Polyurethane (PU) is widely used in the grouting industry for its high compressive strength and durability. However, the reliance on petroleum-based polyols and ozone-depleting hydrochlorofluorocarbons (HCFCs) as blowing agents raises significant environmental concerns. This study evaluates sustainable alternatives by developing a green PU using castor oil-based polyol and water (H2O) as a blowing agent. The research was conducted in three stages. First, optimizing the polyol-to-isocyanate ratio using industrial polyurethane (PI). The 1:1 ratio demonstrated superior performance, exhibiting moisture absorption below 12%, lower viscosity, reduced weight, and a uniform, densely packed cellular morphology. Secondly, synthesize and compare the properties of green PU with different blowing agents (HCFC 141b and H2O). All formulations met grouting standards, with cream times of 10–20 s and rise times exceeding 48 s. The water-blown castor oil polyurethane (PCW) showed the lowest apparent density while maintaining compressive strength (30–150 kPa) and modulus (150–500 kPa) within standard requirements. FTIR analysis confirmed that all ratios are completely cured. Lastly, performing a comparative analysis of the environmental stress cracking resistance (ESCR) and antibacterial testing. The durability assessments through soil burial and chemical immersion revealed that PCW maintained moisture absorption below 12% and exhibited a 15–20% increase in compressive strength over 90 days. Furthermore, PCW displayed intrinsic antimicrobial activity against B. subtilis and E. coli. These findings demonstrate PCW's strong potential as a sustainable grouting material with reduced environmental impact.
| Item Type: | Thesis (PhD) |
|---|---|
| Creators: | Creators Email / ID Num. Mohd Fauzi, Fatin Nur Azmina UNSPECIFIED |
| Contributors: | Contribution Name Email / ID Num. UNSPECIFIED Bonnia, Noor Najmi UNSPECIFIED UNSPECIFIED Abd Rahman, Zurianti UNSPECIFIED UNSPECIFIED Hizrin, Radin Siti Fazlina Nazrah UNSPECIFIED |
| Subjects: | T Technology > TP Chemical technology > Polymers and polymer manufacture T Technology > TP Chemical technology > Oils, fats, and waxes |
| Divisions: | Universiti Teknologi MARA, Shah Alam > Faculty of Applied Sciences |
| Programme: | Doctor of Philosophy (Science) |
| Keywords: | Polyurethane, PU, Castor oil-based polyol, Grouting material, Blowing agent, Environmental stress cracking resistance, ESCR, Antimicrobial activity |
| Date: | June 2026 |
| URI: | https://ir.uitm.edu.my/id/eprint/149198 |
149198_fulltext.pdf
Available under License Dasar Harta Intelek UiTM (Para 6).
declarationform.pdf
Restricted to Repository staff only


