Items where Division is "Faculty of Applied Sciences" and Year is 2015

Finishing properties of shellac by using different viscosity and abrasive paper applied on sepetir (sindora spp.) / Atikah Ab Hamid. (2015) [Student Project] (Unpublished)

The synthesis and characterization of the biodegradable bioplastic from the cassava, potato and sweet potato starch / Nur Sa'adah Ab Latif. (2015) [Student Project] (Unpublished)

Properties of scarf joint with different angle using oil palm lumber and kelempayan / Mohd Yusmizan Ab Manan. (2015) [Student Project] (Unpublished)

Adhesion of nc lacquer on 3 different sanded surfaces of Kelempayan timber / Radhiah Abd Aziz. (2015) [Student Project] (Unpublished)

Properties of low density particleboard made from oil palm trunk (OPT) / Nur Afiqah Abd Halim. (2015) [Student Project] (Unpublished)

Solid liquid extraction for the evaluation of organophosphorus content in apple after washing treatment / Muhammad Nazirul Ikram Abd Jalil. (2015) [Student Project] (Unpublished)

Investigation of organophosphate content on pear after washing treatment using HPLC / Muhammad Firdaus Abd Wahab. (2015) [Student Project] (Unpublished)

Comparison between brown coir and white coir of the cocos nucifera for paper making/ Nurul Huda Abdul Karim. (2015) [Student Project] (Unpublished)

Production of biodiesel from palm oil catalyzed by alumina-supported and silica-supported catalyst / Rozaimy Abdul Rahim. (2015) [Student Project] (Unpublished)

Isolation of cellulose degrading bacteria (CDB) from mangrove soil / Adawiah Abdul Rahman. (2015) [Student Project] (Unpublished)

Photovoltaic (PV) system for global electricity / Nurshahida Abdul Rahman. (2015) [Student Project] (Unpublished)

Isolation of cellulose degrading bacteria (CDB) from oil palm plantation soil / Nurul Najwa Abdul Rahman. (2015) [Student Project] (Unpublished)

Design of stacking oriented coffee table/ Muhammad Syafiq Abdul Razak. (2015) [Student Project] (Unpublished)

Physical and mechanical properties of oil palm trunks / Muhamad Azlan Abdullah. (2015) [Student Project] (Unpublished)

The taxonomy of dragonfly from Universiti Teknologi MARA (UiTM) Pahang / Nurul Hajamiatul Masri Abdullah. (2015) [Student Project] (Unpublished)

Bending strength of bonded three selected malaysian timber species (sepetir, kelat and sesendok) with polyvinyl acetate (pvac) / Nur Aini Adawiyah Abdullah Sani. (2015) [Student Project] (Unpublished)

Synthesis of waste cooking oil-based polyol via dihydroxilation reaction / Norfareha Abu Bakar. (2015) [Student Project] (Unpublished)

Strength properties of single dowel joint using kelempayan wood and opt / Mohd Fazli Abu Hassan. (2015) [Student Project] (Unpublished)

Nail withdrawal of three selected Malaysian timbers / Mohamad Uzair Hazzard Ahmad Zaini. (2015) [Student Project] (Unpublished)

Buffer capacity effect of meranti pa'ang (shorea bracteolata) and sesenduk (endospermum diadenum) on the reactivity of urea formaldehyde and phenol formaldehyde adhesive / Muhammad Zakwan Amat Sa'aidi. (2015) [Student Project] (Unpublished)

Chemically activated leucaena leucocephala leaf powder as a adsorbent for Pb (II) removal from aqueous solution / Nur Aizad Azemi. (2015) [Student Project] (Unpublished)

Synthesized and characterization of sodium cobalt oxide as sodium-ion cathode batteries using sol-gel method / Nur Athirah Azhar. (2015) [Student Project] (Unpublished)

Properties of insulation board made from rice husk and waste paper / Ahmad Ariffuddin Bahrim. (2015) [Student Project] (Unpublished)

Preliminary assessment of selected heavy metals in indoor dust in Universiti Teknologi MARA (UiTM) Pahang / Naqiatul Intan Farhain Bakri. (2015) [Student Project] (Unpublished)

The fabrication and characterization of Nd doped SiO2P2O5 glass by the sol gel route / Nur Hafiza Bashiron. (2015) [Student Project] (Unpublished)

Coffee table with sliding book case / Che Mohamad Azrul Che Lah. (2015) [Student Project] (Unpublished)

Micropropagation of a medicinal herb, Tacca sp / Nurul Saidah Din. (2015) [Student Project] (Unpublished)

The effect of radical scavenging activity on Orange G dye degradation process using Fenton's reagent / Farah Izzati Farush Khan. (2015) [Student Project] (Unpublished)

The effects of Punica granatum juice on sperm's quality in obese rats / Farah Amalina Ghazali. (2015) [Student Project] (Unpublished)

Mechanical and physical properties of acacia mangium spp forwood cement board relation to particle size and cement ratio / Mohamad Dzulhelme Hairuddin. (2015) [Student Project] (Unpublished)

In vitro antibacterial and antifungal activities of Belimbing Buluh (Averrhoa bilimbi) leaves extracts against common human pathogen / Nur Izzati Hairuddin. (2015) [Student Project] (Unpublished)

In vitro regeneration of Hylocereus sp. / Nur Hidayani Hairuni. (2015) [Student Project] (Unpublished)

Properties of oriented strand board (OSB) from acacia mangium and rubberwood / Zainab Haris. (2015) [Student Project] (Unpublished)

Synthesis of waste cooking oil-based polyol via one-pot epoxidation and hydroxylation reaction / Nurul Syazana Hasmaruddin. (2015) [Student Project] (Unpublished)

Finishing properties of coffee table by using kelempayan (neolamarckia cadamba) / Hanis Afiqah Idrus. (2015) [Student Project] (Unpublished)

Properties of mixed species lamination product from khaya ivorensis and oil palm trunk / Nur Isfarina Ismail. (2015) [Student Project] (Unpublished)

Phytochemical and insecticidal activity of Orthosiphon stamineus leaves extracts against rice weevils (Sitophilus oryzae L.) / Nurshahira Ismail. (2015) [Student Project] (Unpublished)

Physical and mechanical properties of bayas wood (oncospema horridum) / Nur Syazwanie Jamal. (2015) [Student Project] (Unpublished)

Untreated red seaweed, Kappaphycus alvarezii as a biosorbent to remove Pb(II) ions from aqueous solution / Natalie James Solibun. (2015) [Student Project] (Unpublished)

Fractionation of methanol extract from the stem of Entada spiralis ridl using vacuum liquid chromatography and its preliminary phytochemical investigation of active components / Muhammad Qusyairi Jori Roslan. (2015) [Student Project] (Unpublished)

Physical and mechanical properties of three layered particleboard from Kelempayan (Neolamarckia Cadamba) and sawmill sawdust / Diana anak Julie. (2015) [Student Project] (Unpublished)

Compact book rack made from kelempayan (neolamarckia cadamba) and blockboard/ Sadam Kahar. (2015) [Student Project] (Unpublished)

The effect of enzyme immobilization on the performance of bio-battery / Muhammad Syafiq Zafran Kamarudzaman. (2015) [Student Project] (Unpublished)

The effects of Carica papaya juice on sperm's quality in obese rats / Nurliyana Khairul Kamal. (2015) [Student Project] (Unpublished)

Properties of wood plastic composite by using hibiscus cannabinus spp. (kenaf) as a raw material / Mohammad Zahin Khalil. (2015) [Student Project] (Unpublished)

Properties of particleboard from leuceana leucocephala wood/ Noor Zaliani Khozan. (2015) [Student Project] (Unpublished)

Properties of bio-composite products from acacia strand and coconut veneer / Siti Nadrah M. Omar. (2015) [Student Project] (Unpublished)

Distribution of atmospheric heavy metals concentration in total suspended particulate during day and night conditions / Khairul Azhar Mansor. (2015) [Student Project] (Unpublished)

Properties of particleboard made from rice husks and coconut husks in relation of varying resin content and board density / Mazlinda Marzuki. (2015) [Student Project] (Unpublished)

Effect of alkaline percentages on wood plastic composites properties / Muhammad Nabil Irsyad Masir. (2015) [Student Project] (Unpublished)

Side table from oil palm lumber (OPL) (Elaeis guineensis) / Muhammad Arbain Mat Yuti. (2015) [Student Project] (Unpublished)

Multipurpose table for kids / Zulkhanain Mat Zain. (2015) [Student Project] (Unpublished)

Machining properties of 25 and 50 years old treated oil palm lumber / Muhamad Hafiz Md Saad. (2015) [Student Project] (Unpublished)

Effect of physicochemical parameter on Cu (ll) ions adsorption by sulfuric acid treated spent grated coconut (Cocos nucifera) / Muhammad Yazid Misnan. (2015) [Student Project] (Unpublished)

Influence of oil palm trunk (elaeis guineensis) and acacia (acacia mangium) on the particleboard properties / Abdul Hakim Baihaqi Mohamad Noor. (2015) [Student Project] (Unpublished)

Phytoremediation of heavy metals pollutant in landfill area by Sida rhombifolia sp / Mohamad Norazlie Mohamad Razali. (2015) [Student Project] (Unpublished)

Determination of the stability of anthocyanins extracts from Plumeria rubra / Nadia Mohamed Yusoff. (2015) [Student Project] (Unpublished)

Design of multipurpose table based on anthropometric data / Nur Athirah Mohd Adzha. (2015) [Student Project] (Unpublished)

Heavy metals accumulation in topsoil surrounding Temerloh industrial area/ Nur Izatul Nabila Mohd Ali Hanafiah. (2015) [Student Project] (Unpublished)

Properties of acacia mangium wood cement board in relation to particle size and additives (na2si03) / Mohamad Alif Aizat Mohd Azhar. (2015) [Student Project] (Unpublished)

Extracellular biosynthesis of iron-based nanoparticles by isolated bacteria from soil / Durra Shahirah Mohd Azman. (2015) [Student Project] (Unpublished)

Finishing properties of two selected types of coating materials on sepetir wood / Fathin Shahirah Mohd Hamidi. (2015) [Student Project] (Unpublished)

Effect of the resin content and density on the properties of three layer particleboard from kelempayan (neolamarckia cadamba) and wood shaving / Abdul Halim Mohd Hatta. (2015) [Student Project] (Unpublished)

Properties of particleboard from acacia mangium spp. / Mohamad Amir Sabirin Mohd Nasir. (2015) [Student Project] (Unpublished)

Composition of selected heavy metal in rainwater collected from Universiti Teknologi MARA (UiTM) Pahang / Sairah 'Atiqah Mohd Nasir. (2015) [Student Project] (Unpublished)

Anatomical properties of kelempayan (neolamarckia cadamba) / Nursyuhada Mohd Nizam. (2015) [Student Project] (Unpublished)

The stability of betalains extract from Celosia cristata flower / Maizatul Akmar Mohd Redzuan. (2015) [Student Project] (Unpublished)

Extracellular biosynthesis of iron-based nanoparticles by bacteria isolated from water sediment / Siti Mariam Mohd Shah. (2015) [Student Project] (Unpublished)

Photovoltaic (PV) system for domestic electricity in Malaysia / Siti Norfadila Mohd Taib. (2015) [Student Project] (Unpublished)

Finishing properties of Japanese table by using Kelempayan (neolamarckia cadamba) / Suraya Mohd Yusof. (2015) [Student Project] (Unpublished)

The distribution of heavy metal concentrations surrounding Temerloh municipal solid waste landfill area / Nur Emyraa Mohd Yusop. (2015) [Student Project] (Unpublished)

Properties of paper by different species of light wood endospermum.spp (sesenduk) and neolamarckia cadamba (kelempayan)/ Farhah Mustaffa. (2015) [Student Project] (Unpublished)

In vitro antimicrobial activities of soursop (Annona muricata) leaves extract against common human pathogen / Nadia Nasir. (2015) [Student Project] (Unpublished)

Isolation and identification of bacteria from lichens of UiTM Pahang / Nurul Nadiah Raihana Nasoha. (2015) [Student Project] (Unpublished)

Standard blank for wood lamination on khaya ivorensis / Izzah Azimah Noh. (2015) [Student Project] (Unpublished)

Isolation of flavonoid in leaves of piper sarmentosum / Noorfazillah Othman. (2015) [Student Project] (Unpublished)

Properties of paper from cymbopogon nardus (serai wangi) by using different beating process/ Nor Amirah Othman. (2015) [Student Project] (Unpublished)

The performance of particleboard made from rice husk and coconut husk based on type density and type of raw material / Jonity Philip. (2015) [Student Project] (Unpublished)

Synthesis of hot melt adhesive by using hexamethylene diisocyanate / Nur Aqieemah R.A Sharifudin. (2015) [Student Project] (Unpublished)

Properties of particleboard from acacia mangium in relation to particle size/ Mohd Zaimy Ramli. (2015) [Student Project] (Unpublished)

Effect of zinc oxide and lead oxide on the physical properties of borate based glass/ Muhamad Farid Rosli. (2015) [Student Project] (Unpublished)

Fiber morphology and anatomical properties of mendong wood (elaeocarpus spp.) in Malaysia / Norsyazwani Saffuan. (2015) [Student Project] (Unpublished)

Screw withdrawal properties of glue-laminated timber made from kelampayan and sesendok / Nur Aisah Sajali. (2015) [Student Project] (Unpublished)

Properties of particleboard from oil palm trunk in relation to resin content and wax addition / Mohammad Akhmal Sakiman. (2015) [Student Project] (Unpublished)

Hybrid particleboard properties from acacia mangium and 'petal relalang' (leucaena leucocephala) using urea-formaldehyde resin / Mohamad Syazwan Saleh. (2015) [Student Project] (Unpublished)

Properties of particleboard from acacia mangium in relation to tree height portions/ Muhammad Badran Saleh. (2015) [Student Project] (Unpublished)

Influence of particle sizes in homogenous and heterogeneous wood cement board properties made from acacia mangium / Azlan Seraila. (2015) [Student Project] (Unpublished)

Synthesized and characterization of sodium cobalt oxide as sodium ion cathode batteries using solid state method / Nurulaini Syakira Shaharuddin. (2015) [Student Project] (Unpublished)

Finishing properties of lacquer by using different methods of application on sepetir / Noor Shafiqah Supangat. (2015) [Student Project] (Unpublished)

Properties of medium density fiberboard from rubberwood and leucaena in relation to wood ratio and resin content / Nur Othman Suratman. (2015) [Student Project] (Unpublished)

Effect of varying resin content and board densities on the properties of three layers particleboard from kelempayan. / Tuan Mohd Fakrul Tuan Ismail. (2015) [Student Project] (Unpublished)

Physical and thermochemical properties of oil palm trunk / Tuan Noradila Tuan Soh. (2015) [Student Project] (Unpublished)

Buffer capacity effects of delonix regia and hevea brasiliensis extractives on reactivity of selected adhesives / Alexander Vanessa. (2015) [Student Project] (Unpublished)

Properties of hybrid particleboard from acacia mangium and petal belalang using phenol formaldehyde resin / Wan Hazwani Wan Hassan. (2015) [Student Project] (Unpublished)

Multifunctional storage with table and chair/ Wan Muhammad Hilmi Wan Ibrahim. (2015) [Student Project] (Unpublished)

Water quality and dissolved metals assessment in four selected urban rivers in Kuantan, Pahang / Wan Muhamad Isharman Wan Ismail. (2015) [Student Project] (Unpublished)

Soil contamination and soil properties analysis in UiTM Pahang / Wan Akmal Zulaikha Wan Mohamad. (2015) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Properties of particleboard from fresh and degraded acacia wood/ Wan Mohammad Hanif Wan Mohd Yusoff. (2015) [Student Project] (Unpublished)

Properties of hybrid particleboard from acacia (acacia mangium) and oil palm trunk (elaeis guineensis) / Wan Jamalludin Wan Omar. (2015) [Student Project] (Unpublished)

Fractionation of methanol extract from the leaves of entada spiralis ridl. (Sintok) using vacuum liquid chromatography and its preliminary phytochemical investigation of an active components / Mohd Ardyka Yahya. (2015) [Student Project] (Unpublished)

Phytochemical and antibacterial activity of the leaves extract of Ziziphus mauritiana / Noor Atela Yahya. (2015) [Student Project] (Unpublished)

Performance of finger joint from Sepetir / Yuhanis Yunus. (2015) [Student Project] (Unpublished)

Properties of hybrid board from rice husk and rubberwood fiber / Moho Haziq Zulfadhli Zahari. (2015) [Student Project] (Unpublished)

The taxonomy of butterfly from Universiti Teknologi MARA (UiTM) Pahang / An Nuur Waliyah Zaimustapar. (2015) [Student Project] (Unpublished)

Production of biodiesel from rubber seed oil catalyzed by egg shell / Nadia Zakariya. (2015) [Student Project] (Unpublished)

Properties of nail withdrawal holdings on Kelempayan Timber (Neolamarckia Cadamba) / Muhammad Zahid Akmal Zawil Anuar. (2015) [Student Project] (Unpublished)

Properties of paper pandanus amaryllifolius by using different pulping time/ Norhafiza Zulkifli. (2015) [Student Project] (Unpublished)