Items where Division is "Faculty of Applied Sciences" and Year is 2005

A

A. Aziz, Muhamad Zamil (2005) Powder post beetles / Muhamad Zamil A. Aziz. [Student Project] (Unpublished)

A. Bakar, Norjihan (2005) Properties of particleboard 450kg/m3 from Sesenduk (Endospermum Malaccensis) / Norjihan A. Bakar. [Student Project] (Unpublished)

Abd Halim, Nor Hashilah (2005) Variation in fiber morphology of Mahang Gajah (Macarangga gigantea) according to sapwood and heartwood and different height levels / Nor Hashilah Abd Halim. [Student Project] (Unpublished)

Abd Hanan, Norhasimah (2005) Properties of phenol-formaldehyde particleboard from Batai spp at density 450 kg/m3 / Norhasimah Abd Hanan. [Student Project] (Unpublished)

Abd Rashid, Nurul Huda (2005) Properties of Oriented Strand Board (OSB) from mix Acacia Mangium (Acacia) and Endospermum diadenum (Sesenduk) at 7% resin content with density of 600kg/m3 / Nurul Huda Abd Rashid. [Student Project] (Unpublished)

Abd Razak, Mohd Shareizal (2005) Polypropylene plastic composite from resak / Mohd Shareizal Abd Razak. [Student Project] (Unpublished)

Adzemin, Che Azahar (2005) Comparision of extractive content between sapwood and heartwood for Mahang gajah (Macaranga gigantae) / Che Azahar Adzemin. [Student Project] (Unpublished)

Ahmad, Mohd Fauzi (2005) Properties of polypropylene composite using resak saw dust as fillers (unscreened and 40 mesh size) / Mohd Fauzi Ahmad. [Student Project] (Unpublished)

Ahmad Azman, Farhana (2005) Band saw and circular saw: current utilization in wood working industry / Farhana Ahmad Azman. [Student Project] (Unpublished)

Ahmad Fahmi, Norlaila (2005) Recreational park in Selangor / Norlaila Ahmad Fahmi. [Student Project] (Unpublished)

Ahmad Puzi, Norfazila (2005) Properties of Resak- polypropylene (PP) Composite / Norfazila Ahmad Puzi. [Student Project] (Unpublished)

Awang, Nor Azni (2005) Joinery for wood working / Nor Azni Awang. [Student Project] (Unpublished)

Ayub, Khairiyah (2005) Fiber morphology of juvenile rubber wood (Hevea brasiliensis) according to height portions and difference between sapwood and heartwood / Khairiyah Ayub. [Student Project] (Unpublished)

B

Baharom, Mohd Hisham (2005) Comparison of extractive content between stem and branch of kenaf (Hibiscus cannibinus) / Mohd Hisham Baharom. [Student Project] (Unpublished)

Besar, Siti Noor Adawieah (2005) Timber drying using compartment kiln / Siti Noor Adawieah Besar. [Student Project] (Unpublished)

C

Che Deraman, Kamal (2005) Solar drying / Kamal Che Deraman. [Student Project] (Unpublished)

D

Daut, Norzatul (2005) The effect of layers and combinations on strength and physical properties of Laminated Veneer Lumber (LVL) from Oil Palm Trunk (OPT) / Norzatul Daut. Degree Thesis , Universiti Teknologi MARA Pahang .

G

Ghazali, Mohd Khuzairi (2005) Timber drying / Mohd Khuzairi Ghazali. [Student Project] (Unpublished)

H

Hamzah, Shazili (2005) Properties of oriented strand board from mix Sesenduk and Acacia at 5% pf resin content with density of 700 kg/m3 / Shazili Hamzah. [Student Project] (Unpublished)

Harun, Farzila (2005) The properties of Oriented Strand Board (OSB) mix Acacia mangium and Macaranga hypolueca with different grain direction / Farzila Harun. [Student Project] (Unpublished)

Hassan, Muhammad Hakimi (2005) Practical procedures in kiln drying / Muhammad Hakimi Hassan. [Student Project] (Unpublished)

Hussin, Siti Hajar (2005) Properties of particleboard (550 kg/m3) from Sesendok (Endospermum malaccensis) / Siti Hajar Hussin. [Student Project] (Unpublished)

I

Iskandar, Ismalyna (2005) The distribution study of Mahang kapur (Macaranga hypoleuca) in UiTM Jengka forest reserve (base line 1: line 1-line 5 and logging road) / Ismalyna Iskandar. [Student Project] (Unpublished)

Ismail, Aswadi Amirun (2005) Physical and mechanical properties of polypropylene composite with Resak sawdust (60 mesh size) as filler / Aswadi Amirun Ismail. [Student Project] (Unpublished)

Ismail, Mohd Haris (2005) Determination of pore density in kenaf (Hibiscus cannabinus) / Mohd Haris Ismail. [Student Project] (Unpublished)

Ismail, Zakiah (2005) Properties of Oriented Strand Board (OSB) from mix Acacia and Sesenduk at 5% resin content with density of 600 kg/m3 / Zakiah Ismail. [Student Project] (Unpublished)

J

Jazulli, Nazifah (2005) Pulping of oil palm fronds by using soda aq: the effects of properties of paper according to 15, 20, 25% active alkali / Nazifah Jazulli. [Student Project] (Unpublished)

Justinus, Patricia (2005) Properties of oriented strand board from mix of Acacia and Mahang with density of 600kg/m3 / Patricia Justinus. [Student Project] (Unpublished)

K

Khairul Anwar, Aizat Hidayat (2005) Export of plywood by Malaysia to Asia for the year 2000 and 2001 / Aizat Hidayat Khairul Anwar. [Student Project] (Unpublished)

Khalid, Khadijah (2005) The distribution study of Ludai (Sapium SPP) in UiTM Jengka forest reserve (Base line 1: line 1 - line 5 and logging road) / Khadijah Khalid. [Student Project] (Unpublished)

M

Mad Juhari, Safura (2005) Properties of particleboard (650 KG/M3) from Sesendok (Endospermum malaccensis) / Safura Mad Juhari. [Student Project] (Unpublished)

Mahmud, Zuhana and Abd Aziz, Abd Haqeem and Zaiton, Siti Haziah (2005) Properties of thermoplastic composite from Oil Palm / Zuhana Mahmud, Abd Haqeem Abd Aziz and Siti Haziah Zaiton. [Student Project] (Unpublished)

Mansor, Ilyani (2005) Variation of density and specific gravity of juvenile rubberwood (Hevea brasiliensis) with different height level / Ilyani Mansor. [Student Project] (Unpublished)

Mat Idris, Noorzahakiman Azhan (2005) Properties of oriented strand board from Mahang species at 5% resin content with density of 500 kg/m3 / Noorzahakiman Azhan Mat Idris. [Student Project] (Unpublished)

Mat Noor, Noor Hasyidawati (2005) The distribution study of Croton spp in UiTM Jengka forest reserve (base line 1: line 1 - line 5 and logging road) / Noor Hasyidawati Mat Noor. [Student Project] (Unpublished)

Mohamad, Mohamad Sahadi (2005) Forest plantation development in Malaysia and the potential of rubberwood as an important source of timber in the future / Mohamad Sahadi Mohamad. [Student Project] (Unpublished)

Mohamad Kassim, Mohamad Haafiz (2005) Sap stain fungi / Mohamad Haafiz Mohamad Kassim. [Student Project] (Unpublished)

Mohamad Nor, Lizawati (2005) Wood finishing: materials used / Lizawati Mohamad Nor. [Student Project] (Unpublished)

Mohammad, Hazilla (2005) Woodworking machineries: their anatomy and safety tips / Hazilla Mohammad. [Student Project] (Unpublished)

Mohd Daud, Mohd Zulhilmee (2005) The study of oriented strand board (OSB) from acacia species with density of 600 kg/m3 / Mohd Zulhilmee Mohd Daud. [Student Project] (Unpublished)

Mohd Mahadar, Marliana (2005) Properties of oriented strand board (OSB) from Acacia mangium with density of 600 kg/m3 / Marliana Mohd Mahadar. [Student Project] (Unpublished)

Mohd Noor, Zuraida (2005) Pulping of oil palm fronds using kraft : the effect of active alkaline on pulp and paper properties / Zuraida Mohd Noor. [Student Project] (Unpublished)

Mohd Sidi, Siti Noor Hidayah (2005) Properties of Oriented Strand Board (OSB) from mix Acacia and Mahang with density of 700 kg/m3 / Siti Noor Hidayah Mohd Sidi. [Student Project] (Unpublished)

Mohd Termuji @ Ahmad, Mohamad Hasni (2005) Thermoplastic composite from resak sawdust (unscreen) using polypropylene as matrix / Mohamad Hasni Mohd Termuji @ Ahmad. [Student Project] (Unpublished)

Muhamad, Siti Aishah (2005) Properties of Oriented Strand Board (OSB) from Acacia mangium with density of 800 kg/m3 / Siti Aishah Muhamad. [Student Project] (Unpublished)

Mustafa, Mohd Abdul Fatah (2005) Water-borne preservatives: CCA / Mohd Abdul Fatah Mustafa. [Student Project] (Unpublished)

N

Nakim, Norazura (2005) Preliminary study on board from oil palm trunk with density of 600kg/m3 at 7% resin content / Norazura Nakim. [Student Project] (Unpublished)

Ngademin, Shahrena (2005) Properties of phenol formaldehyde particleboard from Batai (Paraserianthes falcataria) at a density of 550KG/M3 / Shahrena Ngademin. [Student Project] (Unpublished)

Nordin, Nor Azura (2005) Ash and lignin content of Juvenile rubberwood (Hevea brasilensis) / Nor Azura Nordin. [Student Project] (Unpublished)

O

Omar, Norizan (2005) The distribution study of Sesendok (Endospermum diadenum) in UiTM Jengka forest reserve (base line 1: line 1- line 5 and logging road) / Norizan Omar. [Student Project] (Unpublished)

Osman, Afendi (2005) Anatomical structure of Kenaf (Hibiscus cannabinus) / Afendi Osman. [Student Project] (Unpublished)

R

Ramli, Rosnizam (2005) Ash and lignin content of Kenaf (Hibiscus cannabinus) / Rosnizam Ramli. [Student Project] (Unpublished)

Razali, Mohd Khairul Effendy (2005) Mechanical and physical properties using resak sawdust as filler in the manufacturing of thermoplastic / Mohd Khairul Effendy Razali. [Student Project] (Unpublished)

Rohimi, Nurul Ashima (2005) Bending properties of oriented strandboard from mix Acacia and Mahang at 5% resin content with different density / Nurul Ashima Rohimi. [Student Project] (Unpublished)

Roslan, Fadhil (2005) Variation of extractives with height levels in rubberwood (Hevea brasiliensis) / Fadhil Roslan. [Student Project] (Unpublished)

S

Saffii, Mariam (2005) Strength properties of the OSB mix from acacia 70% and sesendok 30% with 500kg/m3 and resin content 5% / Mariam Saffii. [Student Project] (Unpublished)

Saharuddin, Shah Faizal (2005) The distribution study of Macaranga gigantea in UiTM Jengka Forest Reserve (base line 1: Line 1-Line 5 and logging road) / Shah Faizal Saharuddin. [Student Project] (Unpublished)

Salleh, Suhaizul (2005) Height and diameter growth of latex timber clone rubberwood / Suhaizul Salleh. [Student Project] (Unpublished)

Samsury, Mohd Ridzuan (2005) Properties of particleboard from juvenile acacia mangium at 800kg/m3 with 7%, 9% and 11% resins / Mohd Ridzuan Samsury. [Student Project] (Unpublished)

Shafie, Rusmaza (2005) Bending properties of oriented strand board (OSB) from mix Acacia and Mahang at 7 % resin content with different density / Rusmaza Shafie. [Student Project] (Unpublished)

Shalahudin, Mohd Fahmi (2005) Termites: damage to wood and how to control them / Mohd Fahmi Shalahudin. [Student Project] (Unpublished)

Siamit, Ali (2005) Density and specific gravity of Kenaf (Hibiscus cannabinus) according stem and branch / Ali Siamit. [Student Project] (Unpublished)

Subardi, Siti Aidaliza and Mohamad, Noorfazurah and Abd Rani, Sri Normaysarah (2005) Properties of homogenous and three-layer particleboard from Ketapang and oil palm particles / Siti Aidaliza Subardi, Noorfazurah Mohamad and Sri Normaysarah Abd Rani. [Student Project] (Unpublished)

Sukur, Noordiana (2005) Pre liminary study on board from oil palm trunk, (elais guineenssiJacq), with density of 600 kg/ m3 at 5% phenol formaldehyde resin / Noordiana Sukur. [Student Project] (Unpublished)

Sultang, Abdulrahman (2005) Fiber morfological properties of Kenaf (Hibiscus cannabinus) / Abdulrahman Sultang. [Student Project] (Unpublished)

T

Tuan Coob, Tuan Idayu (2005) Properties of particleboard from juvenile Acacia mangium at 800 kg/m3 with 6 %,8 % and 10 % UF resin / Tuan Idayu Tuan Coob. [Student Project] (Unpublished)

W

Wahab, Muhammad Khairul Anwar (2005) Water-borne preservatives: benefits and hazards / Muhammad Khairul Anwar Wahab. [Student Project] (Unpublished)

Z

Zahari, Md Al Kusaire (2005) Survey on the failure factor in wood jointing / Md Al Kusaire Zahari. [Student Project] (Unpublished)

Zahari, Zariana (2005) The development of wood panel industry in Malaysia / Zariana Zahari. [Student Project] (Unpublished)

Zulkifli, Zati Bayani (2005) Peripheral milling machines in wood industry / Zati Bayani Zulkifli. [Student Project] (Unpublished)