Items where Subject is "Miscellaneous motors and engines.Including gas, gasoline, diesel engines"

Article

A Rane, Santosh and Kalamkar, Vilas (2010) Analysis of overhead valve push rod type valve train for off road diesel engine / Santosh A. Rane and Vilas Kalamkar. (2010) Journal of Mechanical Engineering (JMechE), 7 (1). pp. 65-79. ISSN 1823-5514 ; 2550-164X

Gugulothu, Santhosh Kumar and Panda, Jibitesh Kumar and Sastry, G.R.K. and Mishra, Sruti Ranjan (2021) A multi-objective optimization of output parameters of a single cylinder diesel engine running methyl esters and different additives: taguchi-fuzzy based approach / Santhosh Kumar Gugulothu … [et al.]. (2021) Journal of Mechanical Engineering (JMechE), 8 (1). pp. 53-72. ISSN (eISSN): 2550-164X

Hokyoo, Lee and Ab Patar, Mohd Nor Azmi and Takashi, Komeda and Mahmud, Jamaluddin and Yoshiyuki, Takahashi (2018) Evaluation of four-wheel vehicle driven by lower limb with electric pedalling assistance for elderly people / Hokyoo Lee ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 29-43. ISSN 18235514

Ibrahim, Idris and Abdul Jalil, Adibah and A. Sulaiman, Shaharin (2010) The effect of EFI to the carbureted single cylinder four stroke engine / Idris Ibrahim, Adibah Abdul Jalil and Shaharin A. Sulaiman. (2010) Journal of Mechanical Engineering (JMechE), 7 (2). pp. 53-64. ISSN 1823-5514 ; 2550-164X

Jayson, Desmond and Mat Taib, Norhidayah and Abu Mansor, Mohd Radzi and Mohamad, Taib Iskandar and Ilham, Zul (2018) Performance analysis of a direct injection diesel engine using Biodiesel and additives / Desmond Jayson ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 67-80. ISSN 18235514

Karthikeyan, R. and Nallusamy, N. and Alagumoorthi, N. and Ilangovan, V. (2011) Experimental investigation on the engine performance and emission behaviour of turpentine - diesel dual fuel operated modified DI diesel engine / R. Karthikeyan … [et al.]. (2011) Journal of Mechanical Engineering (JMechE), 8 (1). pp. 25-40. ISSN 1823-5514 ; 2550-164X

Mat Taib, Norhidayah and Abu Mansor, Mohd Radzi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Nik Rosli (2018) Simulation of injection development of diesel-ethanol-palm oil methyl ester blend in direct injection diesel engine / Norhidayah Mat Taib ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 81-93. ISSN 18235514

Mohd Alias, Mohd Shahrudin and Saad, Nor Hayati and Saedon, Juri and Hassan, Nor Hidayahti and Harun, Saidi (2015) Analysis on the factors and effects of engine tapping noise by Design of Experiment (DOE) / Mohd Shahrudin Mohd Alias … [et al.]. (2015) Journal of Mechanical Engineering (JMechE), 12 (2). pp. 28-47. ISSN 1823-5514 ; 2550-164X

Mohd Ariff, Mohd Azahar and Mahamad Basri, Mahamad Hisyam and Che Mat, Sharzali (2013) Development of fuel additives to enhance the performances of four-cylinder spark-ignition engine / Mohd Khaizalfitri Mhd Yaakob, Mohd Azahar Mohd Ariff, Mahamad Hisyam Mahamad Basri, Sharzali Che Mat and Azmi Husin. (2013) Esteem Academic Journal, 9 (1). pp. 48-55. ISSN 1675-7939

Tholibon, Dulina and Sulong, Abu Bakar and Muhamad, Norhamidi and Ismail, Nur Farhani (2017) Optimization of Hot Pressing Process for Unidirectional Kenaf Polypropylene Composites by Full Factorial Design / Dulina Tholibon...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 23-35. ISSN 18235514

Venkataraman, Mohanapriya and Militký, Jiří and Mishra, Rajesh and Jandová, Soňa (2018) Unconventional measurement methods and simulation of aerogel assisted thermoregulation / Mohanapriya Venkataraman ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 62-96. ISSN 18235514

Book Section

Mohd Zamzam, Muhammad Fikri and Adnan, Abdul Azim and Ismadi, Nur Hafizah and Asraf, Nurizzatie Syazwani and Zainuddin, Syamimi (2014) Tyre rescue kit / Muhammad Fikri Mohd Zamzam … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 83.

Conference or Workshop Item

Abd Aziz, Muhammad Idham and Zainuddin, Muhammad Huzairi and Mohamed Sukor, Nur Maizatul Ashikin and Mohd Zain, Mazratul Firdaus (2018) Automatic whiteboard cleaner/ Muhammad Idham Abd Aziz ...[et al.]. (2018) In: Electrical Engineering Innovation Competition & Exhibition (EEICE) 2018, 13-14 November 2018, Dewan Aspirasi, UiTM Cawangan Terengganu.

Ruslan, Muhammad Hifzhan and Maznan, Muhammad Ammar Irfan and Mohd Yasir Afkam, Yusri Aizat (2018) Smart grass cutter/ Muhammad Hifzhan Ruslan, Muhammad Ammar Maznan and Yusri Aizat Mohd Yasir Afkam. (2018) In: Electrical Engineering Innovation Competition & Exhibition (EEICE) 2018, 13-14 November 2018, Dewan Aspirasi, UiTM Cawangan Terengganu.

Thesis

Abdullah, Muhammad Fikry (2009) Analysis of transient response in induction motor / Muhammad Fikry Abdullah. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ahmad, Abdul Hakim (2010) A study of tribological aspects in gearbox of CNG engine / Abdul Hakim Ahmad. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Ahmad, Abu Zaharin (2006) New intelligent in-series DC motor controller / Abu Zaharin Ahmad. (2006) Masters thesis, thesis, Universiti Teknologi MARA.

Mansor, Khairul Syazwan (2010) Performance analysis of open cathode air-cooled fuel cell using HY-EXPERT instructor fuel cell system / Khairul Syazwan Mansor. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Mazlan, Mohd Fadzli (2004) Fabrication of filament winding machine / Mohd Fadzli Mazlan. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohammed Salleh, Ahmad Safri (2005) Effect of gas flow rate during Metal Inert Gas (MIG) welding on tensile strength / Ahmad Safri Mohammed Salleh. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

Mohd Yusof, Ahmad Fazilah (2010) Emission products analysis on 2 stroke internal combustion engine single powered by hydrogen gas / Ahmad Fazilah Mohd Yusof. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Mokhtar, Nurul Natasya (2009) Effect of number of blades on the performance of drag-based Vertical Axis Wind Turbines (VAWTs) / Nurul Natasya Mokhtar. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Mustakim, Mohammad Afiq (2013) Microcontroller gas detection system / Mohammad Afiq Mustakim. (2013) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Nashir, Sayuti (2005) Computational simulation of gasoline behavior (swirl) inside combustion chamber during intake-stroke using fluent / Sayuti Nashir. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Rashid, Helmi (2019) Motorcyclist muscle fatigue decision support tools in prolonged motorcycle riding / Helmi Rashid. (2019) PhD thesis, thesis, Universiti Teknologi MARA.

Student Project

Abd. Razak, Mohd Fauzi and Abdullah, Khairul Anwar (2001) Testing on power plus device for fuel consumption and exhaust emission / Mohd Fauzi Abd. Razak and Khairul Anwar Abdullah. (2001) [Student Project] (Unpublished)

Abdul Latiff, Ahmad Zuwairi and Mohd Zain, Badrul Syah and Mat Isa, Mohd Azrulnizam and Hassan, Muhamad Fauzi (2001) Automotive breaker triggered coil ignition system / Ahmad Zuwairi Abdul Latiff … [et al.]. (2001) [Student Project] (Unpublished)

Abu Bakar, Amir Farhan (2022) Effect of oxidation in engine oil lubricant on mercury outboard engine performance / Amir Farhan Abu Bakar. (2022) [Student Project] (Submitted)

Ashari, Mohammad Marzuki (2008) Optimization of injection moulding parameters using Cadmould simulation software for Cover Fog Lamp / Mohammad Marzuki Ashari. (2008) [Student Project] (Unpublished)

Basseri, Muhammad Imran (2017) A GUI-based numerical flow solver using the MacCormack’s scheme for Prandtl-Meyer expansion wave / Muhammad Imran Basseri. (2017) [Student Project] (Unpublished)

Drahman, Royhaila and Muti, Nazifah and Jahaya, Zaiton (1990) Product development using CNC lathe machine / Royhaila Drahman, Nazifah Muti and Zaiton Jahaya. (1990) [Student Project] (Unpublished)

Draman, Mahadi (2001) Demonstration of automatic gearbox II / Mahadi Draman. (2001) [Student Project] (Unpublished)

Fauzi, Mohamad Ikram (2022) Effect of oxidation in engine oil lubricant on Yamaha outboard engine performance / Mohamad Ikram Fauzi. (2022) [Student Project] (Submitted)

Ijar, Mohamad Fauzi and Husin, Fazly Husaime and Ismail, Khairul Hidayat and Ali, Suhirman (2001) The comparison of ECVT and proton automatic gear box / Mohamad Fauzi Ijar … [et al.]. (2001) [Student Project] (Unpublished)

Ismail, Ali and Jeffrey, Dewa (1986) Penyelidikan tentang ciri-ciri penggunaan bahanapi bagi pemotong rumput jenis galas / Ali Ismail dan Dewa Jeffrey. (1986) [Student Project] (Unpublished)

Ismail, Muhammad Haziq Hilmy (2022) Effect of moisture contamination in gear oil lubricant on Yamaha outboard engine performance / Muhammad Haziq Hilmy Ismail. (2022) [Student Project] (Unpublished)

Kamari, Sulaiman and Mohamad, Wan Shukri (1997) New material for ducting in air-conditioning system / Sulaiman Kamari and Wan Shukri Mohamad. (1997) [Student Project] (Unpublished)

Mahamad Sahab, Abdul Rahim and Wan Ibrahim, Mohd. Kamel and Saad, Nor Hayati (1999) Development of a digital-propeller- anemometer / Abdul Rahim Mahamad Sahab, Mohd. Kamel Wan Ibrahim and Nor Hayati Saad. (1999) [Student Project] (Unpublished)

Mazlan, Mohd Johanes and Che Pa, Zarul Fauzy and Khalid, Khirman (2001) Fuel injection system: studies and comparison of Proton, Japanese and continental cars / Mohd Johanes Mazlan, Zarul Fauzy Che Pa and Khirman Khalid. (2001) [Student Project] (Unpublished)

Mesror, Ismail and Manan, Fauzan and Ahmad, Nasrul Rahman (2002) The study about gasoline direct injection / Ismail Mesror, Fauzan Manan and Nasrul Rahman Ahmad. (2002) [Student Project] (Unpublished)

Mohamad Jamari, Effandi and Kandar, Mohamad Shahruddin (2001) Test engine bed TD-10 upgrading for radical combustion testing / Effandi Mohamad Jamari and Mohamad Shahruddin Kandar. (2001) [Student Project] (Unpublished)

Mohd Dakir, Mohd Nazari and Mokhtar, Mohd Nazrol and Abdul Latib, Ahmad Zaki (2001) Semi automatic transmission using motor wiper / Mohd Nazari Mohd Dakir, Mohd Nazrol Mokhtar and Ahmad Zaki Abdul Latib. (2001) [Student Project] (Unpublished)

Mohd Hasmi, Muhamad Fahim (2022) Thermal analysis on outer surface of turbo for zero load gasoline engine / Muhamad Fahim Mohd Hasmi. (2022) [Student Project] (Unpublished)

Mohd Sabri, Abdul Azim (2022) Development and kinematic analysis of Scotch Yoke Mechanism / Abdul Azim Mohd Sabri. (2022) [Student Project] (Submitted)

Mojuli, Peter Gerald and Abdol Rahman, Mohammad Hazrin and Zulkapli, Zulhairizam (2002) The effects of spring to the suspension system / Peter Gerald Mojuli, Mohammad Hazrin Abdol Rahman and Zulhairizam Zulkapli. (2002) [Student Project] (Unpublished)

Muhamad Fuzi, Abdul Habib and Abu Bakar, Ahmad Najib (2000) To investigate and diagnose the engine problems and used it as a study purpose / Abdul Habib Muhamad Fuzi and Ahmad Najib Abu Bakar. (2000) [Student Project] (Unpublished)

Omar, Zarina and Mohd Yazan, Maimunatun Nawar and Mod Zahari, Iffat Asymawie and Ahmad Shakri, Nurul Izzah and Abd Razak, Nur Diana (2021) Study on the hydrogen storage properties of NaAlH4 composites using taguchi method / Zarina Omar. (2021) [Student Project] (Unpublished)

Osmin, Muhamad Shah and Hashim, Muhammad Fahmi and Abd. Kadir, Mohd Zulharis and Abu Hassan, Mohamed Heszzuddin (2001) Fuel injection system / Muhamad Shah Osmin ... [et al.]. (2001) [Student Project] (Unpublished)

Samuri, Sariman (1985) Study the performance of the four-stroke, four-cylinder petrol engine in the thermodynamic laboratory / Sariman Samuri. (1985) [Student Project] (Unpublished)

Sharif, Shahrizal and Sulaiman, Fakrol Hisham and Solaiman, Helly Suhailla and Mat Yusuf, Lili Munira (1997) Turbo research & installation / Shahrizal Sharif … [et al.]. (1997) [Student Project] (Unpublished)

Tukimin, Muhammad Ridzuwan and Zakaria, Zaidi Hafizi and Mahmood, Nazli (2011) Wear analysis of piston ring / Muhammad Ridzuwan Tukimin, Zaidi Hafizi Zakaria and Nazli Mahmood. (2011) [Student Project] (Unpublished)

Yahya, Nurul Ain Nabila (2022) Thermal analysis on outer surface of turbo for zero load on gasoline engine / Nurul Ain Nabila Yahya. (2022) [Student Project] (Submitted)

Zaidi, Ahmad Asyraf (2022) Design and simulation 360° rotating vehicle / Ahmad Asyraf Bin Zaidi. (2022) [Student Project] (Submitted)