Browse by Thesis Field of Study

Wan Osman, Wan Mohd Tajuddin (2005) The optimization of anti-symmetric laminate / Wan Mohd Tajuddin Wan Osman. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Amin, Mohd Yusof (2005) Mechanical properties of oil palm fruit bunch (OPFB) fiber composite / Mohd Yusof Mohd Amin. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Baharudin, Najmul Watan (2005) Absorption air conditioning system for home residential application / Najmul Watan Baharudin. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Hashim, Khairul Helmi (2005) Development of combustion chamber for solid biomass fuels / Khairul Helmi Hashim. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ibrahim, Alia (2005) Constant load effect on fracture of polymer concrete (PC) due to environment / Alia Ibrahim. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Md Ali, Mohd Badrul Hisyam (2005) Reinforcement bar measurement in structural concrete using ultrasonic method / Mohd Badrul Hisyam Md Ali. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Hassim, Mohd Fauzi (2005) Fluidized bed application for component cleaning / Mohd Fauzi Hassim. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abd Rahman, Za'akemal (2005) Measuring speed and direction using fiber optic technology / Za'akemal Abd Rahman. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ismail, Abdul Halim (2005) Die design for oil seperator plates used in Gen-2 campro engine / Abdul Halim Ismail. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Husin, Azmi (2005) Numerical investigation on mechanical behaviour of composite sandwich structure / Azmi Husin. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Amir, Izwan (2005) Mechanical properties of oil palm fruit bunch (OPFB) fiber composite / Izwan Amir. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ab Rahim, Adam Hod (2005) Automobile brake pad friction and wear test rig: design / Adam Hod Ab Rahim. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Awg. Noh, Mohd Lukman (2005) Study of failure phenomena on Proton Waja's door handle / Mohd Lukman Awg. Noh. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Rasli, Mohd Basri (2005) First ply failure analysis on symmetric laminate / Mohd Basri Rasli. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohamed, Normahazan (2005) Producer-gas from agriculture solid waste / Normahazan Mohamed. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Wan Yahya, Wan Mohd Khairi (2005) The ventilation performance of a solar-powered attic fan in Malaysian climate / Wan Mohd Khairi Wan Yahya. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Yahaya, Zulkifli (2005) The computational study on the aerodynamic characteristics of airfoils using fluent / Zulkifli Yahaya. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Jumiran, Nor Azri (2005) Effect of filling time on metallurgical properties of casting component / Nor Azri Jumiran. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Omar, Shafie (2005) Computational simulation of petrol behavior (SWIRL) inside combustion chamber during the intake-stroke using fluent / Shafie Omar. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mat Sah, Mohd Redzwan (2005) Reinforcement bar measurement in structural concrete using Ground Penetrating Radar method / Mohd Redzwan Mat Sah. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Dali, Rosmanizam (2005) Comparison of mechanical characteristics of oil palm fruit bunch fibre (EFB)-polypropylene (PP) composite with other composite compositions / Rosmanizam Mohd Dali. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Sibi, Mulyadi (2005) Application of solar energy in Malaysian buildings: daylight performance of light pipes / Mulyadi Sibi. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abd Rahim, Nurul Akmam (2005) Design and fabrication of testing equipment for the side view mirror switch / Nurul Akmam Abd Rahim. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mat Saed, Abdul Rahman (2005) Effect of different pressure on densification of sintered parts / Abdul Rahman Mat Saed. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Azali, Mohd Syaifullah (2005) Constant load effect on fracture of polymer concrete (PC) due to environment / Mohd Syaifullah Mohd Azali. (2005) Degree thesis, thesis, Universiti Teknologi Mara (UiTM).

Mahamad Basri, Mahamad Hisyam (2005) Experimental study of sloshing of liquid in a tank / Mahamad Hisyam Mahamad Basri. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ismail, Rasfan (2005) Design and fabrication of robotic system for intensive fish farm industries / Rasfan Ismail. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abdul Mutalif, Shilawaty (2005) Design and development of linear technology impact simulator test equipment / Shilawaty Abdul Mutalif. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Salleh, Mohd. Zulkifli (2005) Stress analysis of the piston due to heat transfer using finite element analysis (FEA) Software / Mohd. Zulkifli Salleh. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ibrahim, Abdul Aziz (2005) Development of conveyor for lab scale combustion chamber (palm shell feed analysis) / Abdul Aziz Ibrahim. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ismail, Irfah (2005) Computational simulation of heat transfer in a flow around a tube banks using fluent / Irfah Ismail. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Kamarudin, Mohd Faizal (2005) Establishment of hardware interfacing system / Mohd Faizal Kamarudin. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Jantan, Ahmad Fauzi (2005) Design and development of a model of electric-powered scrubber for household application / Ahmad Fauzi Jantan. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Kamarudin, Ahmad Fhattah Syaifuddin (2005) Computer aided learning for metrology students / Ahmad Fhattah Syaifuddin Kamarudin. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Omar, Mohd Nazri (2005) Sloshing of liquid in tank / Mohd Nazri Omar. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Sulaiman, Mohd Zohdi (2005) Computer aided learning for metrology students / Mohd Zohdi Sulaiman. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abbas, Muhammad Fatah @ Fadullah (2005) Characterization of optimal powder loading for metal injection moulding (MTM) / Muhammad Fatah @ Fadullah Abbas. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

On, Mohd Husni (2005) Development of interfacing program using LabVIEW software / Mohd Husni On. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mukhtar, Mohd Effandy (2005) Design a small wind tunnel studies for boundary layer experiment / Mohd Effandy Mukhtar. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Md. Isa, Mohd Muslim (2005) A study on the effects of sintering temperature on the densification of alumina / Mohd Muslim Md. Isa. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Omar, Harizal (2005) Estimation of sky illuminance for solar energy technology applications in Malaysia / Harizal Omar. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Harun, Hasnol (2005) Crack growth of fibre-reinforced plastic (FRP)/polymer mixed concrete (PMC) system (bonded by polyester resin) due to constant load/stress / Hasnol Harun. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Haron, Mohd Fairuz (2005) Development of a friction and wear testing machine; design / Mohd Fairuz Haron. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ramlee, Mohd Yusri (2005) Crack growth of fiber-reinforced plastic (FRP)/polymer mixed concrete (PMC) system (bonded by epoxy resin) due to constant load/stress / Mohd Yusri Ramlee. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ismail, Rosazman (2005) Heat flow characteristics through low-slope metal deck roofs / Rosazman Ismail. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Othman, Khairil Anuar (2005) Fabrication and experimental investigation on filament wound composite / Khairil Anuar Othman. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Jalil, Nor Hisammuddin (2005) Thrust measurement stand and data for water propulsion - rocket / Nor Hisammuddin Jalil. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mat Husin, Mohd Hairul (2005) Development of short span bridge (SSB) structures using indigenous agro-based material resources: design experimentation using FEA / Mohd Hairul Mat Husin. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Nashir, Sayuti (2005) Computational simulation of gasoline behavior (swirl) inside combustion chamber during intake-stroke using fluent / Sayuti Nashir. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Ripain, Mohd Nasarudin (2005) Trajectory planning and fabrication of UGV for hazardous applications / Mohd Nasarudin Mohd Ripain. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ab Razak, Mohd Yusof (2005) Stress and thermal analysis on the piston head using finite element analysis (FEA) / Mohd Yusof Ab Razak. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Omar, Mohd Noor (2005) Crack detection and characterization of polymer mixed concrete / Mohd Noor Omar. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mahmud, Mohd Nazhatul Hizan (2005) Die design for oil seperator plates used in gen-2 campro engine / Mohd Nazhatul Hizan Mahmud. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abdul Wahab, Aqil (2005) Effect of different pressure on densification of sintered parts / Aqil Abdul Wahab. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abu Bakar, Mohd Yusri (2005) Aerodynamic study on go-kart using computer aided tools / Mohd Yusri Abu Bakar. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Che Mat, Sharzali (2005) Fabrication and experimental investigation on filament wound composite / Sharzali Che Mat. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Shapie, Shazli Azrin (2005) Notched strength of fiber-reinforced polymer / Shazli Azrin Shapie. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ibrahim, Norlita (2005) On a study of polymeric-foam padding as a potential vibration absorbtion for uses in household appliance / Norlita Ibrahim. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Paharal Radzi, Rafhan (2005) The optimization of anti-symmetric laminate / Rafhan Paharal Radzi. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abdul Karim, Hafizah (2005) On a study of polymeric-foam padding as a potential vibration absorbtion for uses in household appliance / Hafizah Abdul Karim. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Jalaluddin, Sheikh Rizuan (2005) Development of water - rocket thrust measurement stand / Sheikh Rizuan Jalaluddin. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Zuhudi, Akramin (2005) Studying the influence of varying root opening of joint design on the weld strength / Akramin Mohd Zuhudi. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Motahar, Muhamad Kamarul Azman (2005) Combustion analysis of agriculture solid waste (palm fiber) / Muhamad Kamarul Azman Motahar. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Nordin, Mohamad Khairul (2005) Comparative study of inventory management and just-in-time tactics / Mohamad Khairul Nordin. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mesror, Ismail (2005) Automobile brake pad friction and wear test rig: Fabrication / Ismail Mesror. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

Kassim, Mohd Nasir (2005) Numerical investigation on mechanical behaviour of composite sandwich structure / Mohd Nasir Kassim. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Muda, Mohd. Adami (2005) Stress analysis of the piston due to pressure using finite element analysis (FEA) software / Mohd. Adami Muda. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abdul Halim, Mohd Afzan (2005) Investigation of the effectiveness of a light pipe in reducing temperature inside the occupied space in Malaysian climate / Mohd Afzan Abdul Halim. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Shuib, Shahril Firdaus (2005) Development of short span bridge (SSB) structures using indigenous agro-based material resources: design experimentation using FEA / Shahril Firdaus Shuib. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Sikh Omar, Muhammad Ridhwan (2005) Development of a friction and wear testing machine; fabrication / Muhammad Ridhwan Sikh Omar. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Asnawee, Mohd Hairul (2005) Stress and thermal analysis on the piston head using finite element analysis (FEA) / Mohd Hairul Asnawee. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Che Jawias, Hasanul Ariff (2005) A study of ceramic coating by plasma spray machine / Hasanul Ariff Che Jawias. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Tajudin, Mohd Tamrin (2005) A study on the impact of product variety in Malaysian automotive industry-current production / Mohd Tamrin Tajudin. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).