Items where Subject is "Inorganic polymers"

Article

Adsorption of zinc from waste water using Bladderwort (Utricularia vulgaris) / Salina Alias, Caroline Marajan and Mohamad Azrul Jemain. (2009) ESTEEM Academic Journal, 5 (1). pp. 25-36. ISSN 1675-7939

Investigation of Renewable Polymer Composite from Waste Oil Endurance to UV Irradiation Exposure by using FTIR and UV-Vis / Nik Normunira Mat Hassan ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 53-61. ISSN 18235514

Moisture Adsorption Isotherm Model for Edible Food Film Packaging – A Review / Aqila Zulaikha Nazreen …[et al.]. (2020) Scientific Research Journal, 17 (2). pp. 222-245. ISSN 2289-649X

Effect of nanosilica injection to oil recovery factor in low porosity and permeability reservoir / Mursyidah Umar ...[et al.]. (2016) Jurnal Intelek, 9 (2). pp. 11-13. ISSN 2682-9223

Conductivity Studies on K-Carrageenan-Methyl Cellulose Blend as Bio-Polymer Electrolyte / Rosnah Zakaria and Ab Malik Marwan Ali. (2020) Scientific Research Journal, 17 (2). pp. 120-128. ISSN 2289-649X.

Thesis

The effect of various titanium dioxide [TiO2] loading on polymorphism of stretched polyvinylidene flouride [PVDF] /TiO2 thin film / Zulkhairul Akmal Abdul Basir. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

A study on the effect of microwave radiation exposure time on the properties of devulcanized EPDM waste / Norhidayah Ahmad Jalini. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Effect of glut palmitate salt as coupling agent on thermal and mechanical properties of polyvinyl alcohol (PVA) and oil palm empty fruit bunch (OPEFB) / Mohd Zaki Azizan. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Effect of egg shell powder (ESP) on cure characteristic, physical and mechanical properties of acrylonitrile rubber (NBR) composites / Noorakma Syareena Dahalan. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Evaluation of the tensile properties for polypropylene composite – a finite element and mechanic studies / Husnani Hamid. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Electrical, mechanical and adhesion properties of silicone electrical conductive adhesives [ECAs] filled carbon black at elevated temperature / Nurul Hazirah Hasnol. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Adhesion and corossion properties of polyester filled calcium gluconite via immersion in salt solution as primer coatings application / Siti Najwa Mohamad Rasol. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Self healing polyester-graphene primer coating via microcapsule on its mechanical, adhesion and corossion properties / Siti Adlina Syahira Mohd Khamsi. (2020) Degree thesis, thesis, Universiti Teknologi MARA Perlis.

Effect of coconut shell powder [CSP] on cure characteristics, physical and mechanical properties of nitrile rubber [NBR] composites / Nurliyana Mohd Sharif. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

The compatibility of rice husk ash (RHA) and sewage sludge ash (SSA) as source materials in producing geopolymer mortar / Zaidahtulakmal Mohd Zahib. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Electrical and physical studies of polymer electrolyte based on methylgrafted natural rubber (MG30) / Nur Hamizah Mohd Zaki. (2014) Masters thesis, thesis, Universiti Teknologi MARA.

A review on the thermal liquefaction process of polystyrene [PS] waste in bio-fuels productions / Amiratul Hanim Mohd Zamri. (2022) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Effect of hybrid natural fibre pineapple leaf fiber (PLAF) / carbon black fillers in styrene butadine rubber (SBR) composites on cure, physical and mechanical properties / Nabila Abu Osman. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Mechanical, adhesion and corrosive properties of unsaturated polyester-graphene coating treated with silane coupling agent on metal substrate / Siti Nur Farysa Sh Samsudin. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Modelling of an arranged-microstructure interaction at short crack tip / Nur Azlinda Shahidan. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Exploiting high-speed air bag models to quantify reliability in non-destructive evaluation / Muhammad Nur Aiman Suhaimi. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Preparation and characterization of UV-irradiated PMMA/ENR 50 blends electrolytes / Wan Faizah Wan Abd Ghapar. (2011) Masters thesis, thesis, Universiti Teknologi MARA.

Synthesis and characterization of waste cooking oil-based polyurethane solid polymer electrolyte for DSSC application / Wan Norfirdaus Wan Salleh. (2019) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Mechanical and physical properties of unsaturated polyester resins modified with devulcanized ethylene polypropylene diene monomer waste / Nur Laili Yeop Idris. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Student Project

Buffer capacity effect of meranti pa'ang (shorea bracteolata) and sesenduk (endospermum diadenum) on the reactivity of urea formaldehyde and phenol formaldehyde adhesive / Muhammad Zakwan Amat Sa'aidi. (2015) [Student Project] (Unpublished)

Preparation of commercial polyaniline composites for ammonia detection / Muhammad Musa Jusoff Albar. (2019) [Student Project] (Unpublished)

Determination of plastic pollution and its degradation in soil at pineapple cultivation area, okra plantation area, palm oil plantation area and chilli fertigation area / Khaleeda Nora Asyakira Kamarudzaman. (2023) [Student Project] (Submitted)

Determination of physochemical properties of soil before and after agricultural activities at AMBS Durian Mas / Nur Syafikah Atirah Khalid. (2023) [Student Project] (Submitted)

Fourier transform infrared spectroscopy (FTIR) of modified natural rubber electrolyte containing sodium hydroxide / Adam Aidid Mohamad Suhaili ...[et al.]. (2018) [Student Project] (Unpublished)

Conductivity studies of PEO- LiBF4- EC polymer electrolytes / Mohamad Hanif Mohamad Taib. (2008) [Student Project] (Unpublished)

Preparation of hydrogel from propolis extract / Siti Sarah Mohd Salleh. (2023) [Student Project] (Submitted)

Determination of physochemical properties of soil before and after agricultural activities / Azam Saqeef Norazmi. (2023) [Student Project] (Submitted)

Synthesis and characterization of polyaniline/mussel shell composites / Norhidayah Ramli. (2019) [Student Project] (Unpublished)

Research Reports

Synthesis and properties of eco-friendly novolac phenolic resin from liquefied coir husk / Nor Mazlina Abdul Wahab … [et al.]. (2016) [Research Reports] (Unpublished)

Photocatalytic activity of low – density polyethylene [LDPE] under visible light using zinc oxcide [ZnO] and titanium dioxide [TiO2] as photocatalyst / Hazirah Haron. (2022) [Research Reports] (Submitted)

The effects of secondary filler on the impact behaviour of hybrid polymer composites / Anizah Kalam. (2012) [Research Reports] (Unpublished)