Auto safety system

The helmet is design to create extra precautions for the motorcyclist before and during their journey to their destination. This helmet consists of two functionalities which are indicator system and communication system. For indicator system, this helmet indicates the motorcyclist to clip the helmet neatly. A parallel circuit that connects the Light Emitter Diode (LED) for light and buzzer for the sound that will trigger once the motorcyclist wear the helmet. For the communication system, the concept system of walkie-talkie is been used in this system. This system helps the motorcyclist to communicate if there is anything goes wrong during their journey especially a grouping motorcyclist. Both of the systems were simulated in Proteus 8.0 software which is simulating the circuit if it can produce the output that desired. The design of the circuit which is Printed Circuit Board (PCB) also designed in the Proteus 8.0. The power supply is just using a dry cell which is 9V for the indicator system and three (3) 1.5 V battery for the communication system’s circuit. The overall result is quiet satisfied which is the software and hardware is functioning based on desired output. For the indicator system, the hardware is to do a wiring in the helmet. For the communication system, the circuit is just the PCB board that is stick to the side of the helmet. It is observed that the output that desired is successful. The project works based on desired objectives of this project.