Reinforced concrete building design project & project based learning (case study)

To sum up to this project, I have learned methods of manual calculation on structural member in the building. This report consists of both manual and software calculation by using Prokon 4.0 and the value are based on my own assumptions. All the calculation in this report are referred to the Eurocode and The National Annex to make sure that the design criteria are referred to the method of calculation before proceeding to real construction work. But before we design a building, a house or any construction, we need to know all the details of the architectural drawings. This is because we need to follow the specifications that the architect has made. Then, we need to allocate the location of the structures such as beam, columns, loads on all slabs. After that, we can start selecting the critical structure of our project and start the designing the structure by considering the selected structure such as slabs that attached to the critical beams and columns that attached with the critical beam. Detailing are important in construction sites in order to build an exact building as told in the contract document by supervision of contractor and other expe11ise. Any errors in the details will lead to structure failure and unfortunate event to occur on site during construction work. As for case study, it is important to analyse the soil bearing capacity on the supposed building in order to build the building. This has to be taken into account so that we can build the suitable design of pad footing in the soil condition site investigation. The data that have been calculated need to re-check to reduce the error from software or from manual calculation itself