Items where Division is "Faculty of Mechanical Engineering" and Year is 2004

Group by: Creators | Item Type | No Grouping
Number of items: 62.

Article

Manufacturing plant performance evaluation by discrete event simulation / Rosli Darmawan ... [et al.]. (2004) Journal of Mechanical Engineering (JMechE), 1 (1). pp. 1-14. ISSN 1823-5514 ; 2550-164X

Inspection - Hole shape optimization of a lower wing panel based on geomatric boundary shapes / Wahyu Kuntjoro and Zon S. Hernedhi. (2004) Journal of Mechanical Engineering (JMechE), 1 (1). pp. 39-50. ISSN 1823-5514 ; 2550-164X

Adaptive active force control of a robotic arm employing twin iterative learning algorithms / Musa Mailah and Ong Miaw Yong. (2004) Journal of Mechanical Engineering (JMechE), 1 (1). pp. 51-63. ISSN 1823-5514 ; 2550-164X

Utilisation of indigenous resources for acoustical applications / Valliyappan D. Natarajan and Mohd Jailani Mohd Nor. (2004) Journal of Mechanical Engineering (JMechE), 1 (1). pp. 29-37. ISSN 1823-5514 ; 2550-164X

Emission characteristics of palm oil shell in a cascading hearth staged combustor / Wan Ahmad Najmi Wan Mohamed. (2004) Journal of Mechanical Engineering (JMechE), 1 (1). pp. 15-27. ISSN 1823-5514 ; 2550-164X

Thesis

Robotics technology in car seat polyurethane injection process for small and medium size industries in Malaysia / Syairul Izam Ab Ghani and Mohd Shuhidan Saleh. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

A study on low blow impact and residual strength of glass/epoxy and polypropylene (PP) polymer composites / Siti Fatimah Abait. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Cleaning automotive part using fluidized bed reactor / Mohd Naqiyuddin Abdul Aziz. (2004) Degree thesis, thesis, Universiti Teknologi MARA.

Mode of failure analysis of fiber reinforced composite plate / Ahmad Zuwairi Abdul Latiff. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Analysis of the exhaust emission on the variable spark strength with stoichiometric air - fuel ratio / Mohd. Alias Abdullah. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Develop a remote controlled aircraft for high tension cable inspection / Ahmad Reduean Ahmad Takrim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Cold room design / Rashdan Awang@Abdulah. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Fire simulation protocol and the role of a CFD software / Cliff Bidi. (2004) Masters thesis, thesis, Universiti Teknologi MARA.

A study on the effects of compositions on the mechanical properties of polymer mixed concrete / Mohd Aswadi Elias. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Rheological study of MIM water soluble binder system / Mohamad Fahmi Ghazali. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Automobile air-conditioning using solar energy / Nor Hazila Haron. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Slow crack growth of polymer mixed concrete under constant load / Norzarina Haroni. (2004) Degree thesis, thesis, Universiti Teknologi MARA.

Thrust test stand for pulse jet engine / Hamirul Adli Hashim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Develop a remote control aircraft for crop spraying / Noor Shuhada Hussin. (2004) Degree thesis, thesis, Universiti Teknologi MARA.

The optimization of lamination scheme and ply thickness for laminated composite plates / Hamedan Ibrahim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

A case study of resistance system towards fisherman's boat in Kuala Selangor / Mohd Faizal Ibrahim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Analysis of thermo-mechanical behavior for ceramic powder during cold and warm compaction processes / Mohd Sani Jamailudin and Mohamed Azwa Hasshim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Impact performance and fracture toughness of PMC and PMC/FRP composite / Mohammad Helmi Jusoh @ Ibrahim. (2004) Degree thesis, thesis, Universiti Teknologi MARA.

Effect of flow rate on development of microstructure by MIG welding / Muhamad Rizal Khalid. (2004) Degree thesis, thesis, Universiti Teknologi MARA.

Slow crack growth of polymer mixed concrete under constant load / Ikhairul Hamin Mat Ghani. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

The concept of vertical take-off and landing by using UAV mini model / Abdullah Syahril Mat Jani. (2004) Degree thesis, thesis, Universiti Teknologi MARA.

Fabrication of filament winding machine / Mohd Fadzli Mazlan. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Comparative study on air felter products in air conditioning industry / Md Adharuddin Md Arif. (2004) Degree thesis, thesis, Universiti Teknologi MARA.

Develop a remote control aircraft for crop spraying / Nur Azureen Md. Tahir. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Cold room design / Mohd Nuh Miskan. (2004) Degree thesis, thesis, Universiti Teknologi MARA.

Measuring wind speed and direction using fiber optic technology / Nor Hisham Mohamed. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

A study of the effects of carburizing on fatigue characteristics of a cannon barrel / Hanafiah Mohd Ali and Mohamad Riza Ebrahim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Fabrication of filament winding machine / Amir Shah Mohd Ariff. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Evaluation of R-12 performance in car air conditioning / Azizulfaizei Mohd Ariff. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Micro Aerial Vehicle / Mohd Hezri Mohd Ghani and Hamidi Yusof. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Sintering study in metal injection molding (MIM) process / Mohd Khuzairy Mohd Yusof. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

A case study of resistance system towards fisherman's boat in Kuala Selangor / M. Mahatir Momsarip. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Fabrication of Eddy Current Probe for SS 304 tube inspection / Muhamad Hazly Muhamad Nordin. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Automobile air-conditioning using solar energy / Rashita Rashidin. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Regulated combustion chamber as a thrust initiator / Noor Edzwan Hishamuddin Sadarudin. (2004) Degree thesis, thesis, Universiti Teknologi Mara (UiTM).

Determination of primary specifications of an oil palm biomass processing machine through quality function deployment / Mahmudin Saleh. (2004) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Regulated combustion chamber as a thrust initiator / Mohd Nur Affendi Sallehuddin. (2004) Degree thesis, thesis, Universiti Teknologi Mara (UiTM).

Rheological study of MIM water soluble binder system / Muliaty Samsuri. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Production improvement through work study techniques / Zainoor Hailmee Solihin and Mohd Fadzrul Ahmad. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Evaluation of design parameters for air cyclone system in palm oil mill / Ahmad Shakir Suukhi. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

The waste oil burner / Adnan Yusoff. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

An overview of the CIM implementation / Mohd Zaidi Zawawi. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Student Project

Comparative study on air filter products in air conditioning industry / Ahmad Fairuz Abdul Hamid and Md Adharuddin Md Arif. (2004) [Student Project] (Unpublished)

Study development of micro mold for injection molding process / Mohamad Norsharizal Abdul Rahman and Mohamad Faizul Selamat. (2004) [Student Project] (Unpublished)

The study of filtration on oil & gas applications / Zulkifli Baba and Azizul Ariffin. (2004) [Student Project] (Unpublished)

Design test fixture for high cycle fatigue on polymer mixed concrete / Rosliezan Md Husain and Yusnizam Abd Jalil. (2004) [Student Project] (Unpublished)

Homogenous feedstock for metal injection molding (MIM) process / Yusb Ishaq Mohamad and Mior Sharul Nizam Mior Ahmad. (2004) [Student Project] (Unpublished)

Performance analysis in manufacturing industry using QUEST simulation software / Zuriadi Mohamed and Mohd Afzakhairy Ahmad Farouk. (2004) [Student Project] (Unpublished)

Cake slicer / Mohd Taufiq Mohd Sharudin ... [et al.]. (2004) [Student Project] (Unpublished)

Virtual material science laboratory manual / Muhammad Nazri Nayan and Mohammad Azizi Abdullah. (2004) [Student Project] (Unpublished)

Fracture toughness of polymer-mixed concrete / Muhamad Shah Osmin and Mohd Harif Mat Yusuf. (2004) [Student Project] (Unpublished)

CAD, CAE and CAM of solid disc brake, and the foundry process / Mohamad Izam Sahab and Jamal Nahar Musa. (2004) [Student Project] (Unpublished)

Fatigue strength of polymer-mixed concrete with and without added waste fibre / Md. Ruhaizat Sapar and Rosita Priman. (2004) [Student Project] (Unpublished)

Propeller test stand / Syed Khomeini Syed Hassan and Abd Manan Abd Rahman. (2004) [Student Project] (Unpublished)

Building energy savings / Wan Sulaiman Wan Mohamad and Muhamad Nizam Ab. Wahab. (2004) [Student Project] (Unpublished)

F.A.D.S rollerable owning / Abdussalam Zulkifli ... [et al.]. (2004) [Student Project] (Unpublished)

Entrepreneurship Project

Advantech Consultancy / Muhammad Zuhilmi Zakaria ... [et al.]. (2004) [Entrepreneurship Project] (Unpublished)

This list was generated on Fri Mar 29 11:14:22 2024 UTC.