Items where Subject is "Polypropylene"

.

., Salmah and Ismail, H. and Abu Sakar, A. (2006) The effect of maleic anhydride-grafted polypropylene (MAPP) on properties of paper sludge and kaolin filled polypropylene (PP)/ethylene propylene diene terpolymer (EPDM) hybrid composites / Salmah, H. Ismail and A. Abu Sakar. (2006) In: Volume No. 1: Science and Technology, 30 – 31 May 2006, Swiss Garden Resort & Spa Kuantan, Pahang.

A

A. H., Siti Atkah and Mustaffa, H. A. and Sahrim, H. A. and Abdul Aziz, M. (2002) Some microwave properties of lithium-nickel-zinc (lnz) ferrites thermoplastic natural rubber (tpnr) composites / A. H. Siti Atkah … [et al.]. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

A. Rahman, Siti Nuur Fazllin (2007) Properties of wood plastic composite from 16 years old petai belalang (Leucaena leucocephala) / Siti Nuur Fazllin A. Rahman. (2007) [Student Project] (Unpublished)

Abd Aziz, Syahrul Azli (2008) Coconut husk fibre reinforced polypropylene composite / Syahrul Azli Abd Aziz. (2008) [Student Project] (Unpublished)

Abd Aziz, Syazwani (2019) Effect of copolymer maleic anhydride grafted polypropylene (MAGPP) in wood composite of cellulose from oil palm frond as a filler / Syazwani Abd Aziz. (2019) [Student Project] (Unpublished)

Abd Halim, Siti Aisyah Syafiqah (2020) The effect of different treatment method on mechanical, physical and characterization of sugarcane bagasse / polypropylene composite / Siti Aisyah Syafiqah Abd Halim. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Abd Karim, Mohd Syahir (2008) Mechanical property of polypropylene with kenaf fiber wood flour composite / Mohd Syahir Abd Karim. (2008) Degree thesis, thesis, Universiti Teknologi MARA.

Abd Razak, Mohd Shareizal (2005) Polypropylene plastic composite from resak / Mohd Shareizal Abd Razak. (2005) [Student Project] (Unpublished)

Abd. Wahab, Mahathir (2003) Thermoplastic composite from Anthocephalus Chinensis / Mahathir Abd. Wahab. (2003) [Student Project] (Unpublished)

Abdul Hamid, Hairul Amani and Ibrahim, Norazura and Raja Mohamed, Raja Roslan (2006) Foamability of natural rubber/polypropylene blend / Hairul Amani Abdul Hamid, Norazura Ibrahim and Raja Roslan Raja Mohamed. (2006) [Research Reports] (Unpublished)

Abdul Hamid, Siti Atkah and Mansor, Abdul Aziz (2001) Sifat magnet komposit ferit (Li0.5Fe0.5)0.4Ni0.3Zn0.3Fe2O4 – termoplastik getah asli / Siti Atkah Abdul Hamid and Abdul Aziz Mansor. (2001) GADING Jurnal UiTM Cawangan Pahang, 6 (1 & 2): 8. pp. 83-95. ISSN 0128-5599

Abdul Jalil, Noor Asyiqen (2001) Properties of paper sludge - polypropylene composite in relation to the addition of map / Noor Asyiqen Abdul Jalil. (2001) [Student Project] (Unpublished)

Abdullah, Nor Hidayani (2012) Properties of wood plastic composites (WPC) from Batai spp. (Paraserianthes falcataria) / Nor Hidayani Abdullah. (2012) [Student Project] (Unpublished)

Abdullah, Siti Saerah (2004) Manufacturing of thermoplastic composite from Karas (Aquilaria Malacensis) / Siti Saerah Abdullah. (2004) [Student Project] (Unpublished)

Adnan, Shahira (2020) The effect of different silane coupling agent concentration towards physical and mechanical properties of polypropylene / banana composite / Shahira Adnan. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Ahmad, Mohd Fauzi (2005) Properties of polypropylene composite using resak saw dust as fillers (unscreened and 40 mesh size) / Mohd Fauzi Ahmad. (2005) [Student Project] (Unpublished)

Ahmad, Mohd Hafiz (2004) Thermoplastic composite from Keruing Belimbing (effects of particle size and filler content) / Mohd Hafiz Ahmad. (2004) [Student Project] (Unpublished)

Ahmad, Nur Aina Shahida (2022) Hydrothermal synthesis of cobalt doped tin (IV) oxide for microplastic removal / Nur Aina Shahida Ahmad. (2022) [Student Project] (Unpublished)

Ahmad, Syukri and Syahmi, Eizlan and Nizu, Aminah and Johari, Afiqah and Mustafa, Haikal (2018) Thermal property of polypropylene (PP) / recycle polyethylene terephthalate (rPET) blends / Syukri Ahmad ... [et al.]. (2018) [Student Project] (Unpublished)

Ahmad Puzi, Norfazila (2005) Properties of Resak- polypropylene (PP) Composite / Norfazila Ahmad Puzi. (2005) [Student Project] (Unpublished)

Aref, Aina and Said, Salihin and Zainy, Fadhilah and Mustafa, Haikal and Tan, Suhee and Wahit, Mat Uzir (2018) Mechanical properties of PP/RPET blends and PP-g-MAH as compatibilizer / Aina Aref ... [et al.]. (2018) [Student Project] (Unpublished)

Arifin, Siti Ilyani (2003) Manufacture of thermoplastic composite using Rubberwood sawmill waste / Siti Ilyani Arifin. (2003) [Student Project] (Unpublished)

Azmy, Wishal and Syahmi, Afiq and Mustafaa, Haikal and Wahid, Mat Uzir and Tan, Suhee Mechanical properties of PP/RPET blends / Wishal Azmy ...[et al.]. [Student Project]

B

Bahari, Shahril Anuar and Yahya, Mohd Khairi and Abu Kassim, Masitah and Muhammad, Khairul Safuan and Baharom, Rahimi (2011) Electrical resistivity and flexural strength of plastic composites reinforced with pineapple leaf particles / Shahril Anuar Bahari ... [et al.]. (2011) Scientific Research Journal, 8 (2). pp. 1-11. ISSN 1675-7009

Bakri, Hartini (2000) Mechanical and water absoption properties of bamboo (Gigantoohloa scortechinii) thermoplastic composite / Hartini Bakri. (2000) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

D

Daud, Nik Norhafizah (2003) Thermoplastic composite from flaker waste / Nik Norhafizah Daud. (2003) [Student Project] (Unpublished)

E

Engku Zawawi, Engku Zaharah and Mohamed, Rahmah and Muhammed, Suhaimi (2000) The properties of composite panel manufactured from oil palm fibres and plastics / Engku Zaharah Engku Zawawi, Rahmah Mohamed and Suhaimi Muhammed. (2000) GADING Jurnal UiTM Cawangan Pahang, 5 (4): 4. pp. 25-31. ISSN 0128-5599

G

Ghani, Nor Fadhillah (2003) Thermoplastic making from chipboard waste / Nor Fadhillah Ghani. (2003) [Student Project] (Unpublished)

Ghazali, Rohaida (2008) Properties of wood plastic composite using Mahang spp. with different particle sizes / Rohaida Ghazali. (2008) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

H

Hashim, Mohd Jafni (2011) Properties of oil palm empty fruit bunch fibers, coconut husk and polypropylene composite - potential furniture material / Mohd Jafni Hashim. (2011) [Student Project] (Unpublished)

I

Ismail, Aswadi Amirun (2005) Physical and mechanical properties of polypropylene composite with Resak sawdust (60 mesh size) as filler / Aswadi Amirun Ismail. (2005) [Student Project] (Unpublished)

J

Jamaluddin, Nazirah and Abd Latif, Nur Syuhada (2011) Wood plastic composite from Batai (Paraserianthes falcataria) / Nazirah Jamaluddin and Nur Syuhada Abd Latif. (2011) [Student Project] (Unpublished)

Jasin, Mohd Saifuldin (2001) Thermoplastic composite from Mahang Kapur (m. hoseii) / Mohd Saifuldin Jasin. (2001) [Student Project] (Unpublished)

Jasmi, Nor Farhana and Kasim, Jamaludin and Che Hussin, Muslyza (2015) Effects of coupling agent on mechanical properties and water absorption of oil palm frond-polypropylene composite / Nor Farhana Jasmi, Jamaludin Kasim and Muslyza Che Hussin. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Jipiu, Ronald Peter (2002) Properties of thermoplastic composite from Araucaria hunstenii / Ronald Peter Jipiu. (2002) [Student Project] (Unpublished)

Johari, Nur Assuraya (2004) Manufacturing of thermoplastics composite from Karas (Aquilaria malaccensis) Polypropylene (PP) / Nur Assuraya Johari. (2004) [Student Project] (Unpublished)

K

Kalam, Anizah (2010) Characterisation and properties of Oil Palm Fruit Bunch (OPFB)/ Polypropylene (PP) composites, PP Nanoclay/PP and OPFB/PP Nanoclay/PP Hybrid Composites / Anizah Kalam. (2010) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Kamaludin, Mustaza (2011) Potential of coconut sawdust as a new material for furniture product/ Mustaza Kamaludin. (2011) [Student Project] (Unpublished)

Kamardin, Nur Kamarliah (2017) Mechanical properties and fracture toughness of polypropylene reinforced kenaf fibre and nanoclay composites / Nur Kamarliah Kamardin. (2017) Masters thesis, thesis, Universiti Teknologi MARA.

Kamhar, Siti Rasyidah (2002) Properties of Ludai - Polypropylene (PP) thermoplastic composite / Siti Rasyidah Kamhar. (2002) [Student Project] (Unpublished)

Kasim, Jamaludin and Yamani, Shaikh Abdul Karim and Shafie, Amran (2002) Effects of filler loading and maleated anhydride polypropylene addition on some selected properties of bamboo thermoplastic composite / Jamaludin Kasim, Shaikh Abdul Karim Yamani and Amran Shafie. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Kasnan, Siti Nor Fazida (2002) Ludai (Sapium buccatum) - polypropylene composite: effecf of filler loading / Siti Nor Fazida Kasnan. (2002) [Student Project] (Unpublished)

Khairudin, Faerul Hafiz (2011) Properties of thermoplastic composite using sesendok and kelempayan sawdust with different percentage of polypropylene / Faerul Hafiz Khairudin. (2011) [Student Project] (Unpublished)

M

M., Haikal and M., Nurathirah and C.A.A, Nurfatini and Y., Azie Nasuha Thermal properties of blend of PP/RPET with PP-g-MAH as compatibilizer / Haikal M. ...[et al.]. [Student Project]

M. S, Junaidah and H. A, Mustaffa and H. A, Sahrim and H.Y, Ahmad Nazlim and A, Nazree (2004) Some microwave properties of yttrium iron garnet and magnetite filled thermoplastic natural rubber composites / Junaidah M. S …[et al.]. (2004) In: STSS 2004 : SAINS TEKNOLOGI JILID 1, 31 MEI – 1 JUN 2004, HOTEL VISTANA, KUANTAN, PAHANG.

Mahmud, Siti Zalifah and Kasim, Jamaludin and Suid, Nurul Hamiza and Mohd Sabri, Khuzaimah and Mohamad, Ahmad Shukri (2009) Effects of bulk density, filler ratio and particle geometry toward thermoplastic composite from oil palm residues / Siti Zalifah Mahmud …[et al.]. (2009) In: UNSPECIFIED.

Mahmud, Zuhana and Abd Aziz, Abd Haqeem and Zaiton, Siti Haziah (2005) Properties of thermoplastic composite from Oil Palm / Zuhana Mahmud, Abd Haqeem Abd Aziz and Siti Haziah Zaiton. (2005) [Student Project] (Unpublished)

Manggan, Ngadang (2020) Effect of recycling process to the physical and mechanical properties of polypropylene / Ngadang Manggan. (2020) [Student Project] (Unpublished)

Mansor, Abdul Aziz and Abdul Hamid, Siti Atkah (2001) Mikrostruktur dan morfologi komposit getah asli termoplastik - garnet itrium besi (PP/NR –Y3Fe5O12) / Abdul Aziz Mansor and Siti Atkah Abdul Hamid. (2001) GADING Jurnal UiTM Cawangan Pahang, 6 (1 & 2): 9. pp. 97-108. ISSN 0128-5599

Masri, Zuraini (2004) Properties of Keruing Belimbing (Dipterocarpus grandiflorus) sawdust - polypropylene thermoplastic composite / Zuraini Masri. (2004) [Student Project] (Unpublished)

Mat Hassan, Siti Sabariah (2003) Manufacture of thermoplastic from MDF waste / Siti Sabariah Mat Hassan. (2003) [Student Project] (Unpublished)

Mat Lazim, Siti Nor (2004) Effect of particle size, filler loading and mapp addition on Keruing Belimbing thermoplastic composite / Siti Nor Mat Lazim. (2004) [Student Project] (Unpublished)

Mat Saat, Nurul Asmizah (2008) Properties of wood plastic composite using empty fruit bunch with different filler loading / Nurul Asmizah Mat Saat. (2008) [Student Project] (Unpublished)

Mohamad, Anizah (2004) Properties of Karas (unscreened sawdust) polypropylene thermoplastic composite in relation to filler loading / Anizah Mohamad. (2004) [Student Project] (Unpublished)

Mohamad, Noraini (2002) Some selected properties of polypropylene composite using Ludai particles as fillers / Noraini Mohamad. (2002) [Student Project] (Unpublished)

Mohamad Khairudin, Mohd Syazwan (2015) Effect of electrical insulation breakdown voltage of XLPE with added polypropylene 30% fiber glass filler / Mohd Syazwan Mohamad Khairudin. (2015) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohamed, Ariff (1999) Rice husk filled thermoplastic composite / Ariff Mohamed. (1999) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Mohamed @ Mohd Jusoh, Juliya (2002) Ludai particles as a fillers in polypropylene thermoplastic composite / Juliya Mohamed @ Mohd Jusoh. (2002) [Student Project] (Unpublished)

Mohd Adnan, Umar Iqqbal Al-Biruni and Rashiddy Wong, Freddawati and Morni, Mohamad Firhan and Abdullah, Abdul Hakim and Abd Rashid, Amirul and Soon, Kong Yong (2023) Mechanical properties of rice husk-recycled polypropylene composite / Umar Iqqbal Al-Biruni Mohd Adnan ... [et al.]. (2023) Journal of Mechanical Engineering (JMechE), 12 (1): 3. pp. 45-61. ISSN 1823-5514 ; 2550-164X

Mohd Arifin, Zuliana (2008) Polypropylene blend with charcoal / Zuliana Mohd Arifin. (2008) [Student Project] (Unpublished)

Mohd Shah, Aziurah and Zaharudin, Aznifa Mahyam and Budin, Salina (2009) Effect of surface treatment on morphology and mechanical properties of polypropylene reinforced kaolin / Aziurah Mohd Shah, Aznifa Mahyam Zaharudin and Salina Budin. (2009) [Research Reports] (Unpublished)

Mohd Surur, Bashirah (1999) Lignocellulosic thermoplastic composite from shredded waste paper / Bashirah Mohd Surur. (1999) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Mohd Termuji @ Ahmad, Mohamad Hasni (2005) Thermoplastic composite from resak sawdust (unscreen) using polypropylene as matrix / Mohamad Hasni Mohd Termuji @ Ahmad. (2005) [Student Project] (Unpublished)

Mohd Zaidi, Nurizyan Amirah (2022) Synthesis of palladium doped tin oxide via hydrothermal method and their photocatalytic performance on microplastic removal / Nurizyan Amirah Mohd Zaidi. (2022) [Student Project] (Unpublished)

Mohd Zain, Maisarah Izzati (2020) Characterization, physical and mechanical properties of surface modified rice husk / polypropylene composite / Maisarah Izzati Mohd Zain. (2020) Degree thesis, thesis, Universiti Teknologi MARA Perlis.

Mohd Zain, Normuhaizah (2010) A study on the effect of mechanical properties and rheological behaviour of polypropylene reinforced montmorillonite / Normuhaizah Mohd Zain. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohtar, Mohd Afiq and Mohd Saidi, Nur Syuhada and Wan Ibrahim, Wan Azlin (2008) Wood plastic composite from Senduduk / Mohd Afiq Mohtar, Nur Syuhada Mohd Saidi and Wan Azlin Wan Ibrahim. (2008) [Student Project] (Unpublished)

Muda, Sukry (1998) Reinforcement of plastic composite with bamboo fibers / Sukry Muda. (1998) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

N

Nasri, Ainul Kamaliah (2004) Properties of Keruing belimbing sawdust polypropylene composite in relation to particle size and filler loading / Ainul Kamaliah Nasri. (2004) [Student Project] (Unpublished)

Nik Rusly, Nik Ruslianty (2022) A review on the preparation of superhydrophobic polypropylene coating / Nik Ruslianty Nik Rusly. (2022) Degree thesis, thesis, Universiti Teknologi Mara.

O

Othman, Norfaezatul Alysa (2022) Polypropylene microplastics removal using Fe based electrode via electrocoagulation method / Norfaezatul Alysa Othman. (2022) [Student Project] (Unpublished)

R

Ramli, Muhammad Faris (2020) Cotton biochar polypropylene composite : the study of mechanical properties / Muhammad Faris Ramli. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Ramly, Nur Balqis Ashraf (2012) Properties of wood plastic composite from azadirachta excels / Nur Balqis Ashraf Ramly. (2012) [Student Project] (Unpublished)

Razali, Mohd Khairul Effendy (2005) Mechanical and physical properties using resak sawdust as filler in the manufacturing of thermoplastic / Mohd Khairul Effendy Razali. (2005) [Student Project] (Unpublished)

Robin, Meilda and Simon, Sylvia (2008) Properties of wood plastic composite from Acacia mangium sapling / Meilda Robin and Sylvia Simon. (2008) [Student Project] (Unpublished)

Rozlan, Nurfazlya (2017) Tensile properties of bottom ash filled polypropylene composites / Nurfazlya Rozlan. (2017) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Rozlan, Nurfazlya and Vargis, Christina (2017) Tensile properties of bottom ash filled polypropylene composites: article / Nurfazlya Rozlan and Christina Vargis. (2017) pp. 1-5.

Rukman, Nusoibah Naahidhah (2008) Processing and thermal analysis of palm oil and dye filled polypropylene / Nusoibah Naahidhah Rukman. (2008) [Student Project] (Unpublished)

S

Saad, Mohamad Jani and Din, Rozman and Mohd Ishak, Zainal Arifin (2006) Compatibilizer influence on the empty fruit bunch-polypropylene composites / Mohamad Jani Saad, Rozman Din and Zainal Arifin Mohd Ishak. (2006) In: Volume No. 1: Science and Technology, 30 – 31 May 2006, Swiss Garden Resort & Spa Kuantan, Pahang.

Samsudin, Fatihah (2008) Properties of wood plastic composite using Mahang Gajah (macaranga gigantea) with different filler loading / Fatihah Samsudin. (2008) [Student Project] (Unpublished)

Sharif, Norhaslina (2004) Effects of particle size and filler content on the thermoplastic composite properties from Keruing Belimbing / Norhaslina Sharif. (2004) [Student Project] (Unpublished)

Sinteh, Larisstina (2006) Properties of wood plastic composites from Petai Belalang (Leucaena leucocephala) / Larisstina Sinteh. (2006) [Student Project] (Unpublished)

Suhaimi, Muhammad Nur Aiman (2020) Exploiting high-speed air bag models to quantify reliability in non-destructive evaluation / Muhammad Nur Aiman Suhaimi. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

T

Tuan Coob, Tuan Idayu (2008) Properties of wood plastic composite using oil palm empty fruit bunch with different particle size / Tuan Idayu Tuan Coob. (2008) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

W

Wan Jusoh, Wan Nahdatul Asykin (2001) Some selected properties of paper sludge polypropylene composite / Wan Nahdatul Asykin Wan Jusoh. (2001) [Student Project] (Unpublished)

Y

Ya'acob, Mohamad Ismail and Abd Manan, Mohammad Zuraidi and Abu Mansor, Mohamad Firdhaus and Md Jasimin, Muhd Adi Fikri (2008) Sifat-sifat thermoplastic komposit daripada Kenaf (Hibiscus cannabinus) / Mohamad Ismail Ya'acob … [et al.]. (2008) [Student Project] (Unpublished)

Yaakub, Yusairi (2002) Thermoplastic composite from Macarangga hoseii polypropylene / Yusairi Yaakub. (2002) [Student Project] (Unpublished)

Yamani, Shaikh Abdul Karim and Kasim, Jamaludin and Haslina, Siti Nor Haslina (2005) Properties of keruing belimbing-polypropylene composites / Shaikh Abdul Karim Yamani, Jamaludin Kasim and Siti Nor Haslina. (2005) In: Prosiding KONAKA Konferensi Akademik 2005, 13 -15 Disember 2005, UiTM PAHANG.

Yeop Idris, Nur Laili (2020) Mechanical and physical properties of unsaturated polyester resins modified with devulcanized ethylene polypropylene diene monomer waste / Nur Laili Yeop Idris. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Z

Zafakali, Juwairiah (2013) Properties of weathered oil palm trunk plastic composite in relationship to filler loading, particle size, filler loading and mapp addition/ Juwairiah Zafakali. (2013) [Student Project] (Unpublished)

Zainudin, Mohd Azri (2013) Properties of wood plastic composite from different oil palm trunk region / Mohd Azri Zainudin. (2013) [Student Project] (Unpublished)

Zakaria @ Razali, Mohd Faizal (2002) Thermoplastic composite from Macarangga hoseii polypropylene with mapp / Mohd Faizal Zakaria @ Razali. (2002) [Student Project] (Unpublished)