Trio Auto Aquarium / Shafiq Nordin & Muhammad Fazdli Hisham Md Puad

Trio Auto is a project designed to provide convenience and advantage to those who use it. The goal of this project is to assist and develop the system of human life to the fans of fish reared in the aquarium. In this project, is expected to earn a place in the market based on the method used. Not only that, this project is expected to be environmentally friendly and user friendly. The calculated value can be obtained using the simulation software proteus 8.0. The simulation software can be used to obtain and examine the components corresponding to the circuit used in this project. In addition, this project is use a PIC16F628A. This PIC is coding by using the micro C Pro software. This coding purposes is to program the timer relay circuit. The timer an be run after the PIC is coding and use a PIC boot loader as a link from software to hardware. This project have use a 2 timer which is for lighting system and feeding system. The timer of lighting system is set 10 hours every day from 8 p.m. until 6 a.m. The timer of feeding system is set to 10 second every 6 hours every day. Besides that, the function of voltage regulator as a voltage controller coordinated circuit. This circuit is used as a connector from the AC power supply 240V and going through DC adapter 12V and the output is 5V. Then, the cleaning process of aquarium is take a 3 minute to clean the water. This time will be reduce if the foulness in the water is clean faster than the time expected. This process is easy because it is have a piping system and just use the concept of pressure only to clean the aquarium water. It is observe that the process of timer and cleaning process will operate when the motor will be functional very well.