Items where Division is "Faculty of Applied Sciences" and Year is 2013

Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | G | H | I | J | K | M | N | O | R | S | T | W | Z
Number of items: 58.

A

Abd Kadir, Azhari (2013) Properties of cement boards from different percentage of sodium silicate (na2si03) and oil palm trunk (opt) layers / Azhari Abd Kadir. (2013) [Student Project] (Unpublished)

Abdul Ghani, Aizuddin Arif (2013) Properties of finger joint from acacia mangium wood / Aizuddin Arif Abdul Ghani. (2013) [Student Project] (Unpublished)

Abdul Manan, Ahmad Razmi (2013) Mechanical and physical properties of particleboard from two different fast growing species / Ahmad Razmi Abdul Manan. (2013) [Student Project] (Unpublished)

Abdul Rahman, Hammad Asyraf (2013) The properties of three layer particleboard from oil palm fronds (elaeis guineensis) / Hammad Asyraf Abdul Rahman. (2013) [Student Project] (Unpublished)

Abdul Rashid, Ahmad Basirun (2013) Strength properties of sandwich panel made from medium density fiberboard and corrugated paperboard / Ahmad Basirun Abdul Rashid. (2013) [Student Project] (Unpublished)

Abdul Razak, Muhammad Hairul (2013) The factors that influence teak furniture sales at Temerloh town / Muhammad Hairul Abdul Razak. (2013) [Student Project] (Unpublished)

Abu Bakar, Normala (2013) Weathered oil palm trunk as alternative raw material for ceiling board (Elaeis guineensis) / Normala Abu Bakar. (2013) [Student Project] (Unpublished)

Ahmad Bostaman, Muhamad Iqbal (2013) Students' sitting posture and patterns in Universiti Teknologi MARA Pahang / Muhamad Iqbal Ahmad Bostaman. (2013) [Student Project] (Unpublished)

Amirruddin, Nur Aza Farahin (2013) Properties of acacia mangium wood cement board in relation to particle size and curing time / Nur Aza Farahin Amirruddin. (2013) [Student Project] (Unpublished)

Awal Ud-Din, Siti Hazimah (2013) Properties of particleboard from wild acacia mangium: effect of particle size and board thicknesss / Siti Hazimah Awal Ud-Din. (2013) [Student Project] (Unpublished)

Awang Rani, Syaiedeen (2013) Finishing properties of oil based paint on wood surfaces from two hardwood species / Syaiedeen Awang Rani. (2013) [Student Project] (Unpublished)

B

Buhari, Zamri (2013) Adjustable laptop table with diy concept / Zamri Buhari. (2013) [Student Project] (Unpublished)

C

Che Hamid, Che Zulkhairi Iswandi (2013) Multipurpose table using knockdown concept / Che Zulkhairi Iswandi Che Hamid. (2013) [Student Project] (Unpublished)

Che Kar, Muhamad Nasrulrahman (2013) Relationship of board density and resin contents towards the particleboard properties from weathered oil palm trunk / Muhamad Nasrulrahman Che Kar. (2013) [Student Project] (Unpublished)

Chek Romli, Mohd Hafiz (2013) Effect of portion and oven dry exposure towards surface roughness and bending strength of dendrocalamus asper / Mohd Hafiz Chek Romli. (2013) [Student Project] (Unpublished)

G

Ghazali, Nurul Halimah (2013) Mechanical and physical properties of particleboard made from acacia mangium species / Nurul Halimah Ghazali. (2013) [Student Project] (Unpublished)

Ghazali, Siti Nadzifah (2013) Adsorption of methylene blue onto xanthogenated-modified chitosan microbeads / Siti Nadzifah Ghazali. (2013) [Student Project] (Unpublished)

H

Halim, Halimatulsaadiah (2013) Properties of particleboard from Buluh Minyak (Bambusa vulgaris) / Halimatulsaadiah Halim. (2013) [Student Project] (Unpublished)

Haroon, Fazlinarulzaiha (2013) Ergonomic chair design for musculoskeletal disorder (MSD) / Fazlinarulzaiha Haroon. (2013) [Student Project] (Unpublished)

Hasanuddin, Asminudin (2013) Finishing properties of polyurethane lacquer on acacia wood / Asminudin Hasanuddin. (2013) [Student Project] (Unpublished)

I

Ismail, Asiah (2013) Distribution and potential origin of heavy metals air pollution around Gebeng industrial area / Asiah Ismail. (2013) [Student Project] (Unpublished)

J

Jamal, Umar Khattab (2013) Mechanical properties of finger joint from acacia manglum spp by adhesive types and tree portion / Umar Khattab Jamal. (2013) [Student Project] (Unpublished)

Jamil, Nur Hidayati (2013) Fabrication and characterization of SRO modified bioactive glass nano particle by quick alkali mediated sol gel method / Nur Hidayati Jamil. (2013) [Student Project] (Unpublished)

Jemain, Nur Ain (2013) Finishing properties on particleboard from Gliricidia sepium / Nur Ain Jemain. (2013) [Student Project] (Unpublished)

Johar, Shuhaili (2013) The effect of sealant as a finishing on a wood panel (plywood) / Shuhaili Johar. (2013) [Student Project] (Unpublished)

Johari, Nur Atiqah Nabilah (2013) Properties of particleboard made from acacia species: effects of resin content and hot press temperature / Nur Atiqah Nabilah Johari. (2013) [Student Project] (Unpublished)

K

Kamarudin, Muhammad Faiz (2013) Consumption of furniture made from panel products among bumiputeras at Bandar Tun Abdul Razak Jengka / Muhammad Faiz Kamarudin. (2013) [Student Project] (Unpublished)

M

Mahamad Zamal Shari, Nur Izzati (2013) Accumulation of heavy metals occurrence in industrial soils of Gebeng industrial area / Nur Izzati Mahamad Zamal Shari. (2013) [Student Project] (Unpublished)

Mahammad Asri, Nur Liyana Aifa (2013) Properties of rice husk particleboard for exterior use / Nur Liyana Aifa Mahammad Asri. (2013) [Student Project] (Unpublished)

Mamat, Fatihah (2013) Water resistance particleboard from weathered oil palm trunk / Fatihah Mamat. (2013) [Student Project] (Unpublished)

Masdan, Nor Shahira (2013) Relationship between customer’s preference and satisfaction on the material of making furniture in Temerloh town / Nor Shahira Masdan. (2013) [Student Project] (Unpublished)

Masod, Abdul Hadi (2013) Properties of oriented strand board made from banana pseudo stem (Musa acuminate colla (AA Group) cv. 'Lacatan') / Abdul Hadi Masod. (2013) [Student Project] (Unpublished)

Mat Jusoh, Suhaila Rafeah (2013) Effect of pentaerythritol abietate as tackifying agent in synthesis polyurethane from crude palm oil / Suhaila Rafeah Mat Jusoh. (2013) [Student Project] (Unpublished)

Md Ali Hanapiah, Mazulizam (2013) Finishing properties of nitrocellulose (nc) on mersawa wood by steam treatment / Mazulizam Md Ali Hanapiah. (2013) [Student Project] (Unpublished)

Mohamed, Mimi Suzaini (2013) Physical and strength properties of dendrocalamus asper (Buluh Betong) at different portion and sub-portion / Mimi Suzaini Mohamed. (2013) [Student Project] (Unpublished)

Mohamed Anwar, Ainil Idzaty (2013) Properties of particleboard from oil palm frond for exterior use / Ainil Idzaty Mohamed Anwar. (2013) [Student Project] (Unpublished)

Mohamed Ripin, Mohamed Azmi (2013) Comparison of anthropometric data of 18-25 age (IPT Students) with 18-25 age (NON Students) / Mohamed Azmi Mohamed Ripin. (2013) [Student Project] (Unpublished)

Mohamed Said, Md Azharulzaman (2013) Multipurpose cabinet using knockdown concept / Md Azharulzaman Mohamed Said. (2013) [Student Project] (Unpublished)

Mohd Amran, Siti Anis (2013) Determination of metals concentrations & water quality status along Ulu Jempul River / Siti Anis Mohd Amran. (2013) [Student Project] (Unpublished)

Mohd Nor, Mohd Khaidir (2013) Properties of finger jointing effect by adhersive types on three different species / Mohd Khaidir Mohd Nor. (2013) [Student Project] (Unpublished)

Mohd Zailani, Nur Farhana (2013) Dendrocalamus asper (Buluh Betong) as raw material to manufacture wood plastic composite (WPC) / Nur Farhana Mohd Zailani. (2013) [Student Project] (Unpublished)

Mohd Zawawi, Norakmalah (2013) Solar photocatalytic degradation of methylene blue(dye) based on TiO2 / Norakmalah Mohd Zawawi. (2013) [Student Project] (Unpublished)

Musa, Muhammad Faizal (2013) Fully jointed rack without the use of fasteners / Muhammad Faizal Musa. (2013) [Student Project] (Unpublished)

N

Najib, Nur Atiqah (2013) Strength properties of sandwich composite made from plywood as skins and corrugated paper board as core / Nur Atiqah Najib. (2013) [Student Project] (Unpublished)

Nordin, Nur Saidah (2013) Potential of leucaena leucocephala wood as a source of renewable energy / Nur Saidah Nordin. (2013) [Student Project] (Unpublished)

O

Omar, Ahmad Badrul Hisyam (2013) Properties of acacia mangium wood cement board in relation to particle size and wood cement ratio / Ahmad Badrul Hisyam Omar. (2013) [Student Project] (Unpublished)

Othman, Mohd Fadhli (2013) Bending strength properties of engineered slice lumber from OPT mixed with low density hardwood / Mohd Fadhli Othman. (2013) [Student Project] (Unpublished)

R

Ramli, Mohd Haniff (2013) Properties of particleboard from rubberwood and Raintree / Mohd Haniff Ramli. (2013) [Student Project] (Unpublished)

Razali, Nur Amalina (2013) Properties of particleboard from acacia species using different resin content and board density / Nur Amalina Razali. (2013) [Student Project] (Unpublished)

S

Sarif, Mohd Sufian (2013) Properties of particleboard from sentang and Kenaf core / Mohd Sufian Sarif. (2013) [Student Project] (Unpublished)

Sayed Idrus, Syed Muhammad Azlan (2013) Properties of particleboards made from rubberwood (hevea brasiliensis) and kenaf (hibiscus cannabinus l.) core / Syed Muhammad Azlan Sayed Idrus. (2013) [Student Project] (Unpublished)

Syed Jaya, Sharifah Nor Hafizai (2013) Determination of antioxidant activity in sugared and milked tea by using ferric reducing antioxidant power (frap) assay / Sharifah Nor Hafizai Syed Jaya. (2013) [Student Project] (Unpublished)

T

Talib, Zurina (2013) Properties on ceiling board of rice husk (Oryza sativa) / Zurina Talib. (2013) [Student Project] (Unpublished)

W

Wan Abdul Manaf, Wan Mohammad Farid (2013) Finishing properties of plywood using shellac / Wan Mohammad Farid Wan Abdul Manaf. (2013) [Student Project] (Unpublished)

Z

Zafakali, Juwairiah (2013) Properties of weathered oil palm trunk plastic composite in relationship to filler loading, particle size, filler loading and mapp addition/ Juwairiah Zafakali. (2013) [Student Project] (Unpublished)

Zainudin, Mohd Azri (2013) Properties of wood plastic composite from different oil palm trunk region / Mohd Azri Zainudin. (2013) [Student Project] (Unpublished)

Zolkapli, Mohd Shah Fitri (2013) Properties of particleboard from admixture Kenaf (hibiscus cannabinus l.) core and oil palm trunk (OPT) / Mohd Shah Fitri Zolkapli. (2013) [Student Project] (Unpublished)

Zulkifli, Asyraf Ikhmal (2013) Survey of musculoskeletal disorder (MSD) among people in Kota Setar / Asyraf Ikhmal Zulkifli. (2013) [Student Project] (Unpublished)

This list was generated on Sat Jul 19 03:41:29 2025 UTC.