Items where Subject is "Heat. Heat in its applications, as a source of power, etc"

A

Abd Jalil, Shukor and Jamaludin, Rohaizad (2003) To study the effects of heat treatment on the mechanical properties of weapon barrel / Shukor Abd Jalil and Rohaizad Jamaludin. (2003) [Student Project] (Unpublished)

Abdul Aziz, Azna Ainatasya Athira (2022) Investigation on different temperature of steam on a steam powered motor / Azna Ainatasya Athira Abdul Aziz. (2022) [Student Project] (Submitted)

Abdul Hadi, Mohd Hefni (2017) Design and fabricate heat exchanger for downdraft gasifier / Mohd Hefni Abdul Hadi. (2017) [Student Project] (Unpublished)

Abdullah Suhaimi, Abdullah Azmin (2020) The effects of different immersion media and temperatures on the compressive behaviour of arenga pinnata - silicone biocomposite / Abdullah Azmin Abdullah Suhaimi. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Abu Kassim, Muhammad Nadzmi (2015) Performance analysis of spiral plate heat exchanger using nanofluid aluminium (iii) oxide, AL2O3 / Muhammad Nadzmi Abu Kassim. (2015) [Student Project] (Unpublished)

Aid, Syadilla (2009) A study the utilization of waste heat from engine to run air conditioning system / Syadilla Aid. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Akam, Wimi (2009) Simulation of heat transfer efficiency for novel air cooling channels of a fuel cell bipolar plate / Wimi Akam. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Azman, Syahila (2021) A study of onset on Benard-Marangoi convection with internal heat generation / Syahila Azman. (2021) [Student Project] (Unpublished)

B

Basharon, Nor Akashah and Ismail, Abdul Halim Hafiz (1989) Perbandingan suhu permukaan dan pemindahan haba bagi dua buah dinding yang berlainan orientasi / Nor Akashah Basharon and Abdul Halim Hafiz Ismail. (1989) [Student Project] (Unpublished)

C

Che Mat, Mohammad Firdaus (2009) Experimental investigation into convective heat transfer of nanofluid at the entrance region under laminar flow conditions / Mohammad Firdaus Che Mat. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

F

F., Basrawi and K., Habib and H., Ibrahim and GC, Lee (2016) Effect of solar fraction on the economic performance of a solar air conditioning by an adsorption chiller / F. Basrawi et al. (2016) Jurnal Intelek, 9 (2). pp. 14-21. ISSN 2682-9223

Fadzli, Saidatul Maisarah (2015) Combined heat and power economic dispatch using Shuffled Frog Leaping Algorithm (SFLA) / Saidatul Maisarah Fadzli. (2015) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

J

Jamaludin, Rohaizad (2003) To study the effects of heat treatment on the mechanical properties of weapon barrel / Rohaizad Jamaludin. (2003) Degree thesis, thesis, Universiti Teknologi MARA.

Johari, Amir Harith (2020) The construction of salinity gradient solar pond for heat storage / Amir Harith Johari. (2020) [Student Project] (Unpublished)

K

Kamal Azman Shah, Siti Norshafiqah (2022) Investigation on pressure variation of steam on efficiency of steam powered motor / Siti Norshafiqah Kamal Azman Shah. (2022) [Student Project] (Submitted)

Kusni, Mohd. Harisuddin (2010) Experimental investigation on heat pipes as efficient heat transfer device / Mohd. Harisuddin Kusni. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

M

Mahfodz, Mohd Faudzi and Mat Yusof, Yumi Baizurah (1998) Kabinet pengering cili / Mohd Faudzi Mahfodz and Yumi Baizurah Mat Yusof. (1998) [Student Project] (Unpublished)

Mamat, Mohamad Hafiz and Parimon, Norfarariyanti and Zoolfakar, Ahmad Sabirin and Abdul Razak, Abdul Hadi and Banu, I.B. Shameem and Rusop, Mohamad (2020) The Effect of Annealing Temperature on Spin-Coated Zn-doped NiO film for humidity sensing applications / N.F.Q. Fahmi … [et al.]. (2020) Journal of Electrical and Electronic Systems Research (JEESR), 16. pp. 100-105. ISSN 1985-5389

Md Said, Atiqah Liyana and Ishak, Norlela and Tajjudin, Mazidah (2022) Implementation of fuzzy PID controller on hot air blower system / Atiqah Liyana Md Said, Norlela Ishak and Mazidah Tajjudin. (2022) Journal of Electrical and Electronic Systems Research (JEESR), 20: 10. pp. 70-76. ISSN 1985-5389

Mohapatra, Kailash and Mishra, Dipti Prasad (2015) Numerical investigation of heat transfer and fluid flow characteristics of an internally ribbed tube / Kailash Mohapatra and Dipti Prasad Mishra. (2015) Journal of Mechanical Engineering (JMechE), 12 (2). pp. 86-103. ISSN 1823-5514 ; 2550-164X

N

Najem, Majid Khaleel and Sultan, Jamal Nayief and Karash, Emad Toma and M. Ali,, Adel and A. Ibrhim, Hssein (2023) The influence of repeated heat treatments on the propagation of fatigue cracking of medium carburized steel / Majid Khaleel Najem … [et al.]. (2023) Journal of Mechanical Engineering (JMechE), 20 (3): 20. pp. 387-408. ISSN 1823-5514 ; 2550-164X

Nik Wan, Nik Shaphiran and Nik Ariff, Nik Sulhan (1996) Compression Coil Spring System / Nik Shaphiran Nik Wan and Nik Sulhan Nik Ariff. (1996) [Student Project] (Unpublished)

R

Rizuan, Mohd Ismail Rifdi (2017) A study on the relationship between heat build-up (HBU) and dynamic mechanical analysis (DMA) in truck tyre tread formulation / Mohd Ismail Rifdi Rizuan. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

S

Samuri, Sariman (1985) Study the performance of the four-stroke, four-cylinder petrol engine in the thermodynamic laboratory / Sariman Samuri. (1985) [Student Project] (Unpublished)

Sam’on, Izni Nadhirah (2020) Ant lion optimizer for solving unit commitment with solar photovoltaic integration / Izni Nadhirah Sam’on. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Sarip, Ahmad Syafiq Haqim (2024) Comparative evaluation of thermodynamic and thermoeconomic of steam superheaters / Ahmad Syafiq Haqim Sarip. (2024) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

T

Tijani, Alhassan Salami and Mohammed, Nazri and Werner, Witt (2012) Saving primary energy consumption through exergy analysis of combine distillation and power plant / Alhassan Salami Tijani, Nazri Mohammed and Werner Witt. (2012) Scientific Research Journal, 9 (2). pp. 65-86. ISSN 1675-7009

Y

Yunus, Naqiah and Kamis, Nur Ilyana and Shafie, Sharidan and Lim, Yeou Jiann and Rawi, Noraihan Afiqah (2025) Enhancing heat transmission with ternary nanofluid in mixed convection flow under the impact of convective heat flux / Naqiah Yunus ... [et al.]. (2025) Journal of Mechanical Engineering (JMechE), 22 (2): 11. pp. 149-161. ISSN e-ISSN: 2550-164X

Z

Zainal, Muhammad Haikal and Hassan, Oskar Hasdinor and Ab Samad, Liana Shakira and Ali, Ab Malik Marwan and Yahya, Muhd Zu Azhan (2016) Energy conversion from biodegradation of non-thermal pre-treated algae biomass for microbial fuel cell / Muhammad Haikal Zainal … [et al.]. (2016) Journal of Mechanical Engineering (JMechE), 13 (1). pp. 26-31. ISSN 1823-5514 ; 2550-164X

Zainuddin, Mohd Hafiz and Keya Nordin, Fadhlul Wafi (2005) Studies the effect of injection pressure with porosity level and hardness in hot chamber die Casting process / Mohd Hafiz Zainuddin, Fadhlul Wafi Keya Nordin. (2005) [Student Project] (Unpublished)

Zulkifli, Wan Ahmad Shahril (2017) The waste heat recovery for power generation from automotive exhaust using Thermal-electric Cell (TEC) / Wan Ahmad Shahril Zulkifli. (2017) [Student Project] (Unpublished)