree / Mohd Haniff Ramli.
(2013)
[Student Project]
(Unpublished)
Properties of particleboard from acacia species using different resin content and board density / Nur Amalina Razali.
(2013)
[Student Project]
(Unpublished)
Properties of particleboard from sentang and Kenaf core / Mohd Sufian Sarif.
(2013)
[Student Project]
(Unpublished)
Properties of particleboards made from rubberwood (hevea brasiliensis) and kenaf (hibiscus cannabinus l.) core / Syed Muhammad Azlan Sayed Idrus.
(2013)
[Student Project]
(Unpublished)
Determination of antioxidant activity in sugared and milked tea by using ferric reducing antioxidant power (frap) assay / Sharifah Nor Hafizai Syed Jaya.
(2013)
[Student Project]
(Unpublished)
Properties on ceiling board of rice husk (Oryza sativa) / Zurina Talib.
(2013)
[Student Project]
(Unpublished)
Finishing properties of plywood using
shellac / Wan Mohammad Farid Wan Abdul Manaf.
(2013)
[Student Project]
(Unpublished)
Properties of weathered oil palm trunk plastic composite in relationship to filler loading, particle size, filler loading and mapp addition/ Juwairiah Zafakali.
(2013)
[Student Project]
(Unpublished)
Properties of wood plastic composite from different oil palm trunk region / Mohd Azri Zainudin.
(2013)
[Student Project]
(Unpublished)
Properties of particleboard from admixture Kenaf (hibiscus cannabinus l.) core and oil palm trunk (OPT) / Mohd Shah Fitri Zolkapli.
(2013)
[Student Project]
(Unpublished)
Survey of musculoskeletal disorder (MSD) among people in Kota Setar / Asyraf Ikhmal Zulkifli.
(2013)
[Student Project]
(Unpublished)