Browse by Thesis Field of Study

Muhamad Nordin, Muhamad Hazly (2004) Fabrication of Eddy Current Probe for SS 304 tube inspection / Muhamad Hazly Muhamad Nordin. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ibrahim, Mohd Faizal (2004) A case study of resistance system towards fisherman's boat in Kuala Selangor / Mohd Faizal Ibrahim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Ariff, Amir Shah (2004) Fabrication of filament winding machine / Amir Shah Mohd Ariff. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ghazali, Mohamad Fahmi (2004) Rheological study of MIM water soluble binder system / Mohamad Fahmi Ghazali. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Suukhi, Ahmad Shakir (2004) Evaluation of design parameters for air cyclone system in palm oil mill / Ahmad Shakir Suukhi. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ibrahim, Hamedan (2004) The optimization of lamination scheme and ply thickness for laminated composite plates / Hamedan Ibrahim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Zawawi, Mohd Zaidi (2004) An overview of the CIM implementation / Mohd Zaidi Zawawi. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Yusoff, Adnan (2004) The waste oil burner / Adnan Yusoff. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Awang@Abdulah, Rashdan (2004) Cold room design / Rashdan Awang@Abdulah. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Haron, Nor Hazila (2004) Automobile air-conditioning using solar energy / Nor Hazila Haron. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Ariff, Azizulfaizei (2004) Evaluation of R-12 performance in car air conditioning / Azizulfaizei Mohd Ariff. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mat Ghani, Ikhairul Hamin (2004) Slow crack growth of polymer mixed concrete under constant load / Ikhairul Hamin Mat Ghani. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Md. Tahir, Nur Azureen (2004) Develop a remote control aircraft for crop spraying / Nur Azureen Md. Tahir. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abdullah, Mohd. Alias (2004) Analysis of the exhaust emission on the variable spark strength with stoichiometric air - fuel ratio / Mohd. Alias Abdullah. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abait, Siti Fatimah (2004) A study on low blow impact and residual strength of glass/epoxy and polypropylene (PP) polymer composites / Siti Fatimah Abait. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Samsuri, Muliaty (2004) Rheological study of MIM water soluble binder system / Muliaty Samsuri. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Ali, Hanafiah and Ebrahim, Mohamad Riza (2004) A study of the effects of carburizing on fatigue characteristics of a cannon barrel / Hanafiah Mohd Ali and Mohamad Riza Ebrahim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abdul Latiff, Ahmad Zuwairi (2004) Mode of failure analysis of fiber reinforced composite plate / Ahmad Zuwairi Abdul Latiff. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Sallehuddin, Mohd Nur Affendi (2004) Regulated combustion chamber as a thrust initiator / Mohd Nur Affendi Sallehuddin. (2004) Degree thesis, thesis, Universiti Teknologi Mara (UiTM).

Rashidin, Rashita (2004) Automobile air-conditioning using solar energy / Rashita Rashidin. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ab Ghani, Syairul Izam and Saleh, Mohd Shuhidan (2004) Robotics technology in car seat polyurethane injection process for small and medium size industries in Malaysia / Syairul Izam Ab Ghani and Mohd Shuhidan Saleh. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Ghani, Mohd Hezri and Yusof, Hamidi (2004) Micro Aerial Vehicle / Mohd Hezri Mohd Ghani and Hamidi Yusof. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Sadarudin, Noor Edzwan Hishamuddin (2004) Regulated combustion chamber as a thrust initiator / Noor Edzwan Hishamuddin Sadarudin. (2004) Degree thesis, thesis, Universiti Teknologi Mara (UiTM).

Elias, Mohd Aswadi (2004) A study on the effects of compositions on the mechanical properties of polymer mixed concrete / Mohd Aswadi Elias. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ahmad Takrim, Ahmad Reduean (2004) Develop a remote controlled aircraft for high tension cable inspection / Ahmad Reduean Ahmad Takrim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Solihin, Zainoor Hailmee and Ahmad, Mohd Fadzrul (2004) Production improvement through work study techniques / Zainoor Hailmee Solihin and Mohd Fadzrul Ahmad. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohamed, Nor Hisham (2004) Measuring wind speed and direction using fiber optic technology / Nor Hisham Mohamed. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Hashim, Hamirul Adli (2004) Thrust test stand for pulse jet engine / Hamirul Adli Hashim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Edaris, Mohd Zuhairi (2004) A study on the effects of compositions on the mechanical properties of polymer mixed concrete / Mohd Zuhairi Edaris. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Hussin, Noor Shuhada (2004) Develop a remote control aircraft for crop spraying / Noor Shuhada Hussin. (2004) Degree thesis, thesis, Universiti Teknologi MARA.

Haroni, Norzarina (2004) Slow crack growth of polymer mixed concrete under constant load / Norzarina Haroni. (2004) Degree thesis, thesis, Universiti Teknologi MARA.

Jamailudin, Mohd Sani and Hasshim, Mohamed Azwa (2004) Analysis of thermo-mechanical behavior for ceramic powder during cold and warm compaction processes / Mohd Sani Jamailudin and Mohamed Azwa Hasshim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Momsarip, M. Mahatir (2004) A case study of resistance system towards fisherman's boat in Kuala Selangor / M. Mahatir Momsarip. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Shaite, Mohd Shairizal (2004) Pulse jet engine / Mohd Shairizal Mohd Shaite. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ahmad, Adzrin (2004) Measuring wind speed and direction using fiber optic technology / Adzrin Ahmad. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Hazali, Mohd Hairie (2004) Pulse jet engine / Mohd Hairie Hazali. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Khalid, Khirman (2004) Study of pore structure evolution during debinding process / Khirman Khalid. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Abbas, Norliana (2004) Work study in manufacturing with validation using quest simulation / Norliana Mohd Abbas. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Tamjehi, Hasnal (2004) Mode of failure analysis of fiber reinforced composite plate / Hasnal Tamjehi. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Muhammad, Zaharuddin (2004) The effect of fiber orientation on progressive failure of composite plates / Zaharuddin Muhammad. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Alias, Normaslina (2004) Work study in manufacturing with validation using Quest Simulation / Normaslina Alias. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ibrahim, Izmir Zikry (2004) Develop a remote controlled aircraft for high tension cable inspection / Izmir Zikry Ibrahim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Khalid, Muhamad Rizal (2004) Effect of flow rate on development of microstructure by MIG welding / Muhamad Rizal Khalid. (2004) Degree thesis, thesis, Universiti Teknologi MARA.

Muda, Ahmad Zubaidi (2004) Design and fabrication of activated carbon based of natural gas vehicle container / Ahmad Zubaidi Muda. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Omar, Razif (2004) Development of an automatic whiteboard eraser / Razif Omar. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Razali, Mohd Khazairudin Azwadi (2004) Determination of mechanical behavior of shot peened valves / Mohd Khazairudin Azwadi Razali. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ibrahim, Muhammad Aizuddin (2004) Cleaning automotive part using fluidized bed reactor / Muhammad Aizuddin Ibrahim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Haron, Abrar (2004) Evaluation of design parameters for air cyclone system in palm oil mill / Abrar Haron. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Pusin, Denni (2004) Pulse jet engine / Denni Pusin. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Salleh, Saliza (2004) Evaluation of design parameters for air cyclone system in palm oil mill / Saliza Salleh. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abdul Malek, Fairus Dora (2004) Fabrication of Eddy Current Probe for SS 304 tube inspection / Fairus Dora Abdul Malek. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Sarbani, Nor Azwan (2004) Thrust test stand for pulse jet engine / Nor Azwan Sarbani. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abdul Wahab, Mohammad Fathur Razi (2004) Tester mechine for torsion bar sample / Mohammad Fathur Razi Abdul Wahab. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Yusof, Mohd Khuzairy (2004) Sintering study in metal injection molding (MIM) process / Mohd Khuzairy Mohd Yusof. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mazlan, Mohd Fadzli (2004) Fabrication of filament winding machine / Mohd Fadzli Mazlan. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).