Browse by Types of Document

Number of items: 113.

Effects of Zn addition on the intermetallic formation and joint strength of Sn-3.5Ag-1.0Cu solders / Ramani Mayappan and Iziana Yahya. (2025) Scientific Research Journal, 22 (1): 1. pp. 1-17. ISSN 1675-7009

Performance of spent iron-based catalyst in the photo assisted electrochemical system for the removal of methylene blue (MB) dye / Nurul Athikah Azizan ... [et al.]. (2025) Scientific Research Journal, 22 (1): 2. pp. 19-37. ISSN 1675-7009

Spatial distribution of microplastics abundance along selected beaches in Kelantan, Malaysia / Muhammad Zakwan Anas Abd Wahid ... [et al.]. (2025) Scientific Research Journal, 22 (1): 3. pp. 39-66. ISSN 1675-7009

Characterization, physicomechanical and corrosion properties of reinforced microcrystalline cellulose treated silane unsaturated polyester primer coatings / Adzrie Baharudin ... [et al.]. (2025) Scientific Research Journal, 22 (1): 4. pp. 67-81. ISSN 1675-7009 (In Press)

Antioxidant potential of curcuma xanthorrhiza -based serum stick / Mumtazatul Mahfuzah Mahadzir, Nor Azira Irma Muhammad and Nur Afiqah Yusri. (2025) Scientific Research Journal, 22 (1): 5. pp. 83-100. ISSN 1675-7009

Properties of magnesium-zinc graphene composites / Nur Maizatul Shima Adzali ... [et al.]. (2025) Scientific Research Journal, 22 (1): 6. pp. 101-124. ISSN 1675-7009

Recent Malaysian food waste generation trends, enacted policies and challenges in food waste management / Hasyireen Abdul Halim, Nursahizalina Mohd Sa’at and Rozieana Abu. (2025) Scientific Research Journal, 22 (1): 7. pp. 125-146. ISSN 1675-7009

Effect of impregnation temperature on monoethanolamine-kenaf biosorbent for CO2 adsorption from gas mixture / Norsuhadat Nordin ... [et al.]. (2025) Scientific Research Journal, 22 (1): 8. pp. 147-166. ISSN 1675-7009

Tensile and thermal properties of natural rubber/ ethylene propylene rubber waste/linear low-density polyethylene blends / Nor Mazlina Abdul Wahab ... [et al.]. (2025) Scientific Research Journal, 22 (1): 9. pp. 167-178. ISSN 1675-7009

Elucidating the effects of stirring time on chemical and electrochemical properties of polyaniline salt dispersion in tetrahydrofuran / Helyati Abu Hassan Shaari ... [et al.]. (2025) Scientific Research Journal, 22 (1): 10. pp. 179-191. ISSN 1675-7009

Development of serum stick from medusomyces gisevii (kombucha) to restore facial skin assets / Nur Afiqah Yusri, Nor Azira Irma Muhammad and Mumtazatul Mahfuzah Mahadzir. (2025) Scientific Research Journal, 22 (1): 11. pp. 193-221. ISSN 1675-7009

Elucidation study of bioavailable potential among plant-based silver nanoparticles fabricated from several local fruit peels / Zainab Razali ... [et al.]. (2025) Scientific Research Journal, 22 (1): 12. pp. 223-241. ISSN 1675-7009

Preparation and characterization of pectin-starch hydrogel modified with urea and lactic acid-based deep eutectic solvent for soil water retention / Amira Mohd Yusoff ... [et al.]. (2025) Scientific Research Journal, 22 (1): 13. pp. 243-265. ISSN 1675-7009

Breaking barriers and building bridges: the influence of ethics in advancing medical practice / Mark Kiak Min Tan ... [et al.]. (2025) Journal of Clinical and Health Sciences (JCHS), 10 (1). pp. 1-5. ISSN 0127-984X

Pathogenesis and pathophysiological mechanism of obstructive sleep apnea: a review of anatomical, cytoskeletal, muscular, and neurological abnormalities / Siti Nuraidatul Amira. (2025) Journal of Clinical and Health Sciences (JCHS), 10 (1). pp. 6-13. ISSN 0127-984X

A cross-sectional study on pain prevalence, management and interference among university students in a Malaysian public university / Nurin Jazlina Mohd Jamsari, Yow Hui Yin and Kayatri Govindaraju. (2025) Journal of Clinical and Health Sciences (JCHS), 10 (1). pp. 14-28. ISSN 0127-984X

Clinical profiles of cancer-associated thrombosis among newly diagnosed patient with solid cancer / Faiza Naimat ... [et al.]. (2025) Journal of Clinical and Health Sciences (JCHS), 10 (1). pp. 29-38. ISSN 0127-984X

The survey of clinical fundal height assessment among the obstetric practitioners / Nadzratulaiman Wan Nordin ... [et al.]. (2025) Journal of Clinical and Health Sciences (JCHS), 10 (1). pp. 39-48. ISSN 0127-984X

Efficacy of prophylactic dexamethasone on postoperative nausea and vomiting in laparoscopic appendicectomy: a randomized controlled trial / Ng Shin Ann ... [et al.]. (2025) Journal of Clinical and Health Sciences (JCHS), 10 (1). pp. 49-57. ISSN 0127-984X

Evaluation of antinuclear antibodies of SLE panel in COVID-19 patients: a cross-sectional study in a tertiary care hospital / K Usha Krishnan ... [et al.]. (2025) Journal of Clinical and Health Sciences (JCHS), 10 (1). pp. 58-65. ISSN 0127-984X

Dystrophia myotonica with hypercapnic respiratory failure – local challenges and ethical dilemmas / Muhammad Amin Ibrahim ... [et al.]. (2025) Journal of Clinical and Health Sciences (JCHS), 10 (1). pp. 66-71. ISSN 0127-984X

Plunging ranula causing airway compromise in a child: a rare case / Farhana Kamaruzaman ... [et al.]. (2025) Journal of Clinical and Health Sciences (JCHS), 10 (1). pp. 72-76. ISSN 0127-984X

Fibromatosis colli, a forgotten entity / Muhammad Raziin Zainal Abidin ... [et al.]. (2025) Journal of Clinical and Health Sciences (JCHS), 10 (1). pp. 77-81. ISSN 0127-984X

Retroperitoneal ewing sarcoma among Asian patients: a case report and review of literature / Amir Al-Amin Mustaff ... [et al.]. (2025) Journal of Clinical and Health Sciences (JCHS), 10 (1). pp. 82-87. ISSN 0127-984X

Optimization of acid orange II degradation using Fe3-xMnxO4-MKSF catalyst in heterogeneous fenton-like reaction via response surface methodology / Amirah Annasuha Azmi … [et al.]. (2025) ESTEEM Academic Journal, 21. pp. 9-12. ISSN 2289-4934

Transesterification of cooking palm oil via Mn-Al mixed oxides catalysts: effects of metal ratio / Siti Athirah Ramli … [et al.]. (2025) ESTEEM Academic Journal, 21. pp. 1-8. ISSN 2289-4934

Development of regression models for predicting water quality index based on dissolved oxygen for river pollution assessment / Wan Mohamad Haziq Wan Roselan … [et al.]. (2025) ESTEEM Academic Journal, 21. pp. 21-30. ISSN 2289-4934

Prevention of browning during the saccharification of juicy peach syrup and storage of peach wine / Yuxin Liu … [et al.]. (2025) ESTEEM Academic Journal, 21. pp. 31-40. ISSN 2289-4934

The role of xerogel in immobilising carbon quantum dots derived from oil palm mesocarp fibre: a potential adsorbent for CO2 capture / Aimi Solihah Zaul Kapri and Norhusna Mohamad Nor. (2025) ESTEEM Academic Journal, 21. pp. 41-58. ISSN 2289-4934

Influence of iron doping on the morphological and compositional properties of zirconia foil as photocatalyst / Nor Aimi Abdul Wahab … [et al.]. (2025) ESTEEM Academic Journal, 21. pp. 59-73. ISSN 2289-4934

IoT-Based intelligent system for headwater phenomenon detection and alerts using ESP32 / Rozan Boudville … [et al]. (2025) ESTEEM Academic Journal, 21. pp. 74-90. ISSN 2289-4934

Assessing rainfall trends and variability in a climate change / Muhammad Fahmi Muhammad Iskandar … [et al]. (2025) ESTEEM Academic Journal, 21. pp. 91-105. ISSN 2289-4934

New approach to minimise surface roughness in Polytetrafluoroethylene (PTFE) through robotic spindle speed control / Wan Nor Shela Ezwane Wan Jusoh … [et al.]. (2025) ESTEEM Academic Journal, 21. pp. 106-118. ISSN 2289-4934

Innovation and organization competitiveness: a study of Dangote Cement Plc., Nigeria / Itohan Iyobhebhe, Samuel Ayodele Majekodunmi and Johnson Iyiola Ogundele. (2025) Jurnal Intelek, 20 (1): 1. pp. 1-11. ISSN 2682-9223

Stress, self-regulation, and physical activity towards quality of life among senior year health science undergraduates / Arimi Fitri Mat Ludin ... [et al.]. (2025) Jurnal Intelek, 20 (1): 2. pp. 2-11. ISSN 2682-9223

Factors affecting academic administrators’ job involvement in Malaysian universities / Nor Suhana Ahmad, Nurita Juhdi and Rodrigue Ancelot Harvey Fontaine. (2025) Jurnal Intelek, 20 (1): 3. pp. 22-35. ISSN 2682-9223

Assessing the effectiveness of webinars in delivering knowledge of natural products and pharmapreneurship / Nurul Alyaa Ibrahim, Nur ‘Ainun Mokhtar and Siti Nur Fadzilah Muhsain. (2025) Jurnal Intelek, 20 (1): 4. pp. 35-45. ISSN 2682-9223

Evaluating the impact of agro-entrepreneurial activities in an academic health promotion program at a children’s activity centre in Kuala Muda / Siti Nur Fadzilah Muhsain ... [et al.]. (2025) Jurnal Intelek, 20 (1): 5. pp. 46-54. ISSN 2682-9223

Assessing employers’ perceptions towards internship students / Mas’udah Asmui ... [et al.]. (2025) Jurnal Intelek, 20 (1): 6. pp. 55-68. ISSN 2682-9223

Stress among university students: a case study of UiTM Johor / Fatin Farazh Ya’acob ... [et al.]. (2025) Jurnal Intelek, 20 (1): 7. pp. 69-80. ISSN 2682-9223

A phenomenological study exploring the challenges of establishing an effective hospitality work based learning program at UiTM / Khairil Anuar Bahari ... [et al.]. (2025) Jurnal Intelek, 20 (1): 8. pp. 81-93. ISSN 2682-9223

Uncovering key themes in sustainable HRM: a data-driven analysis using topic modelling / Kardina Kamaruddin and Noor Malinjasari Ali. (2025) Jurnal Intelek, 20 (1): 9. pp. 94-106. ISSN 2682-9223

Sustainability performance, ownership structures, and corporate financial stability of shariah-compliant companies in Malaysia / Mohamad Azwan Md Isa, Norashikin Ismail and Mohd Halim Kadri. (2025) Jurnal Intelek, 20 (1): 10. pp. 106-124. ISSN 2682-9223

Factors influencing apartment rental prices in Kuala Lumpur: a statistical analysis / Nur Shamilah Shah Kirit ... [et all.]. (2025) Jurnal Intelek, 20 (1): 11. pp. 125-135. ISSN 2682-9223

Langkawi residents’ dining preferences: a behavioural study of local restaurant patronage / Nur’Alia Natasya Mohd Khasmi ... [et al.]. (2025) Jurnal Intelek, 20 (1): 12. pp. 136-148. ISSN 2682-9223

Does ownership concentration affect financial performance? evidence of Malaysian healthcare sector / Noor Sharida Badri Shah ... [et al.]. (2025) Jurnal Intelek, 20 (1): 13. pp. 149-162. ISSN 2682-9223

The role of financial literacy in shaping stock market investment behaviour of generation Z in Klang Valley / Nur Aqilah Zainordin ... [et al.]. (2025) Jurnal Intelek, 20 (1): 14. pp. 163-171. ISSN 2682-9223

Exploring augmented reality applications in Malaysian construction industry / Muhammad Izzat Said ... [et al.]. (2025) Jurnal Intelek, 20 (1): 15. pp. 172-184. ISSN 2682-9223

Factors affecting millennial tourists’ behavioral intention in using user-generated content for travel planning / Liana Syazwani Muhamad Zamari ... [et al.]. (2025) Jurnal Intelek, 20 (1): 16. pp. 185-191. ISSN 2682-9223

The path to perfect stays: understanding brand image and technological convenience impact on customer satisfaction in Penang’s luxury hotels / Mohd Zool Fadli Ibrahim ... [et al.]. (2025) Jurnal Intelek, 20 (1): 17. pp. 192-201. ISSN 2682-9223

Investigating the connection between safety culture, affective commitment, and organizational performance in manufacturing industry / Muhammad Zulhilmi Ibrahim, Nur Ashikin Johari and Nurul Hidayana Mohd Noor. (2025) Jurnal Intelek, 20 (1): 18. pp. 202-213. ISSN 2682-9223

The effectiveness of outdoor recreation programs in fostering interpersonal communication skills and group cohesiveness / Muhammad Irfan Azhari ... [et al.]. (2025) Jurnal Intelek, 20 (1): 19. pp. 214-223. ISSN 2682-9223

Setting the standard: a bibliometric analysis of leadership styles and their effect on job performance / Rosliza Md Zani ... [et al.]. (2025) Jurnal Intelek, 20 (1): 14. pp. 225-238. ISSN 2682-9223

Assessing alternative assessment for psychomotor domain in engineering education: insights from a qualitative case study analysis / Nur Asmaliza Mohd Nor ... [et al.]. (2025) Jurnal Intelek, 20 (1): 15. pp. 240-254. ISSN 2682-9223

Bibliometric analysis of financial literacy level / Auryn Rahiem, Hasyeilla Abd Mutalib and Norhisam Bulot. (2025) Jurnal Intelek, 20 (1): 16. pp. 254-264. ISSN 2682-9223

The symbolism of the motif Malay cucuk sanggul / Aiqa Afiqah Isnin, Arbai’yah Ab Aziz and Mohamad Kamal Abd Aziz. (2025) International Journal of Art and Design (IJAD), 9 (1). pp. 15-27. ISSN 2710-5776 (Submitted)

Youth spaces and places design for the development of socio-spatial communal values / Alice Sabrina Ismail. (2025) International Journal of Art and Design (IJAD), 9 (1). pp. 1-14. ISSN 2710-5776 (Submitted)

A study of Rehals forms in the National Museum collection / Nor Amizah Abd Jamil, Arba’iyah Ab. Aziz and Mohamad Kamal Abd. Aziz. (2025) International Journal of Art and Design (IJAD), 9 (1). pp. 34-47. ISSN 2710-5776 (Submitted)

Systematic module of waste management disposal process in Al-Quran production industries / Ahmad Taufiq Abdul Aziz, Noor Azly Mohammed Ali and Nasaie Zainuddin. (2025) International Journal of Art and Design (IJAD), 9 (1). pp. 28-33. ISSN 2710-5776 (Submitted)

Semiotic in narrative of video games: a case study of detention (2017) / Johann Mikail Mazlan and Nelysa Nurshafira Mohd Roslan. (2025) International Journal of Art and Design (IJAD), 9 (1/SI). pp. 26-41. ISSN 2710-5776 (Submitted)

Exploring female character costumes and representation in cartoon network's adventure time / Lini Lis Aisya Fadzili and Norhasheila Muharam. (2025) International Journal of Art and Design (IJAD), 9 (1/SI). pp. 11-25. ISSN 2710-5776 (Submitted)

Exploring exaggeration in animation: a case study of one piece (2023) / Dhiya Qayyum Iman Ariffin and. (2025) International Journal of Art and Design (IJAD), 9 (1/SI). pp. 1-10. ISSN 2710-5776 (Submitted)

Hikayat Putera Indra: a digital pop-up Augmented Reality (AR) book using hybrid animation as a medium for digital preservation of Malay traditional attire (Samping Songket) / Muhammad Ikhmal Jamaludin … [et al.]. (2025) International Journal of Art and Design (IJAD), 9 (1/SI). pp. 42-58. ISSN 2710-5776 (Submitted)

Thermal characterization of silver-based conductive polymers for flexible electronics / Zuraihana Bachok ... [et al.]. (2025) Scientific Research Journal, 22: 1. pp. 1-18. ISSN 1675-7009

The properties of sustainable fired clay bricks incorporating eggshell and recycled glass waste / Ahmad Humaidi Abu Hanifah, Natasha Ahmad Nawawi and Maryam Mohammad. (2025) Scientific Research Journal, 22: 2. pp. 19-35. ISSN 1675-7009

Investigating the influence of print settings on PLA filament using the Espresso F220 3D printer / Ani Amanina Anuar ... [et al.]. (2025) Scientific Research Journal, 22: 3. pp. 37-53. ISSN 1675-7009

In-depth analysis of the biomechanical performance of dental implants: square vs. spiral thread designs under chewing conditions / Marsya Athirah Ahmad Kamal ... [et al.]. (2025) Scientific Research Journal, 22: 4. pp. 55-72. ISSN 1675-7009

Preserving freshness: alternative collection bags for extended leaf longevity in Solanaceae explants for in-vitro culture / Nursuria Md Setamam and Norrizah Jaafar Sidik. (2025) Scientific Research Journal, 22: 5. pp. 73-90. ISSN 1675-7009

Optimizing silica extraction form rice ash: a comparative study of alkaline and acid leaching / Mohammad Yushaiman Habib Md Yusof and Mimi Azlina Abu Bakar. (2025) Scientific Research Journal, 22: 6. pp. 91-105. ISSN 1675-7009

Yield prediction of supercritical fluid extraction of Nigella sativa using neutral networks / Sarah Diana Isnin and Sitinoor Adeib Idris. (2025) Scientific Research Journal, 22: 7. pp. 107-119. ISSN 1675-7009

An investigation into the lifespan of brush dc motor with different oil properties / Nor Azirah Mohd Fohimi ... [et al.]. (2025) Scientific Research Journal, 22: 8. pp. 121-133. ISSN 1675-7009

An optimum combination of filament material and slicing software in improving the manufacturing performance of 3D-printed parts / Normariah Che Maideen ... [et al.]. (2025) Scientific Research Journal, 22: 9. pp. 135-149. ISSN 1675-7009

Synthesis of nanosilica form sugarcane bagasse using the sol-gel method for enhanced nano fluid applications / Kagren John Kumar ... [et al.]. (2025) Scientific Research Journal, 22: 10. pp. 151-170. ISSN 1675-7009

Overall thermal transfer value: a preliminary study of residential building in hot-humid climate / Norasikin Hussin ... [et al.]. (2025) Scientific Research Journal, 22: 12. pp. 189-205. ISSN 1675-7009

Silver nanoparticle synthesis and characterization for the treatment of ganoderma fungus / Harith Haikal-Haq Hidzir, Nurmiza Othman and Intan Sue Liana Abdul Hamid. (2025) Scientific Research Journal, 22: 13. pp. 207-221. ISSN 1675-7009

Cervical fusion cage lattice structure optimization using computational biomechanics / Norish Mohamad Azhari ... [et al.]. (2025) Scientific Research Journal, 22: 14. pp. 223-238. ISSN 1675-7009

Hybrid oxygen carrier system of formic and acetic acids for soybean oil epoxidation / Ahmad Shauqi Abrar Shahrizan and Mohd Jumain Jalil. (2025) Scientific Research Journal, 22: 15. pp. 239-250. ISSN 1675-7009

Exploring the utilisation of drone technology in construction: insights and practices within the Sarawak Region / Ervina Donnis and Mohamad Nidzam Rahmat. (2025) Built Environment Journal, 22 (1): 1. pp. 1-13. ISSN 2637-0395

Top priority characteristics of blue spaces design for stress reduction: a scoping review and Delphi technique among BlueHealth experts / Ammar Ayman Zaino, Jamalunlaili Abdullah and Aishath Rasiya. (2025) Built Environment Journal, 22 (1): 2. pp. 14-28. ISSN 2637-0395

GIS based analytical hierarchical process for ecotourism site suitability assessment / Ainon Nisa Othman ... [et al.]. (2025) Built Environment Journal, 22 (1): 3. pp. 29-42. ISSN 2637-0395

Evaluation of students’ engagement and motivation to participate in virtual events / Sheikh Ali Azzran Sh Said ... [et al.]. (2025) Built Environment Journal, 22 (1): 4. pp. 43-55. ISSN 2637-0395

Determining the key elements in maintenance planning of the Masjid Kariah in Malaysian perspective / Azhar Yusof, Mohammad Ridzuan Yahya and Mohd Saidin Misnan. (2025) Built Environment Journal, 22 (1): 5. pp. 56-70. ISSN 2637-0395

Automated detection of individual tree parameters using terrestrial laser scanning data / Mohamad Amirul Hafiz Md Shukri ... [et al.]. (2025) Built Environment Journal, 22 (1): 6. pp. 71-85. ISSN 2637-0395

Comparative evaluation of 3D building model using UAV photogrammetry and terrestrial laser scanner (TLS) / Golwes Edson Gaong ... [et al.]. (2025) Built Environment Journal, 22 (1): 7. pp. 86-104. ISSN 2637-0395

Enhancing sustainable development practices in the Malaysian construction industry: sustainable built environment, sustainable project management, and sustainable construction / Hasmawiah Mad Kaidi ... [et al.]. (2025) Built Environment Journal, 22 (1): 8. pp. 105-123. ISSN 2637-0395

Theoretical framework of green and blue spaces towards enhancing well-being for individuals with hoarding disorder / Wan Mohammad Zaeim Wan Mahadi ... [et al.]. (2025) Built Environment Journal, 22 (1): 9. pp. 124-141. ISSN 2637-0395

Modelling factors influencing the replacements’ characteristics of Malay reserved land using PLS-SEM in Klang Valley, Selangor, Malaysia / Mohammad Firdaus Ishak ... [et al.]. (2025) Built Environment Journal, 22 (1): 10. pp. 142-157. ISSN 2637-0395

Preparation and characterization of ramie fiber reinforcement on acrylonitrile butadiene styrene/cassava starch hybrid bio-composites / Basanta Kumar Behera. (2025) Journal of Mechanical Engineering (JMechE), 22 (1): 1. pp. 1-16. ISSN e-ISSN: 2550-164X

Position tracking control of an electromechanical hip-knee-ankle-foot orthosis / Zulkiffli Abd Kadir ... [et al.]. (2025) Journal of Mechanical Engineering, 22 (1): 2. pp. 17-29. ISSN e-ISSN: 2550-164X

Nanomaterial-enhanced self-consolidating high-performance concrete: investigating the effects of nano POFA incorporation / Nuradila Izzaty Halim ... [et al.]. (2025) Journal of Mechanical Engineering (JMechE), 22 (1): 3. pp. 30-45. ISSN e-ISSN: 2550-164X

The effect of fibre orientation on the density and tensile properties of basalt fibre/epoxy composites / Afiqah Nur Fatin Abdua and Nik Noor Idayu Nik Ibrahim. (2025) Journal of Mechanical Engineering (JMechE), 22 (1): 4. pp. 46-57. ISSN e-ISSN: 2550-164X

The effect of poly(butylene adipate-co-terephthalate) (PBAT)/ oil palm frond (OPF) composite with palm stearin as compatibiliser / Istikamah Subuki ... [et al.]. (2025) Journal of Mechanical Engineering (JMechE), 22 (1): 5. pp. 58-67. ISSN e-ISSN: 2550-164X

Hydrostatic pressure analysis of yarn composites patch for PVC pipes / Jamaliah Md Said ... [et al.]. (2025) Journal of Mechanical Engineering (JMechE), 22 (1): 6. pp. 68-78. ISSN e-ISSN: 2550-164X

Distortion behaviour analysis of additively manufactured inconel 718 using numerical computation / Azri Rahimi Abd Rahman ... [et al.]. (2025) Journal of Mechanical Engineering (JMechE), 22 (1): 7. pp. 79-89. ISSN e-ISSN: 2550-164X

Effect of implant positioning in cemented hip arthroplasty / Zaitul Asyikin Aznan ... [et al.]. (2025) Journal of Mechanical Engineering (JMechE), 22 (1): 8. pp. 90-103. ISSN e-ISSN: 2550-164X

Effect of bottom ash on rheological and physico-mechanical properties of high early strength self-compacting brick (HES-SCB) / Nazirah Mohd Apandi ... [et al.]. (2025) Journal of Mechanical Engineering (JMechE), 22 (1): 9. pp. 104-117. ISSN e-ISSN: 2550-164X

Direct integration mode superposition: a simple method for dynamic analysis of submerged floating tunnel (SFT) / Jamiatul Akmal ... [et al.]. (2025) Journal of Mechanical Engineering (JMechE), 22 (1): 10. pp. 118-136. ISSN e-ISSN: 2550-164X

Quantifying spasticity: developing a data-driven approach through the modified Ashworth scale and simulated spasticity model / Nurul Atiqah Othman ... [et al.]. (2025) Journal of Mechanical Engineering (JMechE), 22 (1): 11. pp. 137-153. ISSN e-ISSN: 2550-164X

Vehicle model development for energy consumption study: for diesel mining truck / Imanul Ilmi, Mohammad Adhitya and Seno Sahisnu Rawikara. (2025) Journal of Mechanical Engineering (JMechE), 22 (1): 12. pp. 154-175. ISSN e-ISSN: 2550-164X

A novel paradigm CNG dual-fuel strategy to reduce engine emission of a CRDI engine: a green fuel and multi-objective optimization approach / Jibitesh Kumar Panda ... [et al.]. (2025) Journal of Mechanical Engineering (JMechE), 22 (1): 13. pp. 176-190. ISSN e-ISSN: 2550-164X

Thermoregulatory comfort properties of sports jersey fabric: a review / Suraya Ahmad Suhaimi ... [et al.]. (2025) Journal of Mechanical Engineering (JMechE), 22 (1): 14. pp. 191-206. ISSN e-ISSN: 2550-164X

The investigation of additional cooling fan on the brake system to overcome the overheating issue: a case study of oil cooler retarder brake / Maulana Haydil Rahmadanur ... [et al.]. (2025) Journal of Mechanical Engineering (JMechE), 22 (1): 15. pp. 207-222. ISSN e-ISSN: 2550-164X

Preparation and characterization of PLA filaments for FDM 3D printing / Amir Yusuf Mohd Shukri ... [et al.]. (2025) Journal of Mechanical Engineering (JMechE), 22 (1): 16. pp. 223-232. ISSN e-ISSN: 2550-164X

A survey on content, layout and accessibility (CLA) of LAW083 MOOC among UiTM law foundation students / Mohd Safri Mohammed Na’aim ... [et al.]. (2025) International Journal on E-Learning and Higher Education (IJELHE), 20 (1): 1. pp. 7-35. ISSN eISSN: 3030-6663

Exploring the role of digital technology in enhancing culinary students' pronunciation of French terms / Mohamad Azli Razali ... [et al.]. (2025) International Journal on E-Learning and Higher Education (IJELHE), 20 (1): 2. pp. 37-57. ISSN eISSN: 3030-6663

Evaluating the effectiveness of MOOCs in developing agribusiness pitching skills: a study of agropreneurship diploma students / Jacqueline Joseph. (2025) International Journal on E-Learning and Higher Education (IJELHE), 20 (1): 3. pp. 59-71. ISSN eISSN: 3030-6663

Transforming AI-generated text-to-image concepts into functional final designs: a case study on lighting product design in industrial design education / Mohd Hamidi Adha Mohd Amin. (2025) International Journal on E-Learning and Higher Education (IJELHE), 20 (1): 4. pp. 78-88. ISSN eISSN: 3030-6663

The implementation of the lifelong learning micro-credential course among students from Universiti Tanjung Pura, Pontianak, Indonesia / Wan Anisha Wan Mohammad ... [et al.]. (2025) International Journal on E-Learning and Higher Education (IJELHE), 20 (1): 5. pp. 89-101. ISSN eISSN: 3030-6663

Open & distance learning (ODL): factors that affect mathematics results from undergraduate students’ perspective / Sumarni Abu Bakar, Faiqah Nabihah Kamsin and Mohd Rijal Ilias. (2025) International Journal on E-Learning and Higher Education (IJELHE), 20 (1): 6. pp. 103-121. ISSN eISSN: 3030-6663

A tool-centric framework for teaching undergraduate computer science students on operating system design / Sulastri Putit and Lenny Yusrina Bujang Khedif. (2025) International Journal of e-Learning and Higher Education (IJELHE), 20 (1): 7. pp. 123-135. ISSN eISSN: 3030-6663

Evaluating the efficacy of digital design platform in improving public speaking proficiencies / Nurfazlina Haris ... [et al.]. (2025) International Journal of e-Learning and Higher Education (IJELHE), 20 (1): 8. pp. 137-155. ISSN eISSN: 3030-6663

Online video usage in undergraduate research presentations and learning satisfaction: a comparative study of male and female students / Nurul Hidayana Mohd Noor and Hasnatulsyakhira Abdullah Hadi. (2025) International Journal of e-Learning and Higher Education (IJELHE), 20 (1): 9. pp. 157-179. ISSN eISSN: 3030-6663

Fostering novice programmer in learning basic concept in C++ programming using micro credential variable in C++ / Azlina Mohd Mydin ... [et al.]. (2025) International Journal of e-Learning and Higher Education (IJELHE), 20 (1): 10. pp. 181-191. ISSN eISSN: 3030-6663

This list was generated on Wed Apr 2 12:42:44 2025 UTC.