Items where Division is "Faculty of Applied Sciences" and Year is 2005

[up]

Group by: Creators | Item Type | No Grouping

Jump to: Thesis | Student Project

Number of items: 51.

Thesis

The effect of layers and combinations on strength and physical properties of Laminated Veneer Lumber (LVL) from Oil Palm Trunk (OPT) / Norzatul Daut. (2005) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

Student Project

Properties of particleboard 450kg/m3 from Sesenduk (Endospermum Malaccensis) / Norjihan A. Bakar. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Variation in fiber morphology of Mahang Gajah (Macarangga gigantea) according to sapwood and heartwood and different height levels / Nor Hashilah Abd Halim. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of phenol-formaldehyde particleboard from Batai spp at density 450 kg/m3 / Norhasimah Abd Hanan. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of Oriented Strand Board (OSB) from mix Acacia Mangium (Acacia) and Endospermum diadenum (Sesenduk) at 7% resin content with density of 600kg/m3 / Nurul Huda Abd Rashid. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Comparision of extractive content between sapwood and heartwood for Mahang gajah (Macaranga gigantae) / Che Azahar Adzemin. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Band saw and circular saw: current utilization in wood working industry / Farhana Ahmad Azman. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Recreational park in Selangor / Norlaila Ahmad Fahmi. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of Resak- polypropylene (PP) Composite / Norfazila Ahmad Puzi. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Joinery for wood working / Nor Azni Awang. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Fiber morphology of juvenile rubber wood (Hevea brasiliensis) according to height portions and difference between sapwood and heartwood / Khairiyah Ayub. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Timber drying using compartment kiln / Siti Noor Adawieah Besar. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Solar drying / Kamal Che Deraman. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of oriented strand board from mix Sesenduk and Acacia at 5% pf resin content with density of 700 kg/m3 / Shazili Hamzah. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

The properties of Oriented Strand Board (OSB) mix Acacia mangium and Macaranga hypolueca with different grain direction / Farzila Harun. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboard (550 kg/m3) from Sesendok (Endospermum malaccensis) / Siti Hajar Hussin. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

The distribution study of Mahang kapur (Macaranga hypoleuca) in UiTM Jengka forest reserve (base line 1: line 1-line 5 and logging road) / Ismalyna Iskandar. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Physical and mechanical properties of polypropylene composite with Resak sawdust (60 mesh size) as filler / Aswadi Amirun Ismail. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of Oriented Strand Board (OSB) from mix Acacia and Sesenduk at 5% resin content with density of 600 kg/m3 / Zakiah Ismail. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Pulping of oil palm fronds by using soda aq: the effects of properties of paper according to 15, 20, 25% active alkali / Nazifah Jazulli. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of oriented strand board from mix of Acacia and Mahang with density of 600kg/m3 / Patricia Justinus. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Export of plywood by Malaysia to Asia for the year 2000 and 2001 / Aizat Hidayat Khairul Anwar. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

The distribution study of Ludai (Sapium SPP) in UiTM Jengka forest reserve (Base line 1: line 1 - line 5 and logging road) / Khadijah Khalid. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboard (650 KG/M3) from Sesendok (Endospermum malaccensis) / Safura Mad Juhari. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of thermoplastic composite from Oil Palm / Zuhana Mahmud, Abd Haqeem Abd Aziz and Siti Haziah Zaiton. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Variation of density and specific gravity of juvenile rubberwood (Hevea brasiliensis) with different height level / Ilyani Mansor. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of oriented strand board from Mahang species at 5% resin content with density of 500 kg/m3 / Noorzahakiman Azhan Mat Idris. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

The distribution study of Croton spp in UiTM Jengka forest reserve (base line 1: line 1 - line 5 and logging road) / Noor Hasyidawati Mat Noor. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Wood finishing: materials used / Lizawati Mohamad Nor. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Woodworking machineries: their anatomy and safety tips / Hazilla Mohammad. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Pulping of oil palm fronds using kraft : the effect of active alkaline on pulp and paper properties / Zuraida Mohd Noor. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of Oriented Strand Board (OSB) from mix Acacia and Mahang with density of 700 kg/m3 / Siti Noor Hidayah Mohd Sidi. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of Oriented Strand Board (OSB) from Acacia mangium with density of 800 kg/m3 / Siti Aishah Muhamad. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Preliminary study on board from oil palm trunk with density of 600kg/m3 at 7% resin content / Norazura Nakim. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of phenol formaldehyde particleboard from Batai (Paraserianthes falcataria) at a density of 550KG/M3 / Shahrena Ngademin. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Ash and lignin content of Juvenile rubberwood (Hevea brasilensis) / Nor Azura Nordin. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

The distribution study of Sesendok (Endospermum diadenum) in UiTM Jengka forest reserve (base line 1: line 1- line 5 and logging road) / Norizan Omar. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Anatomical structure of Kenaf (Hibiscus cannabinus) / Afendi Osman. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Ash and lignin content of Kenaf (Hibiscus cannabinus) / Rosnizam Ramli. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Bending properties of oriented strandboard from mix Acacia and Mahang at 5% resin content with different density / Nurul Ashima Rohimi. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Variation of extractives with height levels in rubberwood (Hevea brasiliensis) / Fadhil Roslan. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

The distribution study of Macaranga gigantea in UiTM Jengka Forest Reserve (base line 1: Line 1-Line 5 and logging road) / Shah Faizal Saharuddin. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Height and diameter growth of latex timber clone rubberwood / Suhaizul Salleh. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Bending properties of oriented strand board (OSB) from mix Acacia and Mahang at 7 % resin content with different density / Rusmaza Shafie. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Density and specific gravity of Kenaf (Hibiscus cannabinus) according stem and branch / Ali Siamit. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of homogenous and three-layer particleboard from Ketapang and oil palm particles / Siti Aidaliza Subardi, Noorfazurah Mohamad and Sri Normaysarah Abd Rani. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Pre liminary study on board from oil palm trunk, (elais guineenssiJacq), with density of 600 kg/ m3 at 5% phenol formaldehyde resin / Noordiana Sukur. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Fiber morfological properties of Kenaf (Hibiscus cannabinus) / Abdulrahman Sultang. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboard from juvenile Acacia mangium at 800 kg/m3 with 6 %,8 % and 10 % UF resin / Tuan Idayu Tuan Coob. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

The development of wood panel industry in Malaysia / Zariana Zahari. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Peripheral milling machines in wood industry / Zati Bayani Zulkifli. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

This list was generated on Sat Jun 7 04:57:13 2025 UTC.